3.4.4.4 Peak/Valley Count Coefficient The Count coefficient counts the number of peaks or valleys within your test or within your specified scope range. Sensitivity is used to define what is classified as a peak or a valley. You can use the peak or valley numbers as anchors to calculate delta or averages. For example, you may want to calculate the delta in load between the first peak and the 10th peak within your test range.
Shows the valley count = 10 between the scope range of 13.3 and 23.8 seconds. The green lines shows the count range.
Shows the peak count = 20 between the scope range from the Start and Finish. The grey lines shows the count range. It is grey because it is not currently active and being used for other coefficients.
Shows the delta using LPt and LPt2.
L3 Peak & Valley test showing Counts for the number of valleys in a scope range Delta load is calculated between the first and last valley within the range
62
Made with FlippingBook - professional solution for displaying marketing and sales documents online