Hole Making Rough/Fine Boring
Operation Manual of DTB
1.Wipe the assembly areas, such as the outer cylindrical part of the anti-vibration holder and the inner hole of the mounting seat, as well as the V-shaped positioning grooves of the damping bar and head.
2.The clamping length of the anti-vibration holder must be more than 4*D. Use clamping methods such as open clamping sleeves, and avoid using unstable locking methods like direct screw compression. When used for a long time, internal cooling must be applied to ensure that the damping device dissipates heat effectively, extending the tool’s life and damping performance.
3.Adjust the center height — during the initial installation, use a center calibration block. Move the tool holder along the machine’s X-axis on the calibration plane, to ensure that the height difference of the reference surface is controlled within 0.01mm.
4.Select the required tool head and compatible insert based on processing needs and complete the installation and calibration of the tool.
529
529
Made with FlippingBook - Online Brochure Maker