Operations training
High Voltage Standard / V1 02072025
5.5 Validity Period
The GWO High Voltage Standard modules are valid for the period stated below.
High Voltage Operations High Voltage Operations is an enduring qualification based on the expectation that the participant is actively working under supervision in a wind industry HV environment, on the path to becoming an authorised person for HV operations. Timely progression from initial training to achieving authorisation should be expected, normally within a period of 3 years. If progression to authorisation is not achieved within a timely period, then retraining needs should be considered to ensure compliance per company policy or local compliance requirements.
Once achieving the status of a HV authorised person, it would not normally be expected to repeat this training.
High Voltage Cable Pulling High Voltage Cable Pulling is an enduring qualification. This is based on the expectation that the participant is actively working in a wind turbine environment and involved in HV cable pulling operations.
If there is an extended period of absence from applying the skills, retraining and recertification may be required according to company policy or local compliance requirements.
5.6 Course Codes
Module
Course Code
High Voltage Operations
HVOP
High Voltage Cable Pulling
HVCP
Table 5.6.1 - Course codes for HV standard modules
5.7 Participant Prerequisites All participants must meet the participant prerequisites described in the GWO Requirements for Training, as well as those detailed below for each module. Training providers must apply additional participant prerequisites as necessary to comply with an employing company policy or any local regulatory compliance requirement. High Voltage Operations - Participant Prerequisites Participants attending this training must possess underpinning knowledge, skills, abilities in safe low voltage electrical working. They must have the capability to perform tasks while exposed to low voltage hazards and risks and have electrical workplace experience, to be technically capable to participate and succeed in the training. They must have completed training equivalent to GWO BTT Electrical and GWO CoHE Electrical.
Global Wind Organisation / www.globalwindsafety.org
12 / 120
Made with FlippingBook Online newsletter maker