THIS IS A GUIDE ONLY AND MUST BE READ IN CONJUNCTION WITH INSTRUCTION MANUAL
HEADLANDS/ TURNING • Always raise machine when on headlands and when turning.
S P E E D T I L L E R S T A R T - U P T I P S Ⓡ
DEPTH CONTROL • Full ground disturbance begins at 63.5mm (2.5”) depth. • Ensure wing roller heights are set the same (folding wing model only). TILT ADJUSTMENT (SETTING TO REDUCE SIDEWAYS TRACKING) • Start with front disc 20mm higher than back discs. • Follow instructions for tilt control settings & adjustments, pg 30-31. • Always start shallow then adjust down to required depth. FRONT LATERAL DISC POSITIONING IS FACTORY SET . See pg 30-32 for adjustment setting. WING DOWN PRESSURE • Fully extend wing fold circuit (YELLOW). Do NOT place in float-mode. • Apply wing down pressure only where soil is hard and dry. • Only use wing down pressure when required. SPEED RANGE • 8-15kph. (5-9mph) • Greater activity occurs at higher speeds
ROAD TRAVEL SPEED LIMIT • 32kmh (20mph)
27
2940P. 2945P & 2950P POWERFLEX SPEEDTILLER
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker