TECHNICAL GUIDE & PRODUCT USER MANUAL
HARNESS FITTING INSTRUCTIONS
CROSSOVER HARNESS
1 2 3
Inspect Harness to AS/NZS 1891.4 requirements. Refer to Inspection Criteria in manual. Undo all buckles and shake to untangle.
Hold harness to your left side by left shoulder strap and right shoulder buckle and slip on shoulders sideways holding large part of buckle in right hand.
Connect the side buckles (above and below the front D Ring). Ensure rear D Ring can be reached.The harness should now hang nicely with leg straps hanging. Check for no twists.
www.bsafe.com.au 1300 783 606
18 I
Made with FlippingBook - Online magazine maker