SAFETY
HOOKING UP TO TRACTOR
1. Keep well clear when backing up to machine. 2. Shut down tractor. 3. Secure & lock drawbar pin in place. 4. Install safety chain by crossing the chains under the tongue and secure to the drawbar hitch frame of the tractor. 5. Clean all hydraulic couplings. 6. Hoses are colour coded according to function Pg 21 . 7. Beware of high pressure fluid. 8. Plug in hoses to respective remote ports. 9. Plug in electrical lead to tractor connection. 10. Release implement jack & store. 11. Check hydraulic cylinders are fully primed to avoid serious injury or death. 12. See Pg 21 to prime hydraulic system. UNHOOKING 1. Machine must be fully lowered or in transport position with safety locks engaged. 2. Use wheel chocks. 3. Release hydraulic pressure from system. 4. Lock Implement jack in place. 5. Wind implement jack to take weight of machine off tractor drawbar. 6. Disconnect hydraulic hoses.
Figure 22
Figure 23
7. Disconnect electrical lead (if fitted). 8. Remove safety chains and drawbar pin.
If implement jack is damaged DO NOT USE , replace immediately, or severe bodily harm may result.
Figure 24
24
2940P, 2945P & 2950P POWERFLEX SPEEDTILLER
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker