Turning Grooving
Grooving-Turning Series
GS: Double-edged inserts applicable to external, internal and face turning, grooving and parting off
● Good Conditions Bad Conditions
General Conditions
Machining conditions
●
● ● ●
Cutting parameter
Dimensions
P
M K S N
Inserts
Product code
Grooving
Turning
CW RE INSL S
f (mm/rev) Ap (mm) ATD 200E020-GS 0.04-0.20 0.05-0.20 0.30-1.5 2 0.20 20.70 5.1 ● f (mm/rev) ATD 300E020-GS 0.04-0.20 0.05-0.20 0.30-2.0 3.00 0.20 20.70 5.1 ● ATD 300E040-GS 0.04-0.20 0.05-0.20 0.45-2.0 3.00 0.40 20.70 5.1 ● ATD 310E020-GS 0.04-0.20 0.05-0.20 0.25-2.0 3.15 0.20 20.70 5.1 ● ATD 318E020-GS 0.04-0.20 0.05-0.20 0.25-2.0 3.18 0.20 20.70 5.1 ● ATD 318E040-GS 0.04-0.20 0.05-0.20 0.45-2.0 3.18 0.40 20.70 5.1 ● ATD 318E080-GS 0.04-0.20 0.05-0.20 0.85-2.0 3.18 0.80 20.70 5.1 ● ATD 361E030-GS 0.04-0.20 0.06-0.23 0.35-2.0 3.61 0.30 20.70 5.1 ● ATD 396E020-GS 0.05-0.25 0.07-0.25 0.25-2.50 3.96 0.20 20.70 5.1 ● ATD 396E040-GS 0.05-0.25 0.07-0.25 0.45-2.50 3.96 0.40 20.70 5.1 ● ATD 396E080-GS 0.05-0.25 0.07-0.25 0.85-2.50 3.96 0.80 20.70 5.1 ● ATD 400E020-GS 0.05-0.25 0.07-0.25 0.25-2.50 4.00 0.20 20.70 5.1 ● ATD 400E040-GS 0.05-0.25 0.07-0.25 0.45-2.50 4.00 0.40 20.70 5.1 ●
●
●
● ● ● ●
● ● ● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ● ● ●
● ● ● ●
●: Standard stock ○: Made-to-Order
233
Made with FlippingBook - Online Brochure Maker