Technical training
Solar Technical Training Standard / V1 02072025
LESSON 5 - ELECTRICAL MEASURING INSTRUMENTS
60 min.
The aim of this lesson is to give the participants the basic knowledge about the correct and safe way to measure current, voltage, resistance, continuity, diodes and capacitance.
ELEMENT 5.1 - SYMBOLS AND SETTINGS ON ELECTRICAL INSTRUMENTS
Learning objectives:
76) The participants can recognise the symbols and settings used for current, voltage and resistance in the measuring instruments (Knowledge, basic level)
77) The participants can describe how to identify the validity of tools (Knowledge, basic level)
The instructor shall:
Explain and demonstrate settings on the Electrical Measuring Instruments including:
a.
VAC and VDC
b.
A and mA
c.
Ohms/continuity
Explain and demonstrate the visual inspection of test instruments and leads
Facilitate discussions with the participants about how to identify the validity of tools
The participants shall:
Engage in discussions about how to identify the validity of tools
ELEMENT 5.2 - HOW TO MEASURE WITH ELECTRICAL MEASURING INSTRUMENTS
Learning objectives:
78) The participants can perform the measurement of current, voltage, resistance, PT100, continuity, diodes, bridge rectifiers and capacitance (Skills, intermediate level)
Global Wind Organisation / www.globalwindsafety.org
85 / 100
Made with FlippingBook Ebook Creator