Hendrickson Trailer Parts Catalog

PRIMARY FIXED SUSPENSION SYSTEM

HT ® Series Suspension Components

QTY.

ITEM DESCRIPTION

PART NO.

PER SUSP. FITS MODELS HT190 ? or N-HT190 ?

TRI-FUNCTIONAL ® II BUSHING KIT 2 4a Welded Alignment

4

S-6914

2

Includes bushing, bushing tube spacers, cap screw, prevailing torque hex nut, liner and lube Includes bushing, bushing tube spacers, round head bolt, prevailing torque hex nut, hardened washers and lube

4b QUIK-ALIGN ®

S-24691

2

5 6

BUSHING TUBE SPACER PIVOT BOLT KIT 6a Welded Alignment

S-21099

4

All models

S-3646

2

Includes cap screw, prevailing torque hex nut and liner Includes round head bolt, hardened washers and prevailing torque hex nut

6b QUIK-ALIGN

S-24679

2

7

ALIGNMENT COLLARS 7a Welded Alignment

S-2770 S-20925 S-20924

4 2 2

Collars are welded to frame bracket Alignment hole is off center Alignment hole is centered Includes (1) U-bolt and hardware

7b Eccentric, QUIK-ALIGN (outer) 7c Concentric, QUIK-ALIGN (inner)

8

U-BOLT KIT

8a Standard (with stepped U-bolt)

S-21140/4

4

U-6.75-001 U-6.75-002

U-6.75-003

U-7-001

U-7-021

U-7-024

U-7.5-001 U-9-001 U-9-022 U-12-001 UB6-030 UB9-001 U-6-020 UB6-020 UB7-021

U-7.5-501 U-9-003 U-9-024 U-12-030 UB7-001 UB12-001 U-6.75-020

U-7.5-517

U-9-007 U-9-030

U-12-031 UB7.5-001 UB12-003

8b Flattened 3

S-22894/4

4

U-7-020 UB7-020

UB6-022 UB9-020

9

AXLE SPACER 4

S-20701

4

Axle spacer is not needed with new stepped U-bolt. For use with flattened U-bolt only.

10

SHOCK ABSORBER

S-20001

2

U-6-020 U-7-021

U-7-001 U-7-024

U-7-020

U-7.5-001 U-9-001 U-9-020 U-12-001 UB6-020 UB7-001 UB7.5-020 UB12-001

U-7.5-020 U-9-003 U-9-024 U-12-030 UB6-022 UB7-020 UB9-001 UB12-003 U-7.5-517

U-7.5-501 U-9-007 U-9-030 U-12-031 UB6-030 UB7.5-001

UB9-020

S-20002 S-2212

2 2

U-6.75-001 U-6.75-002

U-6.75-003

U-6.75-020

S-23649

2

U-9-022

UB7-021

11

SHOCK STRAP KIT (Not Shown)

Includes (4) nylon ties and (2) shock straps Use with S-20001 or S-20002 shock

S-14587-1 S-14587-3 S-23086-5

1 1 1

Use with S-2212 shock Use with S-23649 shock

2. Bushing tool S-21307 is required to correctly re-bush the suspension. 3. Must order axle spacer (item #9). 4. Must order with flattened U-bolt (item #8b).

NOTE: Identification tag can be found on the front of the roadside frame bracket or the inside of the curbside beam.

145

www.hendrickson‑intl.com

Refer to Hendrickson Literature No. L83 - HT Series HT190U Parts List

Made with FlippingBook Ebook Creator