Preparation and bonding
Windshield instal- lation & assembly
Removal
Windshield removal using wire or knife Windshield removal
Removal of decorative moldings | Removal of the wiper arm
Cleaning | Pre-treatment | Bonding
Good to know! Windshield removal is possible through various work steps and removal systems. You can get the right tool from us for every application.
Removing the windshield perfectly It takes several, consecutive steps to remove the front windshield. The wind- shield removal set includes the right tool for every step: • To remove the windshield, you must pierce the adhesive bead using the probe included in the set. The cutting cord is suitable for windshields with a particularly narrow clearance. Our tip: Pro- tect the surrounding bodywork attachments with Würth fabric adhesive tape. • Fasten the cutting cord to the probe. When carrying out this step, ensure that the cutting cord is run under the edge of the windshield. • Attach the cord inside the vehicle to the removal tool: Ensure that you then position the tool opposite the puncture site therefore generating sufficient vacuum. Perfect hold is guaranteed when you activate the pump function until the red marking can no longer be seen. Repeat this step three times to reach each corner of the screen. • Cut back the adhesive bead using the universal scraper and knife set.
Removing the wind- shield perfectly. Video
instructions: SCAN NOW!
THEME AUTOMOTIVE GLAZING
8
Made with FlippingBook Annual report maker