20250702 Solar Technical Training v1

Technical training

Solar Technical Training Standard / V1 02072025

ELEMENT 11.6 - CUTTING AND CRIMPING CABLES

Learning objectives:

85) The participants can perform the cutting and crimping of small signal and main power LV cables (Skills, intermediate level)

The instructor shall:

Explain the different types and purposes of tools used for cutting and crimping cables:

a.

knives and special cutting tools

b.

stripping tools to remove cable insulation

c. crimping tools for signal cables and main cables: manual and hydraulic tools

Explain and demonstrate how to cut and crimp small signal cables:

a.

shielded and unshielded

b.

rubber and PVC insulation types

Explain and demonstrate how to cut and crimp main LV power cables:

a. copper and aluminium (special attention to correct cable die-set)

b.

rubber and PVC insulation types

c. install heat/cold shrink tube on top of cable and cable lug, after cable lug has been crimped

Facilitate practice for the participants in cutting and crimping small signal cables and main LV power cables

Give constructive feedback on the participants’ cutting and crimping of small signal and main LV power cables

The participants shall:

Practice cutting and crimping small signal cables:

a.

shielded and unshielded

b.

rubber and PVC insulation types

Global Wind Organisation / www.globalwindsafety.org

50 / 100

Made with FlippingBook Ebook Creator