VANTRAAX ® HKANT 46K Slider Top-Mount
SLIDER SUSPENSION SYSTEM
SUSPENSION ASSEMBLIES — HKANT 46K - Narrow Bushing / Tapered Beam Model
SYSTEM
ITEM DESCRIPTION
PART NO.
QTY.
NOTE
29 30 31
HALFTRAAX™ AXLE/BEAM WELDMENT
HTRAAX.###
2
Contact Hendrickson for assistance See L1266 Frame Bracket Parts List
FRAME BRACKET
AIR SPRING 16" ride height and above Below 16" ride height
S-22948 S-21800
4 4
Replaces C-21966 Replaces C-21800
32 AIR SPRING MOUNTING KIT (per air spring) - When model includes a cast, bolt-on pedestal under the air spring. 14" - 18" ride heights S-22619/2 4
Includes Spiralock nuts, pipe plug and flange nut Includes Spiralock nuts, pipe plug, air fitting and flange nut
19" ride height
S-22630/2
4
33 AIR SPRING SPACER - When model includes a cast, bolt-on pedestal under the air spring.
19" ride height 1-1/8" spacer 15.5" ride height
B-22510-1
4 4
34
AIR SPRING MOUNTING PLATE
S-27042
35 CAST AIR SPRING PEDESTAL KIT - When model includes a cast, bolt-on pedestal under the air spring. (Illustrations 1 and 2) 16" ride height with 2" pedestal S-27447-1 2 Includes left and right side pedestals and fasteners 16.5" ride height with 2.57" pedestal S-27447-2 2 Same as above 14" and 17" ride heights with 3.17" pedestal S-27447-3 2 Same as above 15", 15.5", 18" and 19" ride heights with 3.91" pedestal S-27447-4 2 Same as above 36 SHOCK ABSORBER S-23566 4 Standard duty 37 SHOCK BOLT KIT S-24049/2 4 Includes shear bolt, spacer, washers, hex bolt and hex nut 38 SHOCK SPACER S-27196 4 39 SHOCK STRAP KIT (Not shown) C-23086-1 4 Includes (2) straps, (2) clevis and (4) ties 40 TRI-FUNCTIONAL ® PIVOT BUSHING KIT 1 S-26321 2
Narrow bushing, includes (2) bushings, (2) pivot bolt kits, (4) bushing tube spacers and lubricant pack
41
QUIK-ALIGN ® PIVOT BOLT KIT
S-24705
4
Contains 7" bolt, nut and hardened washers
42
QUIK-ALIGN ALIGNMENT COLLAR 42a Concentric (inner)
S-20924 S-20925 S-26807
4 4 8
Pivot bolt hole is centered
42b Eccentric (outer) BUSHING TUBE SPACER
Pivot bolt hole is offset from center Outer diameter dimension of TRI-FUNCTIONAL bushing inner metal
43
is 2.6"; inner hole dimension of bushing tube spacer 2.95"
1. Bushing tool S-24736 is required to correctly re-bush the suspension.
Note: Identification can be found on the roadside slider box rail above the front frame bracket there will also be a blank INTRAAX tag on the inside of the curbside beam.
193
www.hendrickson‑intl.com
Refer to Hendrickson Literature No. L890 - VANTRAAK ® HKANT Parts List
Powered by FlippingBook