FOR SAFE WORKING LIVES
HAND PROTECTION 1
CATALOGUE VOL2
HAND PROTECTION 1
CUT RESISTANT GLOVES
12-15
INDUSTRIAL PUNCTURE RESISTANT GLOVES
16
GENERAL HANDLING GLOVES
18-22
MECHANICS / ANTI-IMPACT & VIBRATION RESISTANT GLOVES
24-27
28
COLD RESISTANT GLOVES
HEAT RESISTANT & WELDING GLOVES 30-32
33
ELECTRICAL SAFETY GLOVES
CHEMICAL RESISTANT GLOVES & GAUNTLETS GENERAL PURPOSE COTTON & LEATHER GLOVES SINGLE USE DISPOSABLE GLOVES & ACCESSORIES
SELECTION OF THE RIGHT TYPE OF GLOVE IS ESSENTIAL IN PROTECTING USERS FROM HAZARDS THAT THEY MAY ENCOUNTER DURING THEIR WORK. Hazards can include chemicals, biological hazards, heat, extreme cold, abrasive surfaces and mechanical hazards. Gloves can protect against chemical exposure, infections, burns, cuts, punctures and other damage to skin tissue, but may even guard against bone and cartilage trauma of the hand.
34-37
38-43
44-45
HANDS AT WORK ARE EXTREMELY VULNERABLE TO A WIDE RANGE OF HAZARDS WHICH INCLUDE CUTS, BLOWS, CHEMICAL ATTACK AND TEMPERATURE EXTREMES. YOUR HANDS ARE YOUR MOST IMPORTANT TOOLS, SO WE WANT TO PROTECT THEM WITH THE BEST. HEALTH AND SAFETY FOR YOUR HANDS
CARE BEFORE USING GLOVES IN CHEMICAL ENVIRONMENTS
BEFORE USE
• Make sure gloves are dry both inside and out before reusing • Thoroughly wash and dry your hands before donning the gloves.
WHAT GOES INTO GREAT GLOVES? With our wide range of work gloves you can count
DURING USE
on the ultimate combination of functionality, durability, economy and protection to match your specific job requirements. Today, industry has increasingly complex, sensitive and often hazardous manufacturing and handling processes. Hence our offering helps identify your safest “fit for purpose” options.
• Slightly folding the sleeve of the glove over itself will help prevent unwanted substances from coming into contact with the arms • Frequently check that the gloves are not displaying any signs of degradation or becoming porous • DO NOT use gloves beyond the recommended exposure time, as highlighted within a COSHH (Control of Substances Hazardous to Health) assessment.
THE IMPORTANCE OF GLOVE MAINTENANCE
Wearers must take careful note of the condition of their gloves and replace them as soon as any degradation, contamination or damage has taken place that renders the gloves ineffective for their intended function. This is especially important for chemical-resistant gloves that offer the wearer protection from serious hazards. Check for gloves that have become brittle or cracked, softened excessively, or show signs of becoming abnormally porous. Effective protection is maintained by regular replacement of the gloves.
REMOVAL
• Always follow user instructions when removing gloves • Heavily contaminated gloves should be disposed of safely and should be removed from the hand by easing each glove off with the other until they can be safely dropped into a suitable container.
CLEANING
Protective gloves must be worn
• Remove excess contaminant. If safe to do so, gloves may then be washed with mild detergent in warm water (provided that the contaminant does not have an adverse reaction to water) and left to dry.
GLOVE STANDARDS AND RECENT CHANGES TO EN388 THE EN388 STANDARD HAS CHANGED IN MANY FACETS. PREVIOUSLY, THE EN388 WAS A COMPILATION OF FOUR TESTS (ABRASION, CUT, TEAR, PUNCTURE) USED FOR DETERMINING THE MECHANICAL PROTECTION LEVELS OF PPE MATERIALS. Used in European markets, this test has been making its way globally as a widely accepted standard for measuring protective properties of industrial PPE. Even the Australian Standard has this test embedded in its regulations. The main changes revolve around cut testing. It’s a topic that’s been talked about in the hand safety industry over the past several years regarding cut testing: how accurate is EN388’s old Coup Test when it comes to high cut resistance materials? To be clear, this is the test that determined that a glove was Cut 5 or 3 etc. The Coup Test measures the amount of cut resistance using a circular blade that travels back and forth (like a pizza cutter) across the palm section of the product being tested under a fixed weight of 500 grams. When testing materials have a high amount of cut resistance, the blade dulls over time, which can skew the results. This, along with other aspects of the test, makes it hard for safety managers and users alike to gauge the true cut resistance of their PPE. Now, with the revised standard, the Coup Test is limited to a maximum number of 60 rotations, whether the blade has cut through the material sample or not. If the test reaches 60 rotations, the material is required to be tested using the ISO 13977 Cut Resistant Method, also commonly known as the TDM 100 Test. The result of the TDM Test is used to determine the actual cut resistance of the glove material and assesses how much force is needed to cut the material over a 20mm stroke using a straight blade. Cut levels in this test are characterized by letters A to F. The addition of the ISO 13977 Cut Test Method and the TDM Test will help ensure that cut materials are receiving accurate scores, which in turn will help workers make more informed decisions about their safety. With these changes, manufacturers can now opt out of performing the Coup Test and perform only the TDM 100 test if desired.
ADDITIONAL EN388 CHANGES
ABRASION RESISTANCE TESTING The revised EN388 Standard also calls for a new type of abrasive paper to be used during abrasion resistance testing. The original test method will remain the same –a sample from the glove’s palm will be rubbed with abrasive paper to determine how long it takes for a hole to wear through the material. While not a significant modification, the updated method may change some abrasion resistance test scores. IMPACT PROTECTION If gloves have impact protection on the back of the hand, they have the option to be tested to verify their protective properties. EN 388:2016 contains a test for impact resistance where testing is carried out in accordance with clause 6.9 of EN 13594. Gloves must meet the requirement of level 1 of EN 13594:2015. The impact test consists of placing the (back-of-hand/knuckle) impact resistant material from the glove over a domed anvil (basically a block of metal with a flattened circular top surface) and dropping a 2.5kg flat face surface striker from a sufficient height to provide an impact energy of 5 joules. (Joules are the derived unit used to measure the force of one newton in the direction of its motion through a distance of one-newton meter.) The peak force is detected and recorded by a sensor that’s beneath the anvil. This test is done four times in each area of protection taken from four different gloves. This helps ensure the results are consistent across the board. To pass the test, the transmitted force needs to be less than or equal to 7 kilonewtons with no single results greater than 9 kilonewtons.
EN 388 EN 388
If TDM Cut Test has not yet been performed - X will be added to marking If Glove passes Impact protection standard - P can be added to marking
3X43EP
NEW! Impact Protection NEW! (TDM Test) Cut (N) Puncture (N) Tear
(Couple Test) Cut (Cycles) Abrasion
LOW Cut protection level
MEDIUM Cut protection level
HIGH Cut protection level
EXTRA HIGH Cut protection level
Performance level rating Cut resistance (Newton) Suggested applications
A
B
C
D
E
F
> 2
> 5
> 10
> 15
> 22
> 30
Light material handling without sharp edges objects, part assembly, automotive maintenance, construction, multipurpose...
Packaging, warehouse, light metal stamping, automotive and white goods parts assembly...
Ligth duty sheet metal and glass handling, metal stamping, plastics, tyre production, automotive and
Sheet metal and glass/bottle handling, metal stamping, light duty meat and poultry handling, carpentry, printing...
Heavy duty sheet metal handling. Plate glass handling, metal recycling, waste management, meat and poultry handling, printing...
Heavy duty sheet metal
handling, metal recycling, waste management, heavy duty meat processing, slaughterhouses...
white goods industries...
bunzlsafety.com.au | 5 1
COMPLIANCE AND TEST STANDARDS WHAT THE SYMBOLS REPRESENT
WHAT THE NUMBERS REPRESENT
EN 388:2016
EN 388:2016 This Standard applies to all kinds of protective gloves giving protection from mechanical risks, in respect of physical problems caused by abrasion, blade cut, tearing or puncture.
EN 388
EN 388 EN 388
If TDM Cut Test has not yet been performed - X will be added to marking If Glove passes Impact protection standard - P can be added to marking
3X43EP
NEW! Impact Protection NEW! (TDM Test) Cut (N) Puncture (N) Tear
EN 374 This Standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.
EN 374
(Couple Test) Cut (Cycles) Abrasion
CHEMICAL RESISTANCE The letter code applies to the chemicals the glove is resistant to.
EN 511: COLD
PERFORMANCE LEVEL
(a) Resistance to convection cold (b) Resistance to contact cold
0-4 0-4
(c) Permeability to water
0-12 250
>15 >15 >15
Low chemical resistance to unspecified chemicals.
3 4
350 500
EN 511
EN 511 This Standard applies to gloves which protect the hands against convective and contact cold.
EN 407: THERMAL HAZARDS
PERFORMANCE LEVEL
(a) Burning behaviour (b) Contact heat (c) Convective heat
0-4 0-4 0-4
EN 407 This Standard specifies thermal performance for protective gloves against heat and/or fire.
EN 407
(d) Radiant heat 0-4 (e) Small splashes of molten metal 0-4 (f) Large splashes of molten metal 0-4
EN 659 This Standard defines performance requirements for gloves designed to protect fire fighters against heat and flames.
EN 659
CONTACT HEAT
EN 659 A sample is taken from the palm area of a glove. The outside of the glove is put on a hot surface and the temperature of the inside of the glove is then monitored. The temperature on the inside of the glove must take 15 seconds or more to rise by 10°C from room temperature. EN 407 PERFORMANCE LEVEL CONTACT TEMP. ºC THRESHOLD TIME SECONDS
EN 421 This Standard lays down test methods and performance criteria for gloves offering protection against ionising radiation and radioactive contamination.
1 2 3 4
100 250 350 500
>15 >15 >15 >15
EN 455 Medical gloves for single use. If a glove is to be used for food handling, it is required to carry either the words ‘for food use’ or this symbol.
6 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2 1
THE IMPORTANCE OF GLOVE MAINTENANCE Wearers must take careful note of the condition of their gloves and replace them as soon as any degradation, contamination or damage has taken place that renders the gloves ineffective for their intended function. This is especially important for chemical-resistant gloves that offer the wearer protection from serious hazards. Check for gloves that have become brittle or cracked, softened excessively, or show signs of becoming abnormally porous. Effective protection is maintained by regular replacement of the gloves.
GLOVE SIZES
Poorly fitting gloves can cause injury due to the glove slipping and the user lacking dexterity if the glove are too loose. Use the guide below to assist with choosing the right sized glove.
WHAT’S MY GLOVE SIZE? Measure the circumference of your hand in inches or centimetres between thumb and knuckle, then locate your size in the chart.
CARE BEFORE USING GLOVES IN CHEMICAL ENVIRONMENTS
BEFORE USE
•
Make sure gloves are dry both inside and out before reusing
• Thoroughly wash and dry your hands before donning the gloves.
DURING USE
• Slightly folding the sleeve of the glove over itself will help prevent unwanted substances from coming into contact with the arms • Frequently check that the gloves are not displaying any signs of degradation or becoming porous • DO NOT use gloves beyond the recommended exposure
time, as highlighted within a COSHH (Control of Substances Hazardous to Health) assessment.
REMOVAL
SIZE ALPHA
SIZE NUMERIC
HAND IN CENTIMETERS
HAND IN INCHES
• Always follow user instructions when removing gloves • Heavily contaminated gloves should be disposed of safely and should be removed from the hand by easing each glove off with the other until they can be safely dropped into a suitable container.
XXS
5
12.7 - 15.2
5” - 6”
XS
6
15.2 - 17.7
6” - 7”
S
7
17.7 - 20.3
7” - 8”
M
8
20.3 - 22.8
8” - 9”
CLEANING
L
9
22.8 - 25.4 9” - 10”
• Remove excess contaminant. If safe to do so, gloves may then be washed with mild detergent in warm water (provided that the contaminant does not have an adverse reaction to water) and left to dry.
XL
10
25.4 - 27.9 10” - 11”
2XL
11
27.9 - 30.4 11” - 12”
bunzlsafety.com.au | 7 1
THE ART OF PERFORMANCE
THE SYMBOLS APPEARING NEXT TO NINJA GLOVES INDICATE THE COATING TECHNOLOGIES USED UNLESS OTHERWISE STATED
Excellent Dry and Oil Grip
NFT™ - UNMATCHED COMFORT AND DURABILITY
The New Foam and Premium Foam Technology is a unique proprietary technology offering the most technologically advanced, lightweight, breathable, comfortable and durable gloves that feel like a second skin. Rigorously engineered to give outstanding grip, abrasion resistance and dexterity for precision handling in oily, greasy and dry environments. It is one of Ninja ® ’s next-generation technologies.
HPT™ - SUPERIOR GRIP AND DEXTERITY
The Hydropellent Technology is a unique proprietary coating that repels liquid and provides excellent grip in wet, dry and oily conditions. The HPT™ offers secure handling gloves that are extremely lightweight and dexterous with superior grip features for maximum control in wet environments. Furthermore, this unique coating has “encapsulated air pockets” which absorb and mitigate the effects of light vibrations enhancing its grip performance.
1
8 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
GLOVE SELECTION GUIDE
GLOVE TYPE PHOTO
USE TYPE
ADVANTAGES
DISADVANTAGES
• Good general lab use glove, adequate protection from many organic solvents, oils, greases, and some acids and bases • Good protection from blood, cell lines, and tissue • Clear indication of tears and breaks • Excellent dexterity • Non-allergenic • Good protection from many biological agents, including blood, cell lines, and tissue • Provides good protection from some acids and bases • Excellent dexterity
• Incidental chemical contact use only • General lab chemical use • Commonly used in the medical field
• Not effective for direct contact use • Not effective for use with many halogenated solvents
NITRILE, DISPOSABLE
• Not effective for direct contact use • Not effective for use with many organic solvents • Allergenic • Difficult to detect tears and breaks
• Incidental chemical contact use only • Commonly used in the medical field • Not suitable for many lab settings
LATEX, DISPOSABLE
• Good protection from many ketones, esters, gases, vapours, acids, and bases • Can be decontaminated / reused • Puncture and tear resistant
• Not effective for use with gasoline, aliphatic, aromatic, and halogenated hydrocarbons • Poor dexterity
• Suitable for direct contact with some chemicals
NEOPRENE RUBBER
• Good protection from many acids, bases, oils, fats peroxides, and amines • Can be decontaminated / reused • Puncture and tear resistant
• Not effective for use with many organic solvents • Average dexterity
• Suitable for direct contact with some chemicals
PVC
• Good all-purpose work glove where very minor chemical contamination is possible; provide minimal chemical resistance • Can be decontaminated / reused • Puncture and tear resistant • Good dexterity and grip • Excellent cut resistance to sharp objects such as razor blades and pipette tips • Some provide minimal chemical resistance • Can be decontaminated / reused • Good dexterity and grip
GENERAL PURPOSE NITRILE COATED
• Not effective for direct and/or prolonged exposure to chemicals
• Incidental chemical contact use only
• Used when handling sharp objects • Incidental chemical contact use only
• Not effective for direct and/or prolonged exposure to chemicals
CUT-RESISTANT
• Good all-purpose work glove for non- hazardous material handling • Puncture and tear resistant
• Not effective for use with hazardous chemicals as leather absorbs liquids • Poor dexterity
• Non-hazardous material handling; not to be used with chemicals
LEATHER
• Excellent protection from hot surfaces such as autoclaves and drying ovens • Designed to be reused for long periods of time
• Not effective for use with hazardous chemicals as leather absorbs liquids • Poor dexterity
HEAT RESISTANT GLOVES
• Used when handling hot surfaces
• Reduces extent of injury by absorbing impact force. • Reduces the effect of vibration and therefore the risk of nerve compression and tendon inflammation in the hand and wrist
IMPACT RESISTANT GLOVES
• Used when there is risk of blunt trauma to palm, back of hand or both
• Some dexterity may be lost in to achieve additional safety
bunzlsafety.com.au | 9 1
10 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2 1
YOUR GUIDE TO GLOVE TYPES TO MAKE IT EASIER TO CHOOSE THE APPROPRIATE GLOVE FOR THE REQUIRED TASK(S), PLEASE USE THIS GUIDE BELOW.
PAGE 12-15
CUT RESISTANT GLOVES Protects hands from sharp tools or objects in dry environments
PAGE 16
INDUSTRIAL PUNCTURE RESISTANT GLOVES Protects hands from sharp tools or objects in wet and oily environments
PAGE 18-22
GENERAL HANDLING GLOVES Protects hands when performing general tasks in dry environments
MECHANICS / ANTI-IMPACT AND VIBRATION RESISTANT GLOVES Protects hands from impact damage and vibration
PAGE 24-27
PAGE 28
COLD RESISTANT GLOVES Protects hands when handling cold objects
PAGE 30-32
HEAT RESISTANT AND WELDING GLOVES Protection when handling hot objects
PAGE 33
ELECTRICAL SAFETY GLOVES Protects hands when performing general tasks in wet and oily environments
PAGE 34-37
CHEMICAL RESISTANT GLOVES & GAUNTLETS Protection from harmful chemicals/substances
PAGE 38-43
LEATHER & COTTON GLOVES Protects hands in general assembly environment
PAGE 44-45
SINGLE USE DISPOSABLE GLOVES Protects against cross-contamination
bunzlsafety.com.au | 11 1
CUT RESISTANT
AS/NZS 2161.2:2020 AS/NZS 2161.3:2020 BMP 757224 EN388:2016
AS/NZS 2161.2:2020 AS/NZS 2161.3:2020 BMP 757224 EN388:2016
NEW FOAM TECHNOLOGY
NEW FOAM TECHNOLOGY
4X31B MECHANICAL
4331B MECHANICAL
SLASH-TEC BA2 - CUT B FEATURES AND BENEFITS • Cut Level B 18 gauge HPPE, glass, nylon/spandex plaited composite knitted liner • Outstanding cut resistance, high performance engineered liners made from high tensile yarns made in Ninja ® 's own manufacturing facilities, for outstanding cut resistant quality • The most lightweight liner and coating for maximum comfort and cut resistance • Re-enforcement between thumb and forefinger greatly extends the life of the glove • Excellent grip in oily, dry and wet conditions • NFT coating enables air diffusion to release heat for 360° breathability
SLASH-TEC BA2 - CUT B OIL FEATURES AND BENEFITS • Cut Level B, 18 gauge HPPE, glass, nylon/spandex plaited composite knitted liner • Outstanding cut resistance, high performance engineered liners made from high tensile yarns made in Ninja ® 's own manufacturing facilities, for outstanding cut resistant quality • The most lightweight liner and coating for maximum comfort and cut resistance • Re-enforcement between thumb and forefinger greatly extends the life of the glove • Excellent grip in oily, dry and wet conditions • NFT coating enables air diffusion to release heat for 360° breathability
CARTON QTY 144 pairs
CARTON QTY 144 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
NIMAXIMC3GG
12
NIMXOILC3BL
12
S-2XL
Green
S-2XL
Blue
EN388:2016
4X43D MECHANICAL
AS/NZS 2161.2:2020 AS/NZS 2161.3:2020 AS/NZS 2161.4:1999 BMP 757224
Complies to Australian Standard AS/NZS 2161.2:2005 AS/NZS 2161.3:2005
EN388:2016
NEW FOAM TECHNOLOGY
4X42C MECHANICAL
EN407:2004
X1XXXX
SLASH-TEC CA3 - CUT C FEATURES AND BENEFITS • Cut Level C 15 gauge HPPE, glass nylon/spandex plaited composite knitted liner • High performance engineered liners made from high tensile yarns made in Ninja ® 's own manufacturing facilities, for outstanding cut resistant quality • The most lightweight liner and coating for maximum comfort and cut resistance • Re-enforcement between thumb and forefinger greatly extends the life of the glove • Excellent grip in oily, dry and wet conditions • NFT coating enables air diffusion to release heat for 360° breathability • Hi-vis liner and coating option for compliance visibility
SLASH-TEC DIAMOND DA3 - CUT D FEATURES AND BENEFITS • Cut Level D 15 gauge Dyneema ® Diamond, nylon/spandex knitted liner • Soft PU coating offering excellent grip as well as superb flexibility and comfort • The dramatically thin fibre of Dyneema ® Diamond technology allows for increased cut resistance without the fibreglass discomfort. It allos for better feel and control and radiates heat away from hands for 360° breathability
CARTON QTY 144 pairs 144 pairs
CARTON QTY 144 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
1
NIMAXIMC5BL NIMAXIMC5FY
12 12
NIDIAMNC5S5
12
S-2XL S-2XL
Blue
S-2XL
Light Green
Fluro Yellow
12 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
CUT RESISTANT
AS/NZS 2161.2:2020 AS/NZS 2161.3:2020 AS/NZS 2161.4:1999 BMP 757224
AS/NZS 2161.2:2020 AS/NZS 2161.3:2020 AS/NZS 2161.4:1999 BMP 757224 EN388:2016
EN388:2016
NEW FOAM TECHNOLOGY
NEW FOAM TECHNOLOGY
4X21D MECHANICAL
4X42F MECHANICAL
EN407:2004
D Cut EN388
F Cut EN388
X1XXXX
X1XXXX HEAT
SLASH-TEC FA6 - CUT F FEATURES AND BENEFITS • Superior Cut F resistance, made from Kevlar ® 360° protection • Proprietary fine 18 gauge liner feels like a second skin • Touchscreen compatible • Superior grip in oily, dry and wet conditions • NFT coating enables air diffusion to release heat for 360° breathability • Full thumb and forefinger reinforcement plus NFT ™ coating for high abrasion resistance
SLASH-TEC DA4 - CUT D FEATURES AND BENEFITS
• Excellent Cut D resistance, made from para-aramid steel composite yarn • Extremely lightweight 18 gauge liner offers high dexterity and tactile sensitivity • Touchscreen compatible • Highest level oil grip and excellent dry and wet grip • NFT ™ coating enables air diffusion to release heat for 360° breathability • Extreme durability and abrasion resistance plus thumb crotch reinforcement
CARTON QTY 120 pairs
CARTON QTY 120 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
NIRZRSTDOBBB0XS XS-3XL
12
NIRZRSTFEBBB XS-3XL
12
Black
Black
EN388:2016
4X42CP
AS/NZS 2161.2:2020 AS/NZS 2161.3:2020 AS/NZS 2161.4:1999 BMP 757224 EN388:2016
NEW FOAM TECHNOLOGY
4X42FP MECHANICAL
F Cut EN388
X1XXXX HEAT
SLASH-TEC FA6 - CUT F IMPACT FEATURES AND BENEFITS • Superior Cut F resistance, made from Kevlar ® 360° protection • Solid impact protection on the back of hand and fingers • Proprietary fine 18 gauge liner feels like a second skin • Touchscreen compatible • Superior grip in oily, dry and wet conditions • NFT coating enables air diffusion to release heat for 360° breathability • Full thumb and forefinger reinforcement plus NFT ™ coating for high abrasion resistance
HYBRIDZ - CUT C IMPACT FEATURES AND BENEFITS • Anti-Impact: Padded palm insert for effective damping of impacts to the hand and vibrations • 360° Cut C resistance • Impact Protection: Soft and flexible TPR protects against blows or crush injury to the backs of hand and fingers • Breathable foam nitrile palm with extra flexibility for optimal fit and dexterity
1
CARTON QTY 72 pairs
CARTON QTY 120 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
COHYBRIDZGY
6
NIRZRSTFIBB
12
M-2XL
Grey
XS-3XL
Black
bunzlsafety.com.au | 13
CUT RESISTANT
EN388
4X42C
RHINO WITH LEATHER PALM - CUT C FEATURES AND BENEFITS • Cut C Level 5 protection • Leather palm on 10g seamless shell for extra resistance to cuts and punctures • Heavy duty with high dexterity • Resistance to contact heat rated to level 1 • Excellent abrasion resistance • Effective wet grip
IGUANA PU - CUT C FEATURES AND BENEFITS • Cut Level C protection • Puncture Level 2 protection • Seamless 13 gauge shell for enhanced dexterity • PU coat for wet, oily and dry enhanced grip • Hi vis yellow for increased visibility
CARTON QTY 120 pairs
CARTON QTY 120 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
FRCLTPUC5FY
12
FRRHINOC5GY
12
S-2XL
Fluro Yellow
M-2XL
Grey
EN388
EN388
4X43C
4X42C
MAARAKA NITRILE - CUT C FEATURES AND BENEFITS • Cut resistance Level C protection • Puncture Level 3 protection • 360° cut resistance • Micro foam nitrile coating for superior wet and oily grip
IGUANA NITRILE - CUT C FEATURES AND BENEFITS • Cut C Level 5 protection • Puncture Level 3 protection
• Breathable foam nitrile palm with extra flexibility for optimal fit and dexterity • Extra thumb crotch reinforcement provides extreme durability in high wear areas • Air capillaires provide enhanced padding and vibration
• Seamless 13 gauge shell for enhanced dexterity • Micro foam nitrile coat for superior wet and oily grip • Air capillaries provide enhanced padding and vibration
PACK QTY MOQ
CARTON QTY 120 pairs 120 pairs
CARTON QTY 120 pairs
CODE
COLOUR
CODE
SIZE
COLOUR PACK QTY MOQ
1
FRIGUANC5BK FRIGUANC5FL
12 12
CWMAARAC5FY XS-3XL
6
Black
Fluro Yellow
Fluro Lime
14 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
1
bunzlsafety.com.au | 15
CUT RESISTANT
EN 388 EN 388:2016
4X42C
HYFLEX 11-561 NITRILE - CUT C FEATURES AND BENEFITS • Ultra-lightweight design • Excellent durability and abrasion resistance • Dermatest ® and Oeko-Tex ® certification for skin-friendliness • Touchscreen compatible
CARTON QTY 12 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
AN011561IBY
12
5-12
Blue Grey
EN 388 EN 388:2016
4X43D
EN 16350
HYFLEX 11-571 - CUT D FEATURES AND BENEFITS • Ultra-lightweight design • Superior resistance using Next Generation single HPPE yarn • Excellent durability and abrasion resistance • Touchscreen compatible • Part of the Ansell Earth sustainably made range
1
CARTON QTY 144 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
AN0011571GY
12
6-12
Grey
16 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
INDUSTRIAL PUNCTURE RESISTANT GLOVES
EN 388 EN 388:2016
EN 388 EN 388:2016
4X12F
4X43F
HEXARMOR POINTGUARD ULTRA 9032 - CUT F NITRILE & LEVEL 5 NEEDLESTICK FEATURES AND BENEFITS • Highest needlestick and cut resistance available on noted enhanced areas, with EN388 Cut Level F and needlestick Level 5 (tested to ANSI/ISEA 105-2016 ASTM F2878 Hypodermic Needle Puncture Test) • 15-gauge hi-vis polyester shell enhances visibility and worker compliance • Sandy nitrile three-quarter knuckle palm coating provides superior grip and abrasion resistance • Knit wrist helps prevent dirt and debris from entering the glove • Seamless construction for enhanced comfort and breathability while maintaining dexterity and tactility
HEXARMOR HERCULES NSR 3041 - CUT F & LEVEL 5 NEEDLESTICK FEATURES AND BENEFITS
• Three layers of needlestick SuperFabric ® brand material in the palm and back-of-hand provides EN388 Cut Level F and needlestick Level 5 (tested to ANSI/ISEA 105-2016 ASTM F2878 Hypodermic Needle Puncture Test) • Two layers of SuperFabric ® brand material in the fingertips and fourchettes/finger side walls provides needlestick Level 2 • Specialised silicone gripping surface on palm • Full coverage design and pre-curved shape for maximum comfort and ultimate protection • SlipFit ® cuff assists a quick on and off between tasks
CARTON QTY 36 pairs
CARTON QTY 36 pairs
CODE
SIZE
COLOUIR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
UVPG90320BL
7-10
Blue
1
NNHEX3041BB
7-11
Black
1
1
bunzlsafety.com.au | 17
1
18 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
GENERAL HANDLING
EN388:2016
EN388:2016
4121A MECHANICAL
4121A MECHANICAL
EN407:2004
Complies to Australian Standard AS/NZS 2161.2:2005 AS/NZS 2161.3:2005
X1XXXX HEAT
Complies to Australian Standard AS/NZS 2161.2:2020 AS/NZS 2161.3:2020 AS/NZS 2161.4:1999
MAXIM EVOLUTION - CUT A FEATURES AND BENEFITS • Lightweight liner fits like a second skin • Eco-friendly Ingenia ™ performance yarn is highly durable & moisture wicking to keep hands dry • Touchscreen compatible • Low-particulate shedding, great for contamination and sensitive applications • Seamless, ventilated liner and PFT ™ coating provides 360° breathability • Provides good wet grip & excellent dry & oil grip • Excellent durability against abrasion
MAXIM DEXTEC - CUT A FEATURES AND BENEFITS • Fine gauge synthetic liner offers a snug fit and feels like a second skin • Low particulate shedding, great for contamination sensitive applications • Soft, 360 ° breathable, flexible coating offers all day comfort • Excellent grip in dry, wet and oily conditions • High abrasion resistance
CARTON QTY 12 pairs
CARTON QTY 144 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
NIMXDTNFTGY
12
NIMXEVOLUGY
12
XS-3XL
Grey
XS-2XL
Grey
EN388:2016
EN388:2016
4131A MECHANICAL EN407:2004
3131X MECHANICAL
Complies to Australian Standard AS/NZS 2161.2:2005 AS/NZS 2161.3:2005
HYDROPELLANT TECHNOLOGY
NEW FOAM TECHNOLOGY
X1XXXX
Complies to Australian Standard AS/NZS 2161.2:2020 AS/NZS 2161.3:2020 AS/NZS 2161.4:1999
MAXIM COOL - CUT A FEATURES AND BENEFITS
MAXIM GRIPX FEATURES AND BENEFITS • 15 gauge nylon/spandex knitted liner • Soft, flexible HPT ™ (Hydropellent Technology) coating provides highest level of wet, oily and dry grip • Anti-wet liner wicks liquids from back of hand for 360 ° breathability • Encapsulated air pockets mitigate effects of light vibrations • Approved to AS/NZS 2161.3:2005
• 15 gauge nylon/spandex knitted liner fits like a second skin • Seamless, ventilated liner and NFT™ coating provides 360° breathability, keeping hands cool • Excellent durability against abrasion • Ergonomic design allows minimum hand fatigue, increasing productivity and comfort • NFT™ coating provides superior grip in oily, dry and wet conditions
PACK QTY MOQ
CARTON QTY 144 pairs 144 pairs
PACK QTY MOQ
CARTON QTY 144 pairs 144 pairs
CODE
COLOUR
CODE
COLOUR
1
BNGRPXHPTBK BNGRPXHPTFY
12 12
NIMXCLNFTGY NIMXCLNFTFY
12 12
Black
Grey
Fluro Yellow
Fluro Yellow
bunzlsafety.com.au | 19
GENERAL HANDLING
EN388:2016
EN388:2016
3121X MECHANICAL
2131X MECHANICAL
Complies to Australian Standard AS/NZS 2161.2:2005 AS/NZS 2161.3:2005
Complies to Australian Standard AS/NZS 2161.2:2005 AS/NZS 2161.3:2005
MAXIM MULTI LITE - PU FEATURES AND BENEFITS • 18 gauge skin tight athletic grade nylon shell acts as a second skin to provide tactile sensitivity • Lightweight PU coating provides 360 ° breathability • PU coating concels dirt & grime • Provides excellent wet, dry and light oil grip • PU coating conceals dirt and grime
MAXIM MULTI FLEX - LATEX FEATURES AND BENEFITS • 15 gauge nylon/spandex knitted liner feels like a second skin • Ultra-light latex coated palm provides excellent grip in both wet and dry environments • Elasticised wrist provides a secure fit
PACK QTY MOQ
CARTON QTY 144 pairs
PACK QTY MOQ
CARTON QTY 144 pairs
CODE
COLOUR
CODE
COLOUR
NIMLTLITEBL
12
NIMLTFLEXRR
12
Blue
Red
EN388
EN388
4132
4132
TAKT - NITRILE MICRO FOAM FEATURES AND BENEFITS
TAKT - PU FEATURES AND BENEFITS • 13 gauge seamless nylon shell for enhanced dexterity • PU coat for excellent wet and dry grip • Coating provides vibration absorption for added comfort • Dark colouring to hide dirt
• 13 gauge seamless nylon shell for enhanced dexterity • Micro foam nitrile coat for excellent wet and dry grip • Coating provides vibration absorption for added comfort
PACK QTY MOQ
CARTON QTY 144 pairs 144 pairs
CODE
COLOUR
PACK QTY MOQ
CARTON QTY 144 pairs
1
CODE
COLOUR
FRFNITGLVBK FRFNITGLVGW
12 12
Black
FRNYLONPUBK
12
Black
Grey / White
20 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
GENERAL HANDLING
3142
4121
GLAZR GLASS GRIPPER - LATEX FEATURES AND BENEFITS
SPLENDOR - LATEX COATED FEATURES AND BENEFITS • Seamless polyester cotton liner • Roughened latex coating for excellent wet and dry grip • Ergonomic design, snug fitting • Excellent abrasion and puncture resistance • Washable at 42 ° C
• 100% cotton jersey lining for comfort • Natural latex coat for enhanced grip • 100% cotton knit wrist • Knuckle coated open back • Washable at 42°C for extended use • Economy option
PACK QTY MOQ
CARTON QTY 144 pairs
PACK QTY MOQ
CARTON QTY 144 pairs
CODE
COLOUR
CODE
COLOUR
FRGLSGRPRYY
Yellow
12
NISPLENDRGB
12
Grey / Blue
EN 388 EN 388: 2016
EN 388 EN 388:2016
4131A
3121A
EN407
EN 388 EN 388:2003
X1XXXX
4121
EN 1149
HYFLEX 11-818 ULTRA LITE NITRILE FOAM FEATURES AND BENEFITS • Soft, snug 18 gauge nylon and spandex liner • Ultrathin FORTIX™ nitrile patent pending foam coating • ZONZ™ Comfort Fit Technology • Breathable nitrile patent pending foam • Clean & skin friendly
HYLFLEX 11-842 NITRILE RECYCLED FEATURES AND BENEFITS • Sustainable design: Made with 90% recycled nylon yarn • Excellent durability and abrasion resistance • Certified skin friendly • Touchscreen compatible • Part of the Ansell Earth sustainably made range
PACK QTY MOQ
CARTON QTY 144 pairs
PACK QTY MOQ
CARTON QTY 144 pairs
1
CODE
COLOUR
CODE
COLOUR
11-818
Blue
12
AN1184200GB
Green / Black
12
bunzlsafety.com.au | 21
GENERAL HANDLING
EN 388 EN 388: 2016
EN 388 EN 388: 2016
3131A
4131A
EN 388 EN 388: 2003
3131
HYFLEX 11-801 FOAM NITRILE FEATURES AND BENEFITS • Suited for slightly oily or dirty environments • Foam coating provides breathability • Independently certified as skin friendly by the Oeko-Tex® system
HYFLEX 11-840 NITRILE FEATURES AND BENEFITS • Abrasion resistance technology delivery 2x more grip • Heat protection up to 100°C • ERGOFORM™ Ergonomic Design: Reduced strain, better ergonomics
PACK QTY MOQ
CARTON QTY 144 pairs
PACK QTY MOQ
CARTON QTY 12 pairs
CODE
COLOUR
CODE
COLOUR
AN1180100BB
Black
12
AN1184000BB
Black
12
EN 388 EN 388: 2016
4X42B
HYFLEX 11-939 OIL REPELLENT - CUT B FEATURES AND BENEFITS • EN ISO B/ANSI A2 cut protection • Reinforced thumb crotch • Ultra-light 18 gauge design and superb dexterity • Enhanced grip • Comfort fit knitting and stitch design reduces hand fatigue
PACK QTY MOQ
CARTON QTY 144 pairs
1
CODE
COLOUR
AN0011939BB
Black
12
22 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
1
bunzlsafety.com.au | 23
MECHANICS / ANTI IMPACT & VIBRATION RESISTANT
2111
2111
ISA MECHANICS (FORMERLY 'THE ORIGINAL') FEATURES AND BENEFITS • 0.8 mm premium breathable synthetic leather palm • Neoprene padded palm for vibration reduction and comfort • Perforated forchettes for increased coolness and air flow • Four way stretch spandex for full movement • Grip tab closure for increased comfort and improved fit
ISA MECHANICS FINGERLESS FEATURES AND BENEFITS • 0.8 mm premium breathable synthetic leather palm • Neoprene padded palm for vibration reduction and comfort • Perforated forchettes for increased coolness and air flow • Four way stretch spandex for full movement • Grip tab closure for increased comfort and improved fit • Fingerless for ultimate dexterity
PACK QTY MOQ
CARTON QTY 72 pairs 72 pairs
CARTON QTY 72 pairs
CODE
COLOUR
CODE
SIZE
COLOUR PACK QTY MOQ
COORIGINLBB
12 12
COORGNLNFBB M-2XL
12
Black
Black
COORGNLHVS-2XL
HV Yellow
2111
2132
3 PACK AVAILABLE
COMES IN GREY/BLUE/RED
VERSADEX FEATURES AND BENEFITS
GOLDEN EAGLE - LUXURY DEER FEATURES AND BENEFITS • Curved fingers with perforated fourchettes for a snug fit and air circulation and air circulation • Black neoprene knuckle protection • Grip closure for improved fit and comfort • High abrasion resistance • Wing thumb allows better open hand pulling
• Slim cut design for even light duty, sensitive work • PU impregnated material on palm offers great tactility • Thumb crotch for extreme durability • Palm and knuckle padding for comfort, impact protection and anti vibration • Stretch spandex with fourchettes for great fit and breathability • Slip on/off cuff design • Reinforced pull tab for easy donning
CARTON QTY 72 pairs 72 pairs 24 pairs
CARTON QTY 72 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
COVDEXMEKGY S-2XL COVDEXMEKBK S-2XL
12 12
COGLDEAGLYB S-2XL
6
Grey Black
Yellow / Black
1
COVDEXPK3GL S-2XL Grey / Blue / Red
4
24 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
MECHANICS / ANTI IMPACT & VIBRATION RESISTANT
EN 388: 2016
EN 388: 2016
3X41DP
3X42D
BLACKWATER - CUT D IMPACT FEATURES AND BENEFITS • Stretch spandex shell with fourchettes provides breathability, easy movement and a comfortable fit • TPR impact finger / knuckle strap plus back guard provides extra protection • Neoprene wrist with impact resistance for extra protection • Synthetic leather palm with Cut 5 palm resistance according to EN388:2003 • Thumb crotch reinforcement provides extreme durability • Reinforced textured palm pads and fingertips for grip and durability • Adjustable closure for a perfect fit
JABIRU - CUT D IMPACT FEATURES AND BENEFITS • Reflective material for high visibility conditions
• Impact finger / knuckle strap / back guard provide extra protection • Stretch Spandex material provides breathability and a comfortable fit • Neoprene cuff - snug fit, easy to remove • EN388 Cut D level back liner provides 100% cut resistance coverage • Reinforced textured palm pads and fingertips for grip / durability • ID badge and pull tab provides security and easy donning
CARTON QTY 72 pairs
CARTON QTY 72 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
COBLKMECHFL
6
COJABMECHBG M-2XL Black / Orange
6
M-2XL Grey / Orange
2132
ANTI-VIBRATION FEATURES AND BENEFITS • ‘A’ grade premium cowhide leather • Cut Level 3 protection
• Neoprene cuff with grip tab closure for comfort and protection • 2.75mm full gel padded palm and fingers for vibration absorption and comfort
CARTON QTY 72 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
COANTIVIBBB
6
M-XL
Blue / White
1
bunzlsafety.com.au | 25
MECHANICS / ANTI IMPACT & VIBRATION RESISTANT
4X33EP
4X33E
RIGGER - CUT E FEATURES AND BENEFITS • 360° Cut Level E resistance • Kevlar ® stitching for strenth and heat resistance • Shirred elastic wrist for a secure fit • Adjustable grip tab for a secure, slip-free fit • Extended thumb reinforcement provides extreme durability • Goatskin leather for a soft, luxurious feel, movement and extra comfort • Winged thumb (no seam between palm and thumb) for increased flexibility and comfort
RIGGER - CUT E IMPACT FEATURES AND BENEFITS • 360° Cut Level E • Flexible TPR (Thermoplastic rubber) finger & knuckle impact protection • Goatskin leather for a soft, luxurious feel, movement and extra comfort • Kevlar ® thread stitching for strenth and heat resistance • Winged thumb for increased flexibility and comfort • Shirred elastic wrist and grip tab for a secure fit
PACK QTY MOQ
CARTON QTY 72 pairs
CARTON QTY 72 pairs
CODE
SIZE
COLOUR
CODE
SIZE
COLOUR PACK QTY MOQ
CWCUTPRIGWW M-3XL White / Black / Green
6
CWCUTRIGEWW M-3XL
White
6
EN 388 EN 388
2111
MOORDITJ MAAR MECHANICS FEATURES AND BENEFITS • 0.8 mm premium breathable synthetic leather palm • Neoprene padded palm for vibration reduction and comfort • Perforated forchettes for increased coolness and air flow • Four way stretch spandex for full movement • Grip tab closure for increased comfort and improved fit
1
CARTON QTY 72 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
NMOORD202BB S-2XL
Black
6
26 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
MECHANICS / ANTI IMPACT & VIBRATION RESISTANT
EN 388 EN 388: 2016
EN 388 EN 388
4X43EP
3X43FP
EN407
X1XXXX
RINGERS R169 MEDIUM-DUTY IMPACT & CUT RESISTANT FEATURES AND BENEFITS • Excellent TPR impact protection to knuckles, thumb & full length of fingers • Hook and loop TPR pull tab closure, for a more secure fit • Seamless index finger design further protects areas prone to wear and tear • Superior Level F cut resistance and ANSI/ISEA 138 Level 2 impact protection • Premium synthetic leather palm enhances durability
RINGERS R065 CUT RESISTANT IMPACT FEATURES AND BENEFITS • Breathable knit shell offers cut resistance • TPR impact protection and half-dipped nitrile palm • High-visibility design, with touchscreen-compatible thumb tips, index and middle fingers • Sandy finish palm for superior grip in wet & dry environments
PACK QTY MOQ
CARTON QTY 72 pairs
CARTON QTY 50 pairs
CODE
SIZE
COLOUR
CODE
SIZE
COLOUR PACK QTY MOQ
NN000065T
8-13
Black / Yellow / Red
12
NN000R16900
8-13
Yellow / Red
5
EN 388 EN 388:2016
EN 388 EN 388: 2016
2121X
4131AP
EN407
X1XXXX
Cat. II
RINGERS R840 LIGHT DUTY IMPACT RESISTANT FEATURES AND BENEFITS • Excellent TPR impact protection to knuckles, thumb & full length of fingers • Thumb crotch reinforcement for improved durability • Enhanced ergonomic design
RINGERS TURBO R133 AUTOMOTIVE FEATURES AND BENEFITS • Hook and loop TPR pull tab closure, for a more secure fit • Touchscreen compatible thumb tips, index and middle fingers • Excellent comfort and flexibility • Excellent grip and durability from synthetic leather split-palm construction and wraparound index finger design
• Comfort fit technology • Guaranteed skin friendly
1
CARTON QTY 48 pairs
CARTON QTY 120 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
8-13
Black
RI0000133BB
5
AN000R840
6-11
Black / Yellow 4
bunzlsafety.com.au | 27
COLD RESISTANT
EN388:2016
3231X MECHANICAL EN511:2006
3X42C
02X
X2X COLD
Complies to Australian Standard AS/NZS 2161.2:2005 AS/NZS 2161.3:2005
COLD FIGHTER 3/4 DIPPED INSULATED - CUT C FEATURES AND BENEFITS • 3/4 dip HPT foam coating for assured water and oil repellent grip • HPT foam coating ensures a soft, spongy grip with anti-vibration properties and flexibility to function in low temperatures • Terry lining provides warmth and comfort for temperatures down to -50°C • Sanitised with Actifresh® to kill bacteria and promote freshness • Dyneema Cut Level C protection • Contact Cold Level 2 protection
CELSIUS ICE - INSULATED FEATURES AND BENEFITS • Nylon and acrylic double knitted liner provides comfort and high dexterity like a second skin • HPT ™ coated palm & fingertips remain soft and flexible in temperatures as low as -20°C • Soft, durable HPT ™ (Hydropellent) coating provides flexibility and repels liquid ensuring an excellent wet, dry and oil grip
PACK QTY MOQ
CARTON QTY 72 pairs 72 pairs
CODE
COLOUR
CARTON QTY 72 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
NIICEFRZRBK NIICEFRZRFY
6 6
Black
Fluro Yellow
FRCOLDFC5BJ
6
M-2XL
Black / Green
2132
3142
CHILLAGOE WINTER INSULATED - IMPACT FEATURES AND BENEFITS
WINTER LUX - DEER SKIN INSULATED FEATURES AND BENEFITS • Curved fingers with perforated fourchettes for a snug fit and air circulation • Black neoprene knuckle bar protection • Grip tab closure for improved fit and comfort • High abrasion resistance • Wing thumb allows better open hand pulling • 3M ™ Thinsulate ™ lining for warmth
• Synthetic leather palm with ultra grip palm for better grip and durability • Impact finger / knuckle strap / back guard provide extra protection • Water repellent fabric back and outside thumb • Neoprene cuff - snug fit, easy to remove • Water barrier insert keeps hands dry • Extra thumb reinforcement provides more protection • 3M ™ Thinsulate ™ C100 with fleece insulation keeps you warm • ID badge and pull tab provides security and easy donning
1
CARTON QTY 72 pairs
CARTON QTY 72 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
COGLDEGLWYB S-2XL
Yellow / Black
6
COCHLMECHBB M-2XL
6
Black
28 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
COLD RESISTANT
1
bunzlsafety.com.au | 29
HEAT RESISTANT & WELDING
3144 EN 407
414X4X
BLACK & GOLD WELDER GAUNTLET - 40CM
FEATURES AND BENEFITS • 40cm black cowsplit leather
SAFEGUARD THERMAL - CUT E FEATURES AND BENEFITS • Cut Level E protection • Aramid fibres contact heat: Level 2 (250°C <15s) • Puncture Level 4 protection • Seamless 10 gauge shell for heavy duty protection and glass fibre blend shell • Crinkle cut latex coat for assured grip and flexibility • Excellent abrasion resistance for longevity
• Gold half welts • Self hemmed • Full jersey sock lining • Resistance to burning rated to Level 4
• Resistance to contact heat rated to Level 1 • Resistance to convective heat rated to Level 4 • Resistance to small drips of molten metal rated to Level 4 • Kevlar ® stitched
CARTON QTY 120 pairs
CARTON QTY 60 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CODE
SIZE
COLOUR PACK QTY MOQ
FRWELDDRBGB One size fits all Black / Gold
FRSAFEGRDYB M-2XL
Beige / Blue
12
12
3144 EN 407
3144 EN 407
414X4X
414X4X
BLUE WELDER GAUNTLET - 40CM REINFORCED PALM
WELDER GAUNTLET - 40CM FEATURES AND BENEFITS • 40cm red & blue cowsplit leather
FEATURES AND BENEFITS • 40cm blue cowsplit leather
• Gold half welts • Self hemmed • Full jersey sock lining • Kevlar ® stitched
• Gold half welts • Self hemmed • Full jersey sock lining • Reinforced palm, fingers and thumb for high wear areas • Kevlar ® stitched
CARTON QTY 60 pairs 60 pairs
CODE
SIZE
COLOUR PACK QTY MOQ
CARTON QTY 60 pairs
1
CODE
SIZE
COLOUR PACK QTY MOQ
FRWELDGLVBL FRWELDGLVRR
12 12
One size fits all One size fits all
Blue Red
FRWELDGRPBL One size fits all Blue / Orange
12
30 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL2
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44Made with FlippingBook Digital Proposal Creator