8.14.1.1 Height Flag The Height flag is used to represent the operating mode of the system. The Height mode measures height based on a user-set datum. The letter “D” is used to designate the “normal” operating mode.
8.14.1.6 Work Flag Work or energy are used to measure resilience. Work is determined by the area beneath the graph. The units of measure for Work (energy) are:
S.I. Units Joule (J)
Imperial Units
8.14.1.2 Distance Flag The units of measure for Distance are:
in-lbf
Kilojoule (kJ) Millijoule (mJ) J/mm^3
in-lbf/in^3
S.I. Units
Imperial Units
mm
in
kJ/mm^3 mJ/mm^3
cm
Distance Units of Measurement
Work Units of Measurement
8.14.1.3 Load Flag The units of measure for Load (force) are:
8.14.1.5 Rate-Time Flag The units of measure for Rate-Time are:
S.I. Units
Imperial Units
S.I. Units Seconds Minutes
Imperial Units
N
lbf
Seconds
kgf
Minutes Rate-Time Units of Measurement
Load (Force) Units of Measurement
8.14.1.4 Stress Flag The units of measure for Stress are:
8.14.2 Display Resolution Settings The resolution settings are used to establish the significant digits displayed for a variable. When resolutions are adjusted, they should be done so in accordance with the specifications of the test frame and load cell sensor. When very high resolution is used, it is recommended that Notation be used. The L3 system may use Engineering Notation.
S.I. Units
Imperial Units
GPa
PSI
MPa N/cm 2 kgf/cm 2 kgf/mm 2
Stress Units of Measurement
8.14.3 Use Comma for Radix The radix may be either a period or comma.
8.14.1.5 Strain Flag The units of measure for Strain are: S.I. Units Imperial Units % % [null] [null] Strain Units of Measurement
8.14.4 Date Format The date format my be either MM/DD/YY or DD/MM/YY.
starrett.com
31
Made with FlippingBook - professional solution for displaying marketing and sales documents online