8.13.4 Shutdown Computer on Exit The “Shutdown computer on Exit” function, when set to Yes, will automatically close the L3 application and shut down the workstation when the user logs out. If the Shutdown computer on Exit = No, the computer will remain powered up after logging out of the L3 application. 8.14 Display Formats Setting Units of measure are setup using the Display Formats setting. The L3 system lets you use S.I. or Imperial units. However, you cannot used mixed units of measure- combination S.I. and Imperial. NOTE System units of measurement may use either S.I. or Imperial units but not both. Mixed units are not permitted.
8.14.1 Current Flags The “flags” or “units of measurement” used within the L3 application may be changed by the user. Units of measurement may use either the S.I. (metric) units or the imperial units. The user must select either S.I. or Imperial. NOTE L3 system units of measurement may be either S.I. or imperial. NOTE You may not have mixed units of measurement within your operating system. For example, you cannot have mm (millimeters) for distance measurement and lbf (pound- force) for load measurement.
The default flags are listed in the table.
Flag Description
Factory Default
Height
D (normal mode for Distance)
Distance
mm
Load
N
Stress Strain
MPa
%
Work
Joules
Rate-Time
Minutes Units of Measurement
Select the mode of units: S.I. (Metric) or Imperial (English)
L3 DISPLAY FORMATS
30
Made with FlippingBook - professional solution for displaying marketing and sales documents online