Henry Product Guide by Boise Cascade

Henry Products are proudly distributed by Boise Cascade Building Materials Distribution. Call your rep today for more information.

PRODUCT GUIDE

Complete Weatherization

Table Of Contents

Complete Weatherization ___________________________________Page 2 - 9

Total Weather Protection ___________________________________Page 10 - 12

Guide To Codes __________________________________________Page 13 - 17

Weather Resistive Barriers _________________________________Page 18 - 38

Flashings _______________________________________________Page 39 - 63

Sealants ________________________________________________Page 64 - 68

Commercial Air Barrier Systems _____________________________Page 69 - 81

Effective Moisture Management _____________________________Page 82 - 98

Roofing ________________________________________________Page 99 - 106

Total Waterproofing ______________________________________Page 107 - 125

Miscellaneous Products __________________________________Page 126 - 128

Peace of mind

from roof to slab TM

Whatever your application, from light commercial construction to residential and multi-family housing, Henry ® has the right moisture control solution for you.

Complete weatherization

solutions from Henry ®

Since the late 1930s, Henry products and systems have been helping buildings withstand the elements. Architects, builders and contractors have a single, go-to source for weatherization solutions that help manage the flow of water, vapor, air and energy to create more comfortable, energy-efficient interiors. Building confidence for 80+ years

To prevent moisture intrusion and weatherize a building properly, you’ve got to start with the right solutions for every inch of the structure. All Henry Building Envelope Systems ® components are compatible, so you have more flexibility when selecting weather-resistive barriers, flashings and sealants. Available from a single source, Henry weatherization solutions are also the industry’s most comprehensive. Whatever your building materials, codes, construction methods, or climate, Henry has a complete weatherization solution for every level of protection and budget. Henry Building Envelope Systems • Simplify selection and installation • Mitigate moisture intrusion that can cause mold and rot • Eliminate uncontrolled air leakage • Reduce energy consumption Industry leading warranty Henry weatherization solutions are backed by the best warranty in the business. Our warranty provides coverage on BOTH materials and labor, ultimately allowing you to move on to your next job with confidence.

www.henry.com

3 easy steps for complete protection

It’s as simple as 1-2-3 – by keeping water out of the building, the Henry ® 1-2-3 Moisture Control System ™ helps prevent the development of mold, mildew, or rot inside that structure’s walls. The Henry 1-2-3 Moisture Control System’s compatible components make it just as easy to select and install the right solution – simply choose the barrier, flashing and sealant that works best for your project, and start building with confidence. And the Henry 1-2-3 Moisture Control System carries an industry-leading 15-year warranty covering materials PLUS labor!

A one-stop compatible weather-resistive barrier system

Weather-resistive barriers

Self-adhered membrane Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier. It also self-seals around siding nails when penetrated.

Mechanically fastened membranes The WeatherSmart ® product line features a non-woven substrate and a smart polymer coating, making it surfactant- resistant and providing outstanding UV stability.

Building papers Jumbo Tex ® Weather- Resistive Barriers are the industry standard behind stucco and masonry. Hydro Tex ™ Hybrid Weather-Resistive Barrier is the industry’s first labor-saving hybrid barrier.

Flashings

With its Building Envelope Systems, Henry is the only provider of weather barrier solutions that offers compatible flashing membranes in self-adhered, mechanically fastened and liquid-applied options. Between the FortiFlash ® and Moistop ® family of flashing membranes, you’ll have plenty of options to meet your project’s design needs.

Sealants

Moistop ® Sealant and Liquid Flashing Compatible with all Henry weather-resistive barriers and flashings.

www.henry.com

Foundation and below grade Henry provides a wide range of foundation and below grade waterproofing solutions to prevent water infiltration through the residential building envelope. From self-adhered membranes and drainage boards to under and over slab vapor retarders, Henry has the waterproofing options that let you move forward with confidence.

Roofing systems The complete line of Henry roofing underlayments includes waterproofing solutions for use under shingles, tile, metal, shake, slate and other sloped roofing surfaces. All Henry roofing underlayments meet or exceed industry standards and can be installed during all seasons.

Available products

Item

Sizes available

Weather-resistive barriers

Blueskin ® VP100

4", 6", 9", 12" and 48" x 100 lineal feet

WeatherSmart ® Drainable WeatherSmart ® Commercial WeatherSmart ® Housewrap Super Jumbo Tex ® 60 Minute

5', 9' and 10' x 125 lineal feet

5' x 200 lineal feet; 10' x 125 lineal feet

3', 9' and 10' x 100 lineal feet; 4.5' x 200 lineal feet; 9' x 150 lineal feet

40" x 72 lineal feet

Jumbo Tex ®

40" x 97.2 and 150 lineal feet

Two-Ply Super Jumbo Tex ® 60 Minute

40" x 48.6 lineal feet

Two-Ply Jumbo Tex ®

40" x 48.6 and 75 lineal feet

Hydro Tex TM

40" x 48.6 lineal feet

Ply Dry ®

9" and 10' rolls by 100 and 150 lineal feet

1 7 / 8 " and 3" wide x 165 lineal feet

Henry ® Sheathing and Commercial Tape

Flashing

FortiFlash ® 365 FortiFlash ® Butyl

4", 6" 9" and 12" x 75 lineal feet 4", 6", 9", 12" and 18" x 75 lineal feet 4", 6", 9", 12", 18" and 36" x 75 lineal feet

FortiFlash ® 25 and 40 mil

Moistop ® E-Z Seal FortiFlex ® Butyl

4", 6", 9" and 12" x 75 lineal feet

6" and 9" x 50 lineal feet

Moistop ® neXT

6", 9" and 12" x 200 lineal feet 6", 9", 12" and 18" x 300 lineal feet

Moistop ® PF

Moistop ® Corner Shield

Flexible or rigid

Sealant, liquid flashing and primer

Moistop ® Sealant and Liquid Flashing

10 oz and 20 oz sausage

Air-Bloc LF ®

20 oz sausage 15 oz spray can

Blueskin ® Spray Prep

Henry ® 212 All Purpose Crystal Clear Sealant*

10.1 oz tube

Aquatac ® Primer

1 gallon; 5 gallon

Roofing

Blueskin ® PE200HT High Temperature Roof Underlayment

36" x 65 lineal feet 36" x 65 lineal feet 36" x 65 lineal feet

Blueskin ® RF200 Ice and Water Barrier

Eaveguard ® Self-Adhered Shingle Underlayment

Below grade and slab

Blueskin ® WP200 Sheet Waterproofing Henry ® DB200 Drainage Composite

36" x 66.7 lineal feet 48" x 50 lineal feet 144" x 163 lineal feet 168" x 210 lineal feet 4" x 180 lineal feet

Moistop ® Ultra 15 Moistop ® Ultra 10

Moistop ® Tape

* Can only be used with Blueskin VP100 and FortiFlash Butyl in a reverse lap application.

www.henry.com

One-stop compatibility and simplicity The Henry 1-2-3 Moisture Control System makes it easy to select the right moisture control components and build with confidence.

Ask us today about other Henry ® solutions that help manage the flow of water, air, vapor and energy.

Building Envelope Systems ® Wall & Window | Roof | Foundation

1-800-773-4777 www.henry.com

Total weather protection

Prevent leaks, mold and costly call-backs in 3 easy steps.

Building Confidence ®

Customize your system using each step below:

Residential and light commercial weatherproofing: The industry’s most complete system and warranty. The Henry ® 1-2-3 Moisture Control System ™ Warranty

Weather resistive barriers First, choose a weather-resistive barrier that fits your needs from our extensive line. •Blueskin ® VP100

• WeatherSmart ® Drainable • WeatherSmart ® Commercial • WeatherSmart ®

• Weathersmart ® Rainscreen • Super Jumbo Tex ® 60 Minute • Jumbo Tex ® • 2 Ply Super Jumbo Tex ® 60 Minute • 2 Ply Jumbo Tex ® • Hydro Tex TM Flashing Next, select the flashing(s) that works for your application. We have mechanically attached and self-adhesive products to choose from: • FortiFlash ® Butyl (20 & 30 mil) • FortiFlash ® (25 & 40 mil) •Moistop ® E-Z Seal

When you use the Henry 1-2-3 Moisture Control System you get products proven to be among the best on the market. And with this system, you get the added protection of the Henry 1-2-3 Moisture Control System Warranty, offering 15 years of coverage backed by a company that’s been in business for over 80 years.

In the unlikely event of a leak caused by product failure, the repairs are covered for both materials AND labor with a single point of contact. No complicated claim process. No digging through files to find

• FortiFlex ® Butyl •Moistop ® neXT •Moistop ® PF •Moistop ® Corner Shield •Air-Bloc ® LF

Sealant Lastly, use Moistop ® Sealant to provide long lasting protection against moisture intrusion.

your original purchase receipt. No reduction in reimbursement value based on how long the product has been installed. The protection provided by this warranty is unsurpassed on the market.

Note: Use Henry 212 Crystal Clear Sealant to seal reverse laps in Blueskin VP100.

Henry ® 1-2-3 Moisture Control System ™ warranty

Best in class coverage

Other warranties

15-year coverage

Covers material AND labor for any repairs

Value is not pro-rated

Is transferable to any owner even if no original purchase receipt

* Comparison includes a variety of competitors. Not all competitors are “no” for all categories, but all are “no” for some categories. See www.henry.com for product data sheets, installation guides and complete warranty details.

Ask us today about other Henry ® solutions that help manage the flow of water, air, vapor and energy.

Building Envelope Systems ® Wall & Window | Roof | Foundation

csfhenry@henry.com | 1-800-773-4777 henry.com

Before you read...

A Quick Guide to Codes For code officials and people like specifiers, the language of codes is familiar and comfortable. For the rest of us, it can seem a bit overwhelming, so we put together an overview of some of the basic codes and test requirements

you might encounter regarding the weatherization of residential and light commercial structures.

Where do codes come from? Multiple organizations have a say in building codes. The International Code Council (ICC) creates both the International Building Code (IBC) and the International Residential Code (IRC). The IRC refers to requirements for detached one- and two-family dwellings and townhouses not more than three stories above grade, while the IBC applies to structures not covered by the IRC. States and local authorities may adopt these codes as created or add their own specific requirements to them. The IBC and IRC are updated every three years; however, the active code in many states is several years behind the most recent issue. The IBC and the IRC dictate what materials meet the requirements for weatherization purposes. In some cases, the building codes identify a single material as allowed but may provide for approved alternate materials as well. The ICC creates Acceptance Criteria that define the testing methods and performance requirements for approval of alternate material under the building code. Acceptance criteria of note for weatherization materials include:

•ICC AC-38 for Water-Resistive Barriers •ICC AC-148 for Flashing Materials •ICC AC-356 Drainage Systems for Plaster or Masonry Veneer

Other trade and standards organizations also have a direct influence on the weatherization materials allowed by the building codes. ASTM International (American Society for Testing and Materials) and the American Architectural Manufacturers Association (AAMA), for example, provide standards and material specifications referenced in the building code for allowed products. 2018 IBC Chapter 14 Exterior Walls 1402.2 Weather protection. Exterior walls shall provide the building with a weather-resistant exterior wall envelope. The exterior wall envelope shall include flashing, as described in Section 1404.4. The exterior wall envelope shall be designed and constructed in such a manner as to prevent the accumulation of water within the wall assembly by providing a water-resistive barrier behind the exterior veneer, as described in Section 1403.2, and a means for draining water that enters the assembly to the exterior. Protection against condensation in the exterior wall assembly shall be provided in accordance with Section 1404.3.

1403.5 Vertical and lateral flame propagation. Exterior walls on buildings of Type I, II, III or IV construction that are greater than 40 feet (12 192mm) in height above grade plane and contain a combustible water-resistive barrier shall be tested in accordance with and comply with the acceptance criteria of NFPA 285. For the purposes of this section, fenestration products, flashing of fenestration products and weather-resistive barrier flashing and accessories at other locations, including through wall flashing, shall not be considered part of the water-resistive barrier. Exceptions: 1. Walls in which the water-resistive barrier is the only combustible component and the exterior wall has a wall covering of brick, concrete, stone, terra cotta, stucco or steel with minimum thicknesses in accordance with Table 1404.2. 2. Walls in which the water-resistive barrier is the only combustible component and the water-resistive barrier has a peak heat release rate of less than 150 kW/m2, a total heat release of less than 20 MJ/m2 and an effective heat of combustion of less than 18 MJ/kg as determined in accordance with ASTM E 1354 and has a flame spread index of 25 or less and a smoke-developed index of 450 or less as determined in accordance with ASTM E 84 or UL 723. The ASTM E 1354 test shall be conducted on specimens at the thickness intended for use, in the horizontal orientation and at an incident radiant heat flux of 50 kW/m2. 1403.2 Water-resistive barrier. Not fewer than one layer of No. 15 asphalt felt, complying with ASTM D226 for Type I felt or other approved materials, shall be attached to the studs or sheathing, with flashing as described in Section 1404.4, in such a manner as to provide a continuous water-resistive barrier behind the exterior wall veneer. 1404.4 Flashing. Flashing shall be installed in such a manner so as to prevent moisture from entering the wall or to redirect that moisture to the exterior. Flashing shall be installed at the perimeters of exterior door and window assemblies, penetrations and terminations of exterior wall assemblies, exterior wall intersections with roofs, chimneys, porches.

Chapter 25 Gypsum Board, Gypsum Panel Products, and Plaster

For Cement Plaster/Stucco:

2510.6 Water-resistive barriers. Water-resistive barriers shall be installed as required in Section 1403.2 and, where applied over wood-based sheathing, shall include a water-resistive vapor- permeable barrier with a performance at least equivalent to two layers of water-resistive barrier complying with ASTM E2556, Type I. The individual layers shall be installed independently such

that each layer provides a separate continuous plane and any flashing (installed in accordance with Section 1404.4) intended to drain to the water-resistive barrier is directed between the layers. Exceptions: 1. Where the water-resistive barrier that is applied over wood-based sheathing has a water resistance equal to or greater than that of a water-resistive barrier complying with ASTM E2556, Type II and is separated from the stucco by an intervening, substantially non-water- absorbing layer or drainage space. 2. Where the water-resistive barrier is applied over wood-based sheathing in Climate Zone 1A, 2A, or 3A, a ventilated air space shall be provided between the stucco and the water- resistive barrier.

The 2018 IRC: Chapter 7 Wall Covering

R703.1 General. Exterior walls shall provide the building with a weather-resistant exterior wall envelope. The exterior wall envelope shall include flashing as described in Section R703.4.

R703.1.1 Water resistance. The exterior wall envelope shall be designed and constructed in a manner that prevents the accumulation of water within the wall assembly by providing a water- resistant barrier behind the exterior veneer as required by Section R703.2 and a means of draining to the exterior water that enters the assembly.

Importance of Moisture Management

R703.2 Water-resistive barrier. One layer of No. 15 asphalt felt, free from holes and breaks, complying with ASTM D226 for Type I felt or other approved water-resistive barrier shall be applied over studs or sheathing of all exterior walls. Such felt or material shall be applied horizontally, with the upper layer lapped over the lower layer not less than 2 inches (51mm). Where joints occur, felt shall be lapped not less than 6 inches (152mm). The felt or other approved material shall be continuous to the top of walls and terminated at penetrations and building appendages in a manner to meet the requirements of the exterior wall envelope as described in Section R703.1.

R703.4 Flashing. Approved corrosion-resistant flashing shall be applied shingle-fashion in a man - ner to prevent entry of water into the wall cavity or penetration of water to the building structural framing components. Self-adhered membranes used as flashing shall comply with AAMA (Ameri - can Architectural Manufacturers Association) 711. Fluid-applied membranes used as flashing in exterior walls shall comply with AAMA 714. The flashing shall extend to the surface of the exterior wall finish. Approved corrosion-resistant flashings shall be installed at: 1. Exterior window and door openings. Flashing at exterior window and door openings shall extend to the surface of the exterior wall finish or to the water-resistive barrier complying with Section R703.2 for subsequent drainage. Mechanically attached flexible flashings shall comply with AAMA 712. R703.7.3 Water-resistive barriers. Water-resistive barriers shall be installed as required in Section R703.2 and, where applied over wood-based sheathing, shall include a water-resistive vapor- permeable barrier with a performance at least equivalent to two layers of Grade D paper. The individual layers shall be installed independently such that each layer provides a separate continuous plane and any flashing (installed in accordance with Section R703.4) intended to drain to the water-resistive barrier is directed between the layers. • Exception: Where the water-resistive barrier that is applied over wood-based sheathing has a water resistance equal to or greater than that of 60-minute Grade D paper and is separated from the stucco by an intervening, substantially non-water-absorbing layer or designed drainage space. Additional energy code requirements may dictate the exterior envelope includes an air barrier. These requirements will vary based on jurisdiction, including different requirements from county to county, so check with the local building department. These are the primary weatherization codes you’ll encounter in residential and light commercial construction. Beyond them, you may encounter reference to test methods for specific performance criteria or physical properties of materials. Typically, these tests will validate compliance with some aspect of the code and are not separate or additional to the code. So, while you may not be a code geek, we hope you feel a little more confident in your understanding of weatherization building codes. Remember, understanding codes, guidelines, and best practices is all part of ensuring that you can build at the highest quality and avoid issues.

WEATHER RESISTIVE BARRIERS

A step 1 component of the Henry ® 1-2-3 Moisture Control System ™

Picks up where traditional house wraps leave off Blueskin ® VP100 delivers next-generation air and water barrier protection for wood-framed residential and multi-family construction. Engineered to eliminate water and moisture intrusion while allowing walls to breathe, Blueskin VP100 is a self-adhered, vapor permeable, water-resistive air barrier membrane. Combining an engineered film and a patented, permeable adhesive technology with split-back poly-release film, Blueskin VP100 protects buildings, budgets and peace of mind. Blueskin VP100 is designed to withstand the rigors of the jobsite and the elements. When used as part of the Henry ® 1-2-3 Moisture Control System ™ it is backed by an industry-leading 15-year material PLUS labor warranty. Henry ® Blueskin ® VP100 Self-Adhered Water-Resistive Barrier

Features and benefits

Self-seals around nails and fasteners for lasting watertightness

95 %

More than 95% drainage efficiency

Can contribute up to 50% energy savings*

Self-adheres directly to your structure’s exterior, eliminating air gaps that can lead to increased heating and cooling costs

Exceeds even the strictest building codes, providing long-lasting performance

* Based on Hot2000 Simulation, Denver, CO; for a two-story, 2,000 sq. ft. home. Based on energy modeling.

Building Confidence ™

Blueskin ® VP100

Performance standards you can trust Henry Blueskin VP100 is a residential and multi-family self-adhered vapor permeable, water-resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin VP100 is fully adhered to the wall substrate in a ‘weatherboard’ method without mechanical attachment.

Limitations: Membrane must be rolled after application to ensure adhesion to substrate and laps. Not designed for permanent exposure, protect installed membrane as soon as possible. Maximum exposure not to exceed 150 days. Excessive moisture in substrate or laps can inhibit adhesion or result in loss of adhesion prior to installation of cladding. Do not expose the backside of the substrate to moisture or rain. Protect exposed back-up walls against wet weather conditions during and after application of membrane, including wall openings and construction activity above completed air barrier installation. Where adhesion of Blueskin VP100 is not adequate, use Henry Aquatac Primer to provide additional adhesion. For installations between 20 °F (-4 °C) and 40 °F (5 °C), Henry Aquatac Primer is always required for all substrates. For more information, please review the Henry Blueskin VP Cold Weather Application Tech-Talk which is available on the Henry website or contact your local Henry representative. Installation: Refer to Blueskin VP100 Installation Guidelines for detailed application information available at henry.com website. Blueskin VP100 must be installed in a consecutive weatherboard method starting at bottom or base of wall and working up; providing minimum of 2-in (5cm) side laps and 3-in (7.6cm) end laps. Cut to manageable lengths, position membrane for alignment, remove protective poly-film using split release and firmly apply pressure to ensure adhesion. Eliminate all fishmouths, wrinkles or gaps, roll entire membrane surface (including seams) with a counter top or “J-roller” with adequate pressure to ensure full contact and adhesion. Seal membrane terminations, heads of mechanical fasteners, masonry tie fasteners, around penetrations. Varied installation methods such as vertical application of Blueskin VP100 and “Method B” flashing installation for integral flanged windows are acceptable as long as the appropriate lap dimensions are maintained and the laps are installed in a sequential overlapping weatherboard method where applicable. Refer to Blueskin VP100 Installation Guidelines for detailed instructions. Availability: Henry products are distributed nationwide. For product information and pricing, please call a Henry distributor near you. If you need assistance locating a participating distributor, please call our Customer Service Department at 1-800-773-4777. Henry Product Warranty Information: This product may be eligible for the 15 year Henry 1-2-3 Moisture Control System Warranty when used in conjunction with other products. See https://us.henry.com/warranty for details. We, the manufacturer, warrant only that this product is free of defects, since many factors which affect the results obtained from this product – such as weather, workmanship, equipment utilized, and prior condition of the substrate – are all beyond our control. We will replace at no charge any product proved to have a material defect within 12-months of purchase, provided it has been applied in accordance with our written directions for uses we recommend as suitable for this product. Proof of purchase must be provided. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO ONE, INCLUDING THE MANUFACTURER, SHALL HAVE ANY LIABILITY OF ANY KIND BEYOND PRODUCT REPLACEMENT, INCLUDING FOR NEGLIGENCE OR FOR DIRECT, CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES, RESULTING FROM ANY MISUSE, DEFECTS OR DELAYS CAUSED BY REPLACEMENT OR OTHERWISE. IF PURCHASER DOES NOT ACCEPT THESE TERMS, PURCHASER MAY RETURN WITHIN 30-DAYS OF PURCHASE ALL UNOPENED CONTAINERS OR PACKAGES OF PRODUCT PURCHASED FOR A FULL REFUND. RETENTION OF PRODUCT BEYOND 30-DAYS, OR USE OF PRODUCT SHALL CONSTITUTE ACCEPTANCE OF THESE TERMS, CONDITIONS, AND DISCLAIMERS. THIS LIMITED WARRANTY AND LIABILITY DISCLAIMER PROVIDES THE PURCHASER’S EXCLUSIVE REMEDY FOR ANYTHING RELATING TO THE PRODUCT. To the extent that any part of this LIMITED PRODUCT WARRANTY AND LIABILITY DISCLAIMER is determined unenforceable under the law of the place of purchase of the product, that part is severed and the remainder of these terms remain in full force and effect. To the extent permitted by law, the duration of any implied warranties is limited to the duration of Henry’s express warranty. This warranty language supersedes any language found elsewhere, including product labels, sell sheets and/or technical documents.

Physical/performance property

Typical value Test method

Moisture vapor permeance

33 perms (WVT)

ASTM E96 Procedure A

Drainage efficiency >95%

ASTM E2273

Pass

Air permeance

< 0.02 l/m² @ 75Pa ASTM E2178

Average dry breaking force

MD - 55 lb/245N CD - 48 lb/214N

ASTM D5034

Accelerated aging

Pass 25 cycles

ICC-ES AC48

Cycling and elongation

ICC-ES AC48

Pass 100 cycles at -20 °F (-29 °C)

Application temperature, min Service temperature range

20 °F (-7 °C)

- -

-40 °F to 180 °F (-40 °C to 82 °C )

Flame spread index

5, Class A

ASTM E84

Water penetration resistance around nails

Pass

AAMA 711 ASTM D1970 mod

*Blueskin VP100 is tested in accordance with ASTM procedures. The values shown are typical values obtained in these tests.

Product characteristics

An engineered film and a patented,permeable adhesive technology with split-back poly-release film

Composition

4", 6", 9", 12", and 48" x 100'

Roll size

Product approvals, certifications and specifications Complies with the International Code Council Evaluation Services Acceptance Criteria for Water Resistive Barriers (AC 38) Complies as an alternative to the water-resistive barrier specified in Section 1404.2 of the 2012 and 2015 International Building Code ® and Section 1403.2 of the 2018 International Building Code ® Complies as a water-resistive barrier specified in Section 2510.6 of the International Building Code ® Complies as an alternative to the water-resistive barrier specified in Section R703.2 of the International Residential Code ® Complies as water-resistive barrier specified in Section R703.6.3 of the 2012 International Residential Code ® and Section R703.7.3 of the 2015 and 2018 International Residential Code ® ICC Evaluation Service Report 2975 ASTM E 84 – Standard Test Method for Surface Burning Characteristics of Building Materials ASTM E96 – Water Vapor Transmission of Materials ASTM D5034 – Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM E 2178 – Standard Test Method for Air Permeance of Building Materials ASTM E2273 – Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies

Featuring a range of compatible weather barriers, flashings and sealants, the Henry ® 1-2-3 Moisture Control System ™ makes it easier than ever to build with confidence. Henry and Blueskin are registered trademarks of the Henry Company

Ask us today about other Henry ® solutions that help manage the flow of water, air, vapor and energy.

Building Envelope Systems ® Wall & Window | Roof | Foundation

csfhenry@henry.com | 1-800-773-4777 henry.com

A step 1 component of the Henry ® 1-2-3 Moisture Control System ™

Henry ® WeatherSmart ® Housewrap

Proven protection against water, air and moisture Henry ® WeatherSmart ® Housewrap provides a weather-resistive barrier that protects against water and air intrusion from the outside, while allowing moisture to escape from the inside. Featuring an advanced polymer technology, WeatherSmart Housewrap is suitable for use in any climate and behind most exterior claddings, including fiber cement, brick, vinyl and wood siding. WeatherSmart Housewrap is designed to withstand the rigors of the jobsite and the elements. When used as part of the Henry ® 1-2-3 Moisture Control System ™ it is backed by an industry-leading 15-year material PLUS labor warranty for product defects.

Features and benefits

Excellent balance between water resistance and permeability

Outstanding UV and surfactant resistance

Exceptional tear resistance and extended exposure time for all-season performance

Exceeds air barrier code requirements

Part of approved NFPA 285 assemblies*

Building Confidence ™

* See website for a complete report on approved NFPA 285 assemblies.

WeatherSmart ® Housewrap

Performance standards you can trust Henry WeatherSmart Housewrap is tested in accordance with ASTM procedures. It is a scientifically advanced housewrap designed to provide excellent protection from wall damage due to water intrusion and condensation with a variety of exterior wall assemblies.

Limitations: Product should be covered within six months. To ensure maximum exposure time, store unused product in an area not exposed to sunlight. Inspect product to insure it is free of any protrusions or damage which may detract from the weather-resistive barrier integrity. Holes, tears or punctures should be sealed with Moistop ® Sealant or Henry Sheathing Tape. This product is not recommended for horizontal, roofing or below grade applications. Ensure that a layer of Super Jumbo Tex ® 60 Minute is used to separate WeatherSmart and stucco or mortar used in masonry veneer walls. Installation: WeatherSmart should be installed in accordance with the local applicable building code. WeatherSmart Housewrap should be applied horizontally, with the upper layers overlapping the lower layer by a minimum of 6", and all vertical joints should be lapped a minimum of 6". It is recommended to tape all vertical seams with Henry Sheathing Tape; all vertical and horizontal seams should be taped to achieve an air barrier install; consult your design professional where necessary. Availability: Henry products are distributed nationwide. For product information and pricing, please call a Henry distributor near you. If you need assistance locating a participating distributor, please call our Customer Service Department at 1-800-773-4777. Henry Product Warranty Information: This product may be eligible for the 15 year Henry 1-2-3 Moisture Control System Warranty when used in conjunction with other products. See https://us.henry.com/warranty for details. We, the manufacturer, warrant only that this product is free of defects, since many factors which affect the results obtained from this product – such as weather, workmanship, equipment utilized, and prior condition of the substrate – are all beyond our control. We will replace at no charge any product proved to have a material defect within 12-months of purchase, provided it has been applied in accordance with our written directions for uses we recommend as suitable for this product. Proof of purchase must be provided. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO ONE, INCLUDING THE MANUFACTURER, SHALL HAVE ANY LIABILITY OF ANY KIND BEYOND PRODUCT REPLACEMENT, INCLUDING FOR NEGLIGENCE OR FOR DIRECT, CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES, RESULTING FROM ANY MISUSE, DEFECTS OR DELAYS CAUSED BY REPLACEMENT OR OTHERWISE. IF PURCHASER DOES NOT ACCEPT THESE TERMS, PURCHASER MAY RETURN WITHIN 30-DAYS OF PURCHASE ALL UNOPENED CONTAINERS OR PACKAGES OF PRODUCT PURCHASED FOR A FULL REFUND. RETENTION OF PRODUCT BEYOND 30-DAYS, OR USE OF PRODUCT SHALL CONSTITUTE ACCEPTANCE OF THESE TERMS, CONDITIONS, AND DISCLAIMERS. THIS LIMITED WARRANTY AND LIABILITY DISCLAIMER PROVIDES THE PURCHASER’S EXCLUSIVE REMEDY FOR ANYTHING RELATING TO THE PRODUCT. To the extent that any part of this LIMITED PRODUCT WARRANTY AND LIABILITY DISCLAIMER is determined unenforceable under the law of the place of purchase of the product, that part is severed and the remainder of these terms remain in full force and effect. To the extent permitted by law, the duration of any implied warranties is limited to the duration of Henry’s express warranty. This warranty language supersedes any language found elsewhere, including product labels, sell sheets and/or technical documents.

Physical/performance property

Typical value Test method

Moisture vapor transmission

56 g/sm/day (8 perms)

ASTM E96 Procedure A (Desiccant Method)

Dry breaking force Air permeance at 75 pascals Flame spread Smoke developed Water resistance “Boat test” Hydrostatic head

0.0025 L/s/sqM ASTM E2178

MD - 55 lb f CD - 40 lb f

ASTM D5034 (Grab Test) ASTM D779 AATCC 127

Pass Pass (60 min rating)

Class A Pass Pass

ASTM E84 ASTM E84

—

Maximum Service Temperature

200 °F

*WeatherSmart is tested in accordance with ASTM procedures. The values shown are typical values obtained in these tests.

Product characteristics

Composition

Nonwoven, non-perforated wrap, employing an advanced breathable polymer technology.

Roll size

3' x 100' 3' x 165' 4.5' x 200' 9' x 100'

9' x 150' 10' x 150' 10' x 100'

Thickness

13 mils 1.9lbs/100 sq. ft

Weight

Product approvals, certifications and specifications

Exceeds ASTM E2556 Type II performance requirements Complies with the International Code Council Evaluation Services Acceptance Criteria for Water Resistive Barriers (AC 38) Complies as an alternative to the water-resistive barrier specified in Section 1404.2 of the International Building Code ® Complies as an alternative to the weather-resistant sheathing papers specified in Section R703.2 of the International Residential Building Code ® ICC-ES Evaluation Report No. 1027 AATCC-127 (American Association of Textile Chemists and Colorists) Method 127 Water Resistance: Hydrostatic Pressure Test ASTM D779 - Standard Test Method for Water Resistance of Paper, Paper- board, and Other Sheet Materials by the Dry Indicator Method ASTM D5034 - Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials ASTM E96 - Standard Test Method for Water Vapor Transmission of Materials ASTM E2178 - Standard Test Method for Air Permeance of Building Materials

Featuring a range of compatible weather barriers, flashings and sealants, the Henry ® 1-2-3 Moisture Control System ™ makes it easier than ever to build with confidence. Henry, WeatherSmart and Super Jumbo Tex are registered trademarks of the Henry Company

Ask us today about other Henry ® solutions that help manage the flow of water, air, vapor and energy.

Building Envelope Systems ® Wall & Window | Roof | Foundation

csfhenry@henry.com | 1-800-773-4777 henry.com

A step 1 component of the Henry ® 1-2-3 Moisture Control System ™

Water

Henry ® WeatherSmart ® D Drainable Wrap

WeatherSmart D

Confidently move water down the wall

Features and benefits

95 %

More than 95% drainage efficiency

Henry ® now offers a second option for a drainable WRB. WeatherSmart ® D Drainable Wrap performs at the highest drainage efficiency level, making it suitable for use in any climate. The high performance fabric is tough on the job site and effective behind most exterior claddings, including fiber cement, brick, vinyl and wood siding. Part of the Henry ® 1-2-3 moisture control system, WeatherSmart D Drainable Wrap is designed to withstand the rigors of the jobsite and the elements. When used as part of the Henry ® 1-2-3 Moisture Control System ™ it is backed by an industry-leading 15-year material PLUS labor warranty for product defects.

Excellent balance between water resistance and permeability

Textured surface moves water down the wall

Use interchangeably with WeatherSmart Drainable

Exceptional tear resistance and extended exposure for all-season performance

Building Confidence ™

WeatherSmart ® D

Performance standards you can trust WeatherSmart D is tested in accordance with ASTM procedures. It is a scientifically advanced housewrap designed for use within a variety of exterior wall assemblies. It provides excellent protection from wall damage due to water intrusion and condensation.

Limitations: Product should be covered within six months. To ensure maximum exposure time, store unused product in an area not exposed to sunlight. Inspect product to insure it is free of any protrusions or damage which may detract from the weather-resistive barrier integrity. Holes, tears or punctures should be sealed with Moistop ® Sealant or Henry Sheathing Tape. This product is not recommended for horizontal, roofing or below grade applications. Ensure that a layer of Super Jumbo Tex ® 60 minute is used to separate WeatherSmart D and Portland cement stucco or mortar used in masonry veneer walls. Installation: WeatherSmart D should be installed in accordance with the local applicable building code. WeatherSmart D should be applied horizontally, with the upper layers overlapping the lower layer by a minimum of 6", and all vertical joints should be lapped a minimum of 12". It is recommended to tape all vertical seams with Henry Sheathing Tape; all vertical and horizontal seams should be taped to achieve an air barrier install; consult your design professional where necessary. Availability: Henry products are distributed nationwide. For product information and pricing, please call a Henry distributor near you. If you need assistance locating a participating distributor, please call our Customer Service Department at 1-800-773-4777. Henry Product Warranty Information: This product may be eligible for the 15-year Henry 1-2-3 Moisture Control System Warranty when used in conjunction with other products. See https://us.henry.com/warranty for details. We, the manufacturer, warrant only that this product is free of defects, since many factors which affect the results obtained from this product – such as weather, workmanship, equipment utilized, and prior condition of the substrate – are all beyond our control. We will replace at no charge any product proved to have a material defect within 12-months of purchase, provided it has been applied in accordance with our written directions for uses we recommend as suitable for this product. Proof of purchase must be provided. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO ONE, INCLUDING THE MANUFACTURER, SHALL HAVE ANY LIABILITY OF ANY KIND BEYOND PRODUCT REPLACEMENT, INCLUDING FOR NEGLIGENCE OR FOR DIRECT, CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES, RESULTING FROM ANY MISUSE, DEFECTS OR DELAYS CAUSED BY REPLACEMENT OR OTHERWISE. IF PURCHASER DOES NOT ACCEPT THESE TERMS, PURCHASER MAY RETURN WITHIN 30-DAYS OF PURCHASE ALL UNOPENED CONTAINERS OR PACKAGES OF PRODUCT PURCHASED FOR A FULL REFUND. RETENTION OF PRODUCT BEYOND 30-DAYS, OR USE OF PRODUCT SHALL CONSTITUTE ACCEPTANCE OF THESE TERMS, CONDITIONS, AND DISCLAIMERS. THIS LIMITED WARRANTY AND LIABILITY DISCLAIMER PROVIDES THE PURCHASER’S EXCLUSIVE REMEDY FOR ANYTHING RELATING TO THE PRODUCT. To the extent that any part of this LIMITED PRODUCT WARRANTY AND LIABILITY DISCLAIMER is determined unenforceable under the law of the place of purchase of the product, that part is severed and the remainder of these terms remain in full force and effect. To the extent permitted by law, the duration of any implied warranties is limited to the duration of Henry’s express warranty. This warranty language supersedes any language found elsewhere, including product labels, sell sheets and/or technical documents.

Physical/ performance property Dry breaking force

Test method

WeatherSmart D

WeatherSmart Drainable (for reference)

ASTM D5034 (Grab Test)

MD - 60 lbs. CD - 45 lbs.

MD - 51 lbs. CD - 40 lbs.

Moisture vapor transmission

ASTM E 96, Procedure A

163.7 g/sm/day 23.5 Perms

105 g/sm/day 15 Perms

Water resistance

ASTM D779

>60 mins

Flame spread Smoke developed

ASTM E84

Class A

Drainage efficiency

ASTM E2273

>95%

Air permeance at 75 pascals

ASTM E2178 <0.02 L/s/sqM <0.02 L/s/sqM

WeatherSmart D is tested in accordance with ASTM procedures. The values shown are typical values obtained in these tests.

Product characteristics

Composition

Spunbond polypropylene fabric laminated onto a permeable polypropylene film.

Roll size

5', 9' or 10' x 125'

Weight

1.84 lbs/100 sq. ft.

Product approvals, certifications and specifications

Complies with the International Code Council Evaluation Services Acceptance Criteria for Water Resistive Barriers (AC 38) Complies as an alternative to the water-resistive barrier specified in Section 1404.2 of the International Building Code ® Complies as an alternative to the weather-resistant sheathing papers specified in Section R703.2 of the International Residential Building Code ® Intertek Code Compliance Research Report CCRR-0442 ASTM D779 - Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method ASTM D5034 - Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials ASTM E96 - Standard Test Method for Water Vapor Transmission of Materials ASTM E2178 - Standard Test Method for Air Permeance of Building Materials ASTM E2273 - Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies Exceeds ASTM E2556 Type II performance requirements

Featuring a range of compatible weather barriers, flashings and sealants, the Henry ® 1-2-3 Moisture Control System ™ by Henry ® makes it easier than ever to build with confidence. Henry, WeatherSmart, Moistop and Super Jumbo Tex are registered trademarks of the Henry Company

Ask us today about other Henry ® solutions that help manage the flow of water, air, vapor and energy.

Building Envelope Systems ® Wall & Window | Roof | Foundation

csfhenry@henry.com | 1-800-773-4777 henry.com

A step 1 component of the Henry ® 1-2-3 Moisture Control System ™

Henry ® WeatherSmart ® Commercial

Commercial-grade building wrap: protection against water, air and moisture Building on the proven weatherization protection of Henry ® WeatherSmart ® products, Henry WeatherSmart Commercial is a commercial-grade weather-resistive barrier that delivers exceptional water resistance and up to three times the tear resistance of competitive wraps. Combining a non-woven, non-perforated design with an advanced polymer technology, WeatherSmart Commercial is suitable for use in any climate and behind most exterior claddings, including fiber cement, brick, vinyl and wood siding. WeatherSmart Commercial is designed to withstand the rigors of the jobsite and the elements and is backed by an industry-leading 15-year warranty that covers defective product and provides materials PLUS labor for warranted repairs when used as part of the the Henry ® 1-2-3 Moisture Control System ™ by Henry.

Features and benefits

Excellent balance between water resistance and permeability

Outstanding surfactant resistance and 12 month UV stability

Best in class tear resistance

Exceeds air barrier code requirements

Part of approved NFPA 285 assemblies*

Building Confidence ™

* See website for a complete report on approved NFPA 285 assemblies.

WeatherSmart ® Commercial

Performance standards you can trust WeatherSmart Commercial is an advanced commercial-grade weather barrier designed to provide outstanding protection from wall damage due to water intrusion and condensation with a variety of exterior wall assemblies.

Limitations: Product should be covered within 12 months. To ensure maximum exposure time, store unused product in an area not exposed to sunlight. Inspect product to insure it is free of any protrusions or damage which may detract from the weather-resistive barrier integrity. Holes, tears or punctures should be sealed with Moistop ® Sealant or Henry Sheathing Tape. This product is not recommended for horizontal, roofing or below grade applications. To ensure the integrity of the weather- resistive barrier, Henry strongly recommends the use of two layers of a weather- resistive barrier with a three-coat stucco system. It is recommended that a layer of Super Jumbo Tex ® 60 Minute is used to separate WeatherSmart Commercial and Portland cement stucco or mortar used in masonry veneer walls. Installation: WeatherSmart Commercial should be installed in accordance with the local applicable building code. Weather-resistive barriers should be applied horizontally, with the upper layers overlapping the lower layer by a minimum of 6", and all vertical joints should be lapped a minimum of 6". It is recommended to tape all vertical seams with 3" wide Henry Sheathing Tape; all vertical and horizontal seams must be taped to achieve an air barrier install; consult your design professional where necessary. Availability: Henry products are distributed nationwide. For product information and pricing, please call a Henry distributor near you. If you need assistance locating a participating distributor, please call our Customer Service Department at 1-800-773-4777. Henry Product Warranty Information: This product may be eligible for the 15-year Henry 1-2-3 Moisture Control System Warranty when used in conjunction with other products. See https://us.henry.com/warranty for details. We, the manufacturer, warrant only that this product is free of defects, since many factors which affect the results obtained from this product – such as weather, workmanship, equipment utilized, and prior condition of the substrate – are all beyond our control. We will replace at no charge any product proved to have a material defect within 12-months of purchase, provided it has been applied in accordance with our written directions for uses we recommend as suitable for this product. Proof of purchase must be provided. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO ONE, INCLUDING THE MANUFACTURER, SHALL HAVE ANY LIABILITY OF ANY KIND BEYOND PRODUCT REPLACEMENT, INCLUDING FOR NEGLIGENCE OR FOR DIRECT, CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES, RESULTING FROM ANY MISUSE, DEFECTS OR DELAYS CAUSED BY REPLACEMENT OR OTHERWISE. IF PURCHASER DOES NOT ACCEPT THESE TERMS, PURCHASER MAY RETURN WITHIN 30-DAYS OF PURCHASE ALL UNOPENED CONTAINERS OR PACKAGES OF PRODUCT PURCHASED FOR A FULL REFUND. RETENTION OF PRODUCT BEYOND 30-DAYS, OR USE OF PRODUCT SHALL CONSTITUTE ACCEPTANCE OF THESE TERMS, CONDITIONS, AND DISCLAIMERS. THIS LIMITED WARRANTY AND LIABILITY DISCLAIMER PROVIDES THE PURCHASER’S EXCLUSIVE REMEDY FOR ANYTHING RELATING TO THE PRODUCT. To the extent that any part of this LIMITED PRODUCT WARRANTY AND LIABILITY DISCLAIMER is determined unenforceable under the law of the place of purchase of the product, that part is severed and the remainder of these terms remain in full force and effect. To the extent permitted by law, the duration of any implied warranties is limited to the duration of Henry’s express warranty. This warranty language supersedes any language found elsewhere, including product labels, sell sheets and/or technical documents.

Physical/performance property

Typical value

Test method

Moisture vapor transmission

98 g/sm/day (14 perms)

ASTM E96 Procedure A (Desiccant Method)

Air permeance at 75 pascals Dry breaking force

0.003 L/s/sqM

ASTM E2178

MD - 33 lb f CD - 34 lb f MD - 78 lb f CD - 74 lb f

ASTM D4533 ASTM D5034 (Grab Test)

Trapezoidal tear

Flame spread Smoke developed Water resistance “Boat test” Hydrostatic head

ASTM D779 AATCC 127

>60 min Pass (60 min rating)

ASTM E84 ASTM E84

Class A Pass Pass

*WeatherSmart Commercial is tested in accordance with ASTM International procedures. The values shown are typical values obtained in these tests.

Product characteristics

Composition

Nonwoven, nonperforated wrap, employing an advanced breathable polymer technology.

Roll size

10' x 125' 5' x 200'

Thickness

25 mils

Weight

3.27 lbs/100 sq. ft.

Product approvals, certifications and specifications

Exceeds ASTM E2556 Type II performance requirements Complies with the International Code Council Evaluation Services Acceptance Criteria for Water Resistive Barriers (AC 38) Complies as an alternative to the water-resistive barrier specified in Section 1404.2 of the 2012 and 2015 International Building Code ® and Section 1403.2 of the 2018 International Building Code ® Complies as an alternative to the water-resistant barrier specified in Section R703.2 of the International Residential Code ® ICC-ES Evaluation Report No. 3515 AATCC 127 - (American Association of Textile Chemists and Colorists) Method 127 Water Resistance: Hydrostatic Pressure Test ASTM D779 - Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method ASTM D 4533 - Standard Test Method for Trapezoid Tearing Strength of Geotextiles ASTM D5034 - Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials ASTM E96 - Standard Test Method for Water Vapor Transmission of Materials ASTM E2178 - Standard Test Method for Air Permeance of Building Materials

Featuring a range of compatible weather barriers, flashings and sealants, the Henry ® 1-2-3 Moisture Control System ™ makes it easier than ever to build with confidence. Henry, Building Envelope Systems, Moistop, WeatherSmart and Super Jumbo Tex are registered trademarks of the Henry Company

Ask us today about other Henry ® solutions that help manage the flow of water, air, vapor and energy.

Building Envelope Systems ® Wall & Window | Roof | Foundation

csfhenry@henry.com | 1-800-773-4777 www.henry.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12-13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131

Made with FlippingBook Digital Publishing Software