F I E L D O P E R AT I O N FRONT DISC GANG LATERAL POSITIONING CONT
Slide adjuster linkage
ADJUSTMENT PROCEDURE Loosen main retaining bolts on slide mechanism • Turn slide adjusting linkage to adjust to right or left • Lock slide adjusting linkage and tighten main retaining bolts (380ft lb / 500Nm tension)
Slide Bolts
Left
Right
Figure 28
Height adjustment setting
Fore & aft adjustment
SIDE COULTER ADJUSTMENT Series of holes are provided for disc height and front to back positions for optimum furrow filling.
FOR EXCESSIVE TRASH CONDITIONS • Move coulter forward and angle outwards • Raise coulter. • Move coulter to the outside of
supporting angle for more clearance.
Angle adjustment
Figure 29
28
2945D - 2965D 3PL SPEEDTILLER
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker