HOW TO INSTALL ENHANCE STEEL RAIL – TRADITIONAL RAIL CONFIGURATIONS/ CONTINUED
Traditional Rail Panel with Pressure-Treated Post and Post Sleeve Configuration
6
6. Secure 2 x 4 to
top rail using Trex Cocktail Bracket (sold separately). Ensure that there is a bracket at each end of the railing section, then space brackets approximately every 24" and attach with 4 screws provided.
NOTE: Predrilling before attachment is recommended.
1. Follow steps on previous pages for installing brackets, panels, and bracket covers.
7
7. Pre-drill a pilot hole
and toenail 2-1/2" (6.4 cm) screw at each end of 2 x 4 into post on back side of rail (side not facing decking).
Attaching 2 x 4 to Top Rail 2. Measure between posts and cut 2 x 4 to length.
3
3. Place 2 x 4 on top rail.
4. O n underside of 2 x 4, mark outline of
bracket cover location.
8. Attach post caps to post sleeves using external grade PVC
8
construction adhesive (apply adhesive on the inside self-centering/ corner tabs).
Post sleeve
5. Remove 2 x 4 from rail. Using a router bit, forstner bit, or something similar, rout out this area to allow 2 x 4 to fully seat onto top rail.
7
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
EHSRHZ-0225
Made with FlippingBook. PDF to flipbook with ease