5.8.3 Average Algorithm The Average algorithm calculates the load for all of the data points within the scope range. The average load or distance may be calcu- lated. The Average algorithm differs from the Average Peak & Valley algo- rithm. The Average Peak & Valley algorithm is the average of only the peaks or valleys. The Average algorithm is the average of all data points within your scope range. NOTE The Average algorithm is the average of all data points for your specified scope range.
5.8.3.1 Average Algorithm Scope The scope for the Average algorithm is based on two specific points that defined the end points of a data segment.
You may position the scope handles along either the y-axis or x-axis to define the data segment where you are interested in analyzing.
Or, you may implicitly specify your start and end scope points using values or other coefficients that can be used as anchors. Anchored coefficients display in yellow. The scope range is normally not at the start of the test since the mini- mum result would be zero or at the load when the test started. 5.8.3.2 Average Algorithm Name The Average algorithm name may be changed from its default of Lavg when based on load.
The result name may be up to 8 characters in length and may use special characters.
Break Test Shows Lavg result for specified scope range
starrett.com
49
Made with FlippingBook - professional solution for displaying marketing and sales documents online