K-Line Ag SG60T CropCadet Operator Safety Manual V1.4 (E)

AFTER DELIVERY

When you receive themachine, make sure that it has not been damaged during transportation and that no parts are missing. Only by giving us immediate advice can the necessary replacement parts be obtained. Ensure that all components are correctly adjusted.

GENUINE PARTS

K-Line spare parts and accessories have been specifically designed and developed for the machines produced. We would call your attention to the fact that non-genuine parts and accessories are not recommended by K-Line. The use of such replacement parts frees K-Line from all liability and makes the warranty void. The installation and/or use of non-genuine parts may, because of technical characteristics of construction, modify or influence the performance of the machine negatively.

IDENTIFYING THE MACHINE FOR REQUESTING SPARE PARTS

The machine is identified by the serial number on the metal plate on the machine. When requesting spare parts or maintenance service, please indicate the model and number of your equipment to ensure prompt and efficient attention.

TRACTOR REQUIREMENTS

6-8 Horsepower x no. of tines in machine 4.5 - 6 Kilowatts x no. of tines on machine Tractor weight must be same as or greater than the towed unit.

Hydraulic valves

2 x double spool (plus qty required for seed bin)

Hydraulic operating pressure

2800 PSI approximately

DEFINITIONS USED IN THIS MANUAL

Figure 2

7

SG60 SEEDER CROP CADET

OPERATOR & SAFETY MANUAL

Made with FlippingBook - Online Brochure Maker