Milling Milling Cutters
Spare parts
Cutter diameter (mm)
Screw
Wrench
Torque
∅ 25-50
3.0Nm
SP035086
DT-TP10
Compatible Inserts
● Good Conditions Bad Conditions
General Conditions
Machining conditions
● ● ● ●
●
Dimension (mm)
P
M K S H
Insert shape
Product code
IC S REBSD1AN
XDLT 090408ER-MM3
9.525 4.76 0.8 1.3 3.9 15°
●
●
● ●
●
XDMW 090408ER-HR2
9.506 4.76 0.8 1.6 3.9 15°
○
●
●: Standard stoc k ○ : Made-to-Order
Materials
Cutting depth and feed
XD..0904..
High feed milling
Plunging
Hardness (HB)
Tensile strength (N/mm 2 )
ISO
Material classification
ap
fz
ae
fz
(mm) min max min max min max min max
<600 <950
<180 <280
Unalloyed steel
0.30 1.50
0.05 0.15
700-950 950-1200 1200-1400
200-280 280-355 355-415
Alloyed steel
0.30 1.50
0.05 0.12
Duplex stainless steel Austenitic stainless steel
778 675
230 200 300 220 260 250
0.20 0.80
0.05 0.10
Precipitation-hardening stainless steel
1013
Grey cast iron
700 880 800 260 447 943
Nodular cast iron Malleable cast iron
0.30 1.50
0.05 0.15
0.20 1.20
0.00 7.00
Aluminum
75
− −
− −
Aluminum alloy Fe-based alloy Co-based alloy Ni-based alloy
130 280 320 350 370
1076 1177 1262
0.10 0.50
0.05 0.10
Ti-alloy
Hardened steel Chilled cast iron
- -
50-60HRC
0.30 1.00
0.05 0.10
55HRC *The recommended cutting conditions always refer to general conditions. These cutting conditions should be adjusted according to the practical machine rigidity, tools, workpiece clamping and coolant. Average chip thickness (hm)=fz x sinkr.
359
Made with FlippingBook - Online Brochure Maker