Bunzl Safety - Load Restraints Catalogue

LOAD RESTRAINT

BUNZL SAFETY'S RANGE OF TRANSPORT EQUIPMENT HAS BEEN DEVELOPED WITH THE PROFESSIONAL DRIVER IN MIND. Our high quality, functional range is manufactured and tested to strict Quality Assurance guidelines as well as the required Australian Standards. From loadbinders and transport chain kits, to winches and ratchet tie downs, there is sure to be a product within our range to suit your vehicle and fleet requirements.

TRANSPORT RESTRAINT

TRANSPORT RESTRAINT PRODUCT INFORMATION

Direction of travel

Restraint against sideways movement = 50% of load

SAFE LOAD RESTRAINT GUIDE

Australian Standards state that lashings must be replaced if they are weakened by 10% or more of their original strength. Therefore all restraint equipment must be inspected regularly and if the components are cracked, broken or worn they must not be used for restraining loads.

Direction of travel

Restraint against sideways movement = 50% of load

Restraint against forward movement = 80% of load

Restraint against forward movement = 80% of load

Restraint against sideways movement = 50% of load

Restraint against rearward movement = 50% of load

Restraint against sideways movement = 50% of load

Restraint against rearward movement = 50% of load

Minimum Horizontal Restraint

Minimum Horizontal Restraint





D







Ratchet Assemblies

D

R R>D

Push up to operate type

15° 

Ratchet Assemblies

Chain over load corners

R R>D

30° Push up to operate type

15°

Dunnage

Tie-Down angles for effective lashing of loads

Push down to operate Beaver type (Less back strain involved)

Divided crowned load

Chain over load corners



Dunnage

30°

Dunnage

Loose lengths between stanchions

60°

30°

Empty pallets used as dunnage

Tie-Down angles for effective lashing of loads

Push down to operate Beaver type (Less back strain involved)

Divided crowned load



Clip-on Winch



Dunnage

30°

Belly lashing on rounded loads

Slide-on Winch

Loose lengths between stanchions

60°

Empty pallets used as dunnage

Correct load lashing



Clip-on Winch

Belly lashing on rounded loads

Slide-on Winch

Correct load lashing

4 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1 3

Made with FlippingBook flipbook maker