WeatherSmart ® D
Performance standards you can trust WeatherSmart D is tested in accordance with ASTM procedures. It is a scientifically advanced housewrap designed for use within a variety of exterior wall assemblies. It provides excellent protection from wall damage due to water intrusion and condensation.
Limitations: Product should be covered within six months. To ensure maximum exposure time, store unused product in an area not exposed to sunlight. Inspect product to insure it is free of any protrusions or damage which may detract from the weather-resistive barrier integrity. Holes, tears or punctures should be sealed with Moistop ® Sealant or Henry Sheathing Tape. This product is not recommended for horizontal, roofing or below grade applications. Ensure that a layer of Super Jumbo Tex ® 60 minute is used to separate WeatherSmart D and Portland cement stucco or mortar used in masonry veneer walls. Installation: WeatherSmart D should be installed in accordance with the local applicable building code. WeatherSmart D should be applied horizontally, with the upper layers overlapping the lower layer by a minimum of 6", and all vertical joints should be lapped a minimum of 12". It is recommended to tape all vertical seams with Henry Sheathing Tape; all vertical and horizontal seams should be taped to achieve an air barrier install; consult your design professional where necessary. Availability: Henry products are distributed nationwide. For product information and pricing, please call a Henry distributor near you. If you need assistance locating a participating distributor, please call our Customer Service Department at 1-800-773-4777. Henry Product Warranty Information: This product may be eligible for the 15-year Henry 1-2-3 Moisture Control System Warranty when used in conjunction with other products. See https://us.henry.com/warranty for details. We, the manufacturer, warrant only that this product is free of defects, since many factors which affect the results obtained from this product – such as weather, workmanship, equipment utilized, and prior condition of the substrate – are all beyond our control. We will replace at no charge any product proved to have a material defect within 12-months of purchase, provided it has been applied in accordance with our written directions for uses we recommend as suitable for this product. Proof of purchase must be provided. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO ONE, INCLUDING THE MANUFACTURER, SHALL HAVE ANY LIABILITY OF ANY KIND BEYOND PRODUCT REPLACEMENT, INCLUDING FOR NEGLIGENCE OR FOR DIRECT, CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES, RESULTING FROM ANY MISUSE, DEFECTS OR DELAYS CAUSED BY REPLACEMENT OR OTHERWISE. IF PURCHASER DOES NOT ACCEPT THESE TERMS, PURCHASER MAY RETURN WITHIN 30-DAYS OF PURCHASE ALL UNOPENED CONTAINERS OR PACKAGES OF PRODUCT PURCHASED FOR A FULL REFUND. RETENTION OF PRODUCT BEYOND 30-DAYS, OR USE OF PRODUCT SHALL CONSTITUTE ACCEPTANCE OF THESE TERMS, CONDITIONS, AND DISCLAIMERS. THIS LIMITED WARRANTY AND LIABILITY DISCLAIMER PROVIDES THE PURCHASER’S EXCLUSIVE REMEDY FOR ANYTHING RELATING TO THE PRODUCT. To the extent that any part of this LIMITED PRODUCT WARRANTY AND LIABILITY DISCLAIMER is determined unenforceable under the law of the place of purchase of the product, that part is severed and the remainder of these terms remain in full force and effect. To the extent permitted by law, the duration of any implied warranties is limited to the duration of Henry’s express warranty. This warranty language supersedes any language found elsewhere, including product labels, sell sheets and/or technical documents.
Physical/ performance property Dry breaking force
Test method
WeatherSmart D
WeatherSmart Drainable (for reference)
ASTM D5034 (Grab Test)
MD - 60 lbs. CD - 45 lbs.
MD - 51 lbs. CD - 40 lbs.
Moisture vapor transmission
ASTM E 96, Procedure A
163.7 g/sm/day 23.5 Perms
105 g/sm/day 15 Perms
Water resistance
ASTM D779
>60 mins
>60 mins
Flame spread Smoke developed
ASTM E84
Class A
Class A
Drainage efficiency
ASTM E2273
>95%
>95%
Air permeance at 75 pascals
ASTM E2178 <0.02 L/s/sqM <0.02 L/s/sqM
WeatherSmart D is tested in accordance with ASTM procedures. The values shown are typical values obtained in these tests.
Product characteristics
Composition
Spunbond polypropylene fabric laminated onto a permeable polypropylene film.
Roll size
5', 9' or 10' x 125'
Weight
1.84 lbs/100 sq. ft.
Product approvals, certifications and specifications
Complies with the International Code Council Evaluation Services Acceptance Criteria for Water Resistive Barriers (AC 38) Complies as an alternative to the water-resistive barrier specified in Section 1404.2 of the International Building Code ® Complies as an alternative to the weather-resistant sheathing papers specified in Section R703.2 of the International Residential Building Code ® Intertek Code Compliance Research Report CCRR-0442 ASTM D779 - Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method ASTM D5034 - Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials ASTM E96 - Standard Test Method for Water Vapor Transmission of Materials ASTM E2178 - Standard Test Method for Air Permeance of Building Materials ASTM E2273 - Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies Exceeds ASTM E2556 Type II performance requirements
Featuring a range of compatible weather barriers, flashings and sealants, the Henry ® 1-2-3 Moisture Control System ™ by Henry ® makes it easier than ever to build with confidence. Henry, WeatherSmart, Moistop and Super Jumbo Tex are registered trademarks of the Henry Company
Ask us today about other Henry ® solutions that help manage the flow of water, air, vapor and energy.
Building Envelope Systems ® Wall & Window | Roof | Foundation
csfhenry@henry.com | 1-800-773-4777 henry.com
© 2022 Henry Company. All rights reserved. Printed in U.S.A 215.3US.E573 (05/22)
Made with FlippingBook Digital Publishing Software