VANTRAAX ® Low Ride / Ramp Ready HKAL 46K
SLIDER SUSPENSION SYSTEM
SLIDER BOX ASSEMBLY
SYSTEM
ITEM DESCRIPTION
PART NO.
QTY.
NOTE
1 2
QUIK-DRAW ® PNEUMATIC PIN-PULL MECHANISM AFTERMARKET SLIDER BOX REPLACEMENT
Refer to L751 - QUIK-DRAW Parts List
AMBOX.###
1
Please contact Hendrickson for assistance
3a
LOCKING PIN (Units built before Sept. 2012) 1.375" diameter pin
S-28290 S-28289
4 4
4" (TTMA) & 6" body rail hole spacing
1.625" diameter pin
4" body rail hole spacing
3b
LOCKING PIN (Units built in Sept. 2012 and after) 1.375" diameter pin
S-32389 S-32388
4 4
4" (TTMA) & 6" body rail hole spacing
1.625" diameter pin
4" body rail hole spacing
4a
LOCKING PIN SPRING (Units built before Sept. 2012) 48" box with QUIK-DRAW
3 . 25" spring 3 . 8" spring
B-28930 B-22000
4 4
42" box with QUIK-DRAW
4b
LOCKING PIN SPRING (Units built in Sept. 2012 and after) 42", 48" and 54" box with QUIK-DRAW
4 . 5" spring
B-32500
4 4
3 /
3 /
5a 5b
CLEVIS PIN (Units built before Sept. 2012) CLEVIS PIN (Units built in Sept. 2012 and after) Cast iron end
SA-5200-6
8 " × 1
8 "
SA-5200-8 SA-5200-10 SA-8100-4 S-32967-1 S-32967-2 S-32967-3 SA-1500-2
4 4 4 2 2 2 6 1 6
3/8" × 1.16" 3/8" × 1.82"
Composite end
3 /
1 /
6 7
SPRING PIN (Units built before July 2014)
8 " × 2
2 " roll pin
LOCKING PIN LINK (Not shown) 42" box
48" box 54" box
3 / 8 " I.D. flat washer
8 9
LOCKING PIN WASHER
PIN WASHER (Units built before July 2014)
S-30641
3 / 32 " × 1" cotter pin
10 11
LOCKING COTTER PIN BODY RAIL CLIP 11a 3.4" clip height
SA-1700-12
S-24459
4
Use with 1.625" locking pin and 4" body rail hole spacing or 1.375" locking pin and 4" body rail hole spacing (TTMA) Use with 1.375" locking pin and 6" body rail hole spacing
11b 3.8" clip height
S-24460
4
12 13 14
BODY RAIL BOLT
SA-6900-2 A-22367 S-14342-3
8 4 2
1 /
2 "-13 × 1
1 / 2 " flanged bolt
BODY RAIL CLIP SPACER (Not shown)
2" clip hole centers
SLIDER WEAR PAD KIT
Includes (1) slider wear pad and hardware
Note: Narrow hanger shown. Pin pull mechanisms are identical for both wide and narrow width slider models. Note: Identification tag can be found on the roadside slider box rail above the front frame bracket. There will also be a blank INTRAAX ® tag on the inside of the curbside beam.
221
www.hendrickson‑intl.com
Refer to Hendrickson Literature No. L1080 - VANTRAAK ® HKAL Parts List
Powered by FlippingBook