Milling Milling Cutters
Materials
Cutting depth and feed
SD..1204..N..
High feed milling
Plunging
Hardness (HB)
Tensile strength (N/mm 2 )
ISO
Material classification
ap
fz
ap
fz
(mm) min max min max min max min max
<600 <950
<180 <280
Unalloyed steel
1.00 1.80
0.15 0.25
700-950 950-1200 1200-1400
200-280 280-355 355-415
Alloyed steel
1.00 1.20
0.15 0.30
Duplex stainless steel Austenitic stainless steel
778 675
230 200 300 220 260 250
0.05 0.80
0.05 0.15
Precipitation-hardening stainless steel
1013
Grey cast iron
700 880 800 260 447 943
0.20 2.00
0.00 11.40
Nodular cast iron Malleable cast iron
0.80 1.60
0.10 0.30
Aluminum
75
-
-
-
-
Aluminum alloy Fe-based alloy Co-based alloy Ni-based alloy
130 280 320 350 370
1076 1177 1262
0.10 0.80
-
-
Ti-alloy
Hardened steel Chilled cast iron
- -
50-60HRC
-
-
-
-
55HRC *The recommended cutting conditions always refer to general conditions. These cutting conditions should be adjusted according to the practical machine rigidity, tools, workpiece clamping and coolant. Average chip thickness (hm)=fz x sinkr.
370
Made with FlippingBook - Online Brochure Maker