Turning ISO Turning Inserts
Overview of Turning Insert Geometries
Negative Inserts
Cross section geometry
Application
Chip breaker
Features
Chip breaking range
A B
Steel finishing machining chip breaker Chip breaker structure design to break chips at varied depths of cut, featuring good sharpness and smooth edge inclination design, which can effectively improve the chip flow and reduce cutting force. 1st choice for steel finish to semi- finishing turning Light cutting chip breaker, low cutting force, suitable for slender shaft, thin walled and poorly clamped parts. Overall good cutting performance.
PA1
1#
0.10
PB1
A
0.10
B
G NNSFW
Finishing
4$
SC1
1st choice for heat resistant alloy finish turning Excellent performance at low depth of cut.
A
B
G NNSFW
1st choice for stainless steel finish turning High positive rake angle reduced cutting force and built-up edge, can obtain much better surface quality. Very good chip breaking at low feed and cutting depth.
.#
15°
MB2
A
0.20
B
G NNSFW
#4
BS
Recommended for profile turning Suitable for profiling with changing depth of cut. Smooth chip evacuation
A
Profiling
B
G NNSFW
4-
Recommended for heat resistant alloy light turning. Suitable for heat resistant alloy, Ti- alloy. Sharp and wavy cutting edge can get good surface finish and good chip breaking results.
SL3
A
Light cutting
B
G NNSFW
28
Made with FlippingBook - Online Brochure Maker