K-Line Ag SG60T CropCadet Operator Safety Manual V1.4 (E)

S A F E T Y

TRANSPORTING/ROADING

1. Wheel rams must be fully extended with travel-stop holders on centre wheel rams for transport. 2. Ensure towing unit weight is the same as or greater than the towed unit.

3. Lockout tractor drawbar swing mechanism. 4. Ensure tyres are correctly inflated. Pg 20. 5. Check wheel nut tension *NB - Pg 20 for wheel nut re-tensioning times 4 sequence. 6. Ensure all safety locks are engaged. 7. Ensure safety chains are attached to towing unit.

8. Tractor drawbar must be in fixed position, not swinging. 9. Ensure tractor brakes are latched together at all times. 10. Plan your route to avoid heavy traffic. 11. Observe bridge load ratings.

TIP OVER HAZARD this is an unbraked implement. Use extreme caution when turning, and on steep terrain. Maximum towing speed is 20mph (32km/hr). DO NOT EXCEED AT ANY TIME. NEVER transport machine on public roads without complying with Federal and State laws and local regulations governing the safe movement of farm machinery. Figure 22

Figure 23

Figure 22

25

SG60 SEEDER CROP CADET

OPERATOR & SAFETY MANUAL

Made with FlippingBook - Online Brochure Maker