Preparation and bonding
Windshield instal- lation & assembly
Removal
Windshield removal using wire or knife Windshield removal
Removal of decorative moldings | Removal of the wiper arm
Cleaning | Pre-treatment | Bonding
Good to know! Unrestricted access is required when replacing the windshield. Würth offers you the correct tools for removing all external parts such as wipers and decorative moldings.
Removing the parts Unrestricted access is required for the removal of the wind- shield. Therefore you must first remove all external parts. • Removing decorative moldings: It is fast and simple to remove the clips using the 4-piece Würth assembly wedge set. The glass fiber-reinforced plastic prevents the bodywork from becoming deformed or damaged during removal. • Removing the windshield wiper: Loosen the dust caps using the clip remover and then the screw connection on the wiper arm using the lever reversible ratchet. Simply remove the wiper arms using the pole terminal puller with a push-and-pull movement. Attention: When aluminum and steel meet, this may lead to contact corrosion on the connection. Damage or deformations are therefore to be expected when this connection is released.
Würth Perfection Line Windshield Replace- ment Video Instructions: SCAN NOW!
THEME AUTOMOTIVE GLAZING
4
Made with FlippingBook Annual report maker