7.2.4 Tests The Tests setting is used to specify how certain Test functions perform. These settings include the ability of the user to edit a locked test; the use of prefixes in the test name; test numbering, and how tests appear on the main Home Menu.
Test setups may be locked by the creator. If the user has Test Authoring rights, and this setting = YES, the user can edit, copy or delete a test setup. If the setting = NO the user cannot edit, copy or delete a test setup.
When a new test is created, it is automatically named with this prefix. A prefix might be used for a lab, department, user, etc.
When a new test is created, it is given a number. The number identifies the test setup, which can be renamed.
Tests Settings
Test setups listed on the main Home menu can be listed based on their name (alphabetically), or based on “last used”.
The default is 0.01% of the connected load cell sensor. In most applications this value should NOT be changed. However, in certain extreme conditions, there may be too much noise on the load signal that you need to dampen the signal in order to obtain a more precise load point on your graph. To do this, you can experiment by increasing this noise setting from 0.01% to 0.02%. This effectively increases the measurement band around a point, making it more precise in identifying a specific load scope point.
Here, test names are listed by Name.
Shows a test that is “locked” by the author. Cannot be edited, except by the author.
Red text indicates the test setup was created on an unlicensed system, or a system that is not compatible with the current system.
12
Made with FlippingBook - professional solution for displaying marketing and sales documents online