Defoamer 2.0 NEW and IMPROVED
1941
Defoamer 2.0
PRINCIPAL FUNCTIONING AGENTS Polydimethyl Siloxane .......................................................................................10.0% CONSTITUENTS INEFFECTIVE AS A SPRAY ADJUVANT ...............90.0% TOTAL .................................................................................................................. 100.0% CA Registration No . : 52287-50040-AA PRECAUTIONS Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not contaminate food, feed, seed or water supplies during application or when cleaning equipment. IN CASE OF SPILL OR MEDICAL EMERGENCY, CONTACT CHEMTREC 1-800-424-9300. FIRST AID If on Skin: Wash with soap and water. Consult a physician if any irritation persists. If in Eyes: Rinse with clean water for 15 minutes. Remove contact lenses after the first 5 minutes and continue to rinse. Seek medical attention if irritation persists. If Ingested: Rinse mouth. Do Not induce vomiting. Call 911 or a physician for treatment advice. Have the product label with you when calling a doctor or going for treatment. KEEP OUT OF REACH OF CHILDREN Read entire label for additional precautionary statements and use directions. FOR PROFESSIONAL USE ONLY
PRODUCT INFORMATION Defoamer 2.0 can control foaming of spray mixtures. The reduction of foam can reduce mixing and filling times and material loss caused by foaming-over of spray tanks. Harrell’s Defoamer 2.0 formula is designed to prevent foam formation as well as provide curative knock down of foam that has previously formed. Defoamer 2.0 is a highly active, nonionic, silicone, defoamer designed to eliminate foam in a variety of applications.
1 quart (946 ml) Weight per gallon: 8.34 lbs. @ 70 °F NET CONTENTS
Harrell’s, LLC | (800) 282-8007 Post Office Box 807 | Lakeland, FL 33802
DEFOAMER 2.0 WORKS FAST
#HSMDEF2 06/20
Defoamer 2.0 1QT HSMDEF2.indd 1
6/10/2020 1:09:09 PM
FEATURES & BENEFITS: • Rapidly reduces foaming during spray tank fill ups • Highly active defoamer for a variety of applications • Can be used preventatively or curatively
Defoamer 2.0 – 3 Minutes After Treatment
Before Adding Defoamer 2.0
PRINCIPAL FUNCTIONING AGENTS Polydimethyl Siloane.....................................................................................10.0% CONSTITUENTS INEFFECTIVE AS A SPRAY ADJUVANT.......................90.0% TOTAL ...............................................................................................................100.0%
RECOMMENDED RATES: Add Harrell’s Defoamer 2.0 at a rate of 1-4 ounces per 100 gallons of spray solution.
1 QUART (946 ml) Weight per gallon: 8.34 lbs. @ 70 °F
DIRECTIONS FOR USE: Shake or agitate before use.
For preventative defoaming: add 1 - 4 ounces of Harrell’s Defoamer 2.0 to a partially waterfilled tank first and agitate briefly before adding other products to the water then add remaining water and begin tank mix agitation. Urea water solution may require the higher use rate range for this product. If foaming re-develops after the tank mix level drops, stop agitation and add an additional 1 oz. of Harrell’s Defoamer 2.0.
(800) 282-8007 | Harrells.com Post Office Box 807 | Lakeland, FL 33802
Made with FlippingBook - Online Brochure Maker