Technical training
Solar Technical Training Standard / V1 02072025
ANNEX 1 - EQUIPMENT LIST
The following pages contain the lists of equipment required for delivering the Solar Technical Training Standard. The tools, materials and equipment listed are needed for the execution of the modules must be available and must fulfil national legal requirements where applicable. Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards. Each participant shall have access to a tool kit which contains sufficient tools for them to be able to complete the exercises as detailed in the module and shall be provided with PPE appropriate to the task they are performing.
All equipment shall be maintained and where appropriate, inspected and tested in accordance with current national standards/ legislation and manufacturers’ recommendations.
Note
1.
Equipment list: S-TT Installation Module
The following equipment is required during the entire duration of this training to meet the needs of the S-TT Installation Module:
PPE suitable for mechanical and installation work •
Mechanical gloves, safety shoes or boots and working clothing, safety coverall, safety googles that can be worn on top of prescription glasses, general protective work clothing
Tools suitable for mechanical and installation work • An impact gun
•
Spanners (1 per two participants)
•
Torque wrenches (at least two different ranges)
•
Sockets
•
Screwdrivers
•
Cable ties
•
Heat shrinks / cold shrinks
•
Hexagon (Allen) keys
• Tool set for cutting, stripping and crimping small cables (smaller than 6mm2) – 1 set for 2 participants
Global Wind Organisation / www.globalwindsafety.org
93 / 100
Made with FlippingBook Ebook Creator