Hendrickson Trailer Parts Catalog

Dealer Recommended Stocking List

STOCKING LIST

DESCRIPTION

PART NO.

RECOMMENDED STOCK QTY.

ZMD DOWN STOP KIT (Includes down stop and hardware) ULTRAA-K UTKNT 40K slider (units after March 2017)

S-38100-1

4

PIVOT BUSHING KITS (Includes bushing, pivot bolt kit, wear pads and lubricant) QUIK-ALIGN ® , wide bushing

S-24691 S-26321 S-6914

4 3 4

QUIK-ALIGN, narrow bushing (includes 2 bushings)

Welded alignment, wide bushing

PIVOT CONNECTION HARDWARE Alignment collar — most welded alignments Alignment collar — QUIK-ALIGN ® concentric (inner) Alignment collar — QUIK-ALIGN eccentric (outer) Bushing tube spacer — wide pivot connection Bushing tube spacer — narrow pivot connection

S-2770 S-20924 S-20925 S-21099 S-26807

4 4 4 4 4

PIVOT BOLT KITS (Alignment collars not included) QUIK-ALIGN, wide bushing

S-24679 S-24705

4 4

QUIK-ALIGN, narrow bushing

U-BOLT KITS (One U-bolt with nuts and washers) HT ® Series HT250US suspension (5.5" and 6.5" RH, flattened bolt) Most HT/HS Series top-mount and HT Series underslung HT190U suspensions

S-22894/4 S-21140/4

1 2 2

Axle spacer (Must use with flattened U-bolt)

S-20701

TOOLS Bushing Tool, wide bushing Bushing Tool, narrow bushing

S-21307 S-24736 S-24536

1 1 1

E-20 socket — 1" drive

QUIK-DRAW ® PNEUMATIC PIN PULL SYSTEM Three-way auto reset valve with fittings

VS-25224 VS-25223 S-28061-2 S-28062-2 S-35294-2 S-35295-2

2 2 1 1 1 1

Three-way auto reset valve

48" & 54" box front actuator (cast iron – units built before Feb. 2015) 48" & 54" rear actuator (cast iron – units built before Feb. 2015)

48" & 54" box front actuator with fittings (composite – units built in and after Feb. 2015) 48" & 54" rear actuator with fittings (composite – units built in and after Feb. 2015)

SLIDER LOCKING PIN UNITS BUILT BEFORE SEPT. 2012 1.375” Diameter, 4” hole center (TTMA)

S-28290 S-28290 S-28289 S-32389 S-32389 S-32388

4 4 4 4 4 4

1.375” Diameter, 6” hole center 1.625” Diameter, 4” hole center

UNITS BUILT AFTER SEPT. 2012 – 40K & 50K / JULY 2014 – other VANTRAAX ® 1.375” Diameter, 4” hole center (TTMA)

1.375” Diameter, 6” hole center 1.625” Diameter, 4” hole center

23

www.hendrickson‑intl.com

Refer to Hendrickson Literature No. No. L1181 - Dealer Stocking List

Made with FlippingBook Ebook Creator