8.10.4 Noise Filter The Noise filter is used to set the sensitivity of the load cell sensor and its noise dampening capability. The Noise Filter default is 0.01% of the connected load cell sensor. In most applications this value should NOT be changed. However, in certain extreme conditions, there may be too much noise on the load signal that you need to dampen the signal in order to obtain a more precise load point on your graph. To do this, you can experi- ment by increasing this noise setting from 0.01% to 0.02%. This effectively increases the measurement band around a point, making it more precise in identifying a specific load scope point. 8.10.5 Sort Recent Test List By You may specify how test setups appear on your Home menu. Tests may be listed by their Name alpha-numerically, or they may be listed based on “last used”. A test that was used most recently will appear at the top of the list of test setups. If you have a large number of test setups, you may also use your keyboard to filter the test names. Type the first few characters of your test using your QWERTY keyboard and the list of test names will be filtered showing only the test names with the characters you typed.
L3 TESTS Setting Shows tests to be sorted by Last Used in the Home menu
Most currently used test setup.
Test setup that represents the “oldest”, the test that hasn’t been used recently.
L3 TESTS Setting Shows tests to be sorted by Name (alpha-numerically) in the Home menu
Press the Home symbol to return to the full listing of test setups on the Home menu.
Sorted alpha-numerically
L3 Home menu Shows test names filtered after entering character “L”
starrett.com
21
Made with FlippingBook - professional solution for displaying marketing and sales documents online