4.5.1.1 Creating a New Test Setup Select the New Test symbol to create a new test setup. When the New Test symbol is selected, L3 Series software opens to the test configuration view. This view shows the major sections that define a test: • Pre Test section • Data section • Post Test section The symbols at the bottom of the view are the various test step types, including if purchased for your system, additional optional functions such as the functions for logic control using the L3 Automation Builder. When you create the test setup using the test steps, the Test section of your test setup is constructed and appears between Pre Test and Data. Each of these test sections are described in Section 3, Creating a Test .
4.5.1.2 Opening a Test Setup You may open a test setup using the Open Test symbol. This is useful if you have a large number of tests that may be cumbersome to locate in the test directory. Select the Open Test symbol and L3 Series software opens the Metlogix/Test directory where your actual test setups are stored. Select the test you require from the directory and that setup is launched in your L3 environment.
Select the “Open Test” symbol to open a test or a template using the Metlogix directory
Main Home menu Open a Test or Template symbol
Main Home menu Create New Test symbol
Metlogix/Tests Sub-directory Shows where test files are stored and saved
Select the New Test symbol to create a new test method using the L3 Test Builder.
starrett.com
21
Made with FlippingBook - professional solution for displaying marketing and sales documents online