K-Line Ag Flexi-Mulch 2320D Operator Safety Manual

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

MODELS: 2317D,2320D,2325D,2330D,2335D & 2340D

74 Young Rd | PO Box 340, Cowra, NSW 2794 | AUS

2300D Fleximulch op book.indb 1

20/07/2022 12:30:52 PM

Would you like a copy of this manual emailed to you? Send your request to marketing@k-line.net.au or scan here:

2300D Fleximulch op book.indb 2

20/07/2022 12:30:52 PM

Dear Customer Thank you for purchasing a 2300D Series Fleximulch.

We would like to assure you that you have made a good choice, and will be able to rely on this high quality piece of equipment. We ask you to follow the user’s instructions closely as this will ensure that you experience the benefits of using the machine without experiencing the unnecessary down time caused by misuse. When you receive the machine, make sure that it has not been damaged during transportation and that no parts are missing. Contact your dealer immediately if any parts are missing. Ensure that all components are correctly adjusted. Please read, fill, sign and submit the Warranty Registration Document (including Safety Acknowledgement) that was provided with your Product. Upon submission of the Warranty Registration Document, your Dealer will provide you with a copy, which should be kept in a safe place for easy access in the future. Before operating, PLEASE TAKE THE TIME TO LEARN the process of operation. Do not take the unit for granted; ease into becoming familiar with your new equipment. The operator should be a responsible adult familiar with farm machinery and trained for this purpose. Do NOT allow persons to operate or assemble the unit until they have read this manual and understand how to use this machine and observe the safety precautions. Never exceed the limits of this machine. If its ability to do a job, or to do so safely is in question - DO NOT TRY IT. DO NOT attempt to operate this equipment under the influence of drugs or alcohol. Remember - Your best assurance against accidents is a careful and responsible operator. If you have any questions not answered in this manual or require additional copies or the manual is damaged, please contact your dealer or be free to phone us on our free call number:

AUS - 1800 194 131

The team here at K-Line Agriculture trust you enjoy a good season and prove the benefits of owning and operating a quality machine that is built to perform. Signed:

David Larsen National Operations & Development Manager, K-Line.

2300D Fleximulch op book.indb 3

20/07/2022 12:30:52 PM

OP & SAFETY MANUAL

Table of Contents

CUSTOMER LETTER LEGAL DISCLAIMER ��1.1 INTRODUCTION After Delivery ��1.1 Genuine Parts ��1.1 Identifying The Machine For Requesting Spare Parts ��1.1 SPECIFICATIONS ��1.2 GENERAL INFORMATION Tractor Requirements ��2.1 Definitions Used In This Manual ��2.1 Disc Arm Identification ��2.1 Bolt Tension ��2.1 SAFETY INFORMATION R isk M anagement �� 3.1 Identifying Hazards ��3.1 Risk Assessment ��3.1 Risk Control ��3.1 Monitor and Review Control Measures ��3.1 Risk Assessment Matrix ��3.2 Risk Assessment Table ��3.3 I mportant S afety N otice (M ust R ead ) ��3.4 Your Safety & The Safety Of Others Is Important ��3.5 Safety Alert Symbol ��3.5 Signal Words ��3.5 S afety D ecals �� 3.6 Safety Decal Placement ��3.6 Safety Decal Part Numbers ��3.7 Decals ��3.8 Logo Stickers ��3.11 Safety Sign Care ��3.12 H ydraulic O peration & S afety �� 3.13 Hydraulic System Failure ��3.13 Hydraulic Operation ��3.14

TABLE OF CONTENTS CONTINUED ONTO NEXT PAGE....

2300D Fleximulch op book.indb 4

20/07/2022 12:30:52 PM

Hydraulic Hose Hook Up ��3.14 Priming Hydraulic System ��3.14 Hydraulic Colour Codes ��3.15 O perating I nstructions ��3.16 Hooking / Unhooking To Tractor ��3.16 FIELD OPERATION Speed Range ��4.1 fleximulch S tart U p T ips �� 4.2 Alignment Of Discs From Disc Hub Orientation ��4.3 Tracking Adjustments ��4.4 Front Disc Gang Lateral Positioning Standard Factory Setting ��4.5 Lateral Front Disc Gang Positioning ��4.6 Adjustment Procedure ��4.7 U seful hints �� 4.8 Blocking in Excessive Trash ��4.8 Clogging in Wet Soils ��4.8 Ram Stop Combinations ��4.8 MAINTENANCE Maintenance & Safety ��5.1 After Delivery Check List ��5.2 Daily Maintenance Check for Optimum Performance ��5.3 B olt T orque T ables �� 5.4 Metric Bolt Torque Table ��5.4 Imperial Bolt Torque Table ��5.5 Torque Tightening Sequence. ��5.6 Wheel Bearings ��5.7 Lubrication of Purgable Heavy Duty Rear Roller Bearings ��5.7 EXPLODED VIEWS Fleximulch Jump Arm Assembly ��6.2 Fleximulch Hub Assembly ��6.3 Side Coulter ��6.4 Standard (50mm Pin) Roller Bearing ��6.5 LIST OF IMAGES TESTIMONIAL PERMISSION FORM

2300D Fleximulch op book.indb 5

20/07/2022 12:30:52 PM

THIS PAGE IS LEFT INTENTIONALLY BLANK

2300D Fleximulch op book.indb 6

20/07/2022 12:30:52 PM

LEGAL DISCLAIMER LAST UPDATED: 19/07/22

The information contained in the K-Line Industries Pty Ltd (also trading as “K-Line Ag” and “K-Line Agriculture”) manual is for general information purposes only. K-Line Industries Pty Ltd assumes no responsibility for errors or omissions in the contents of the book. In no event shall K-Line Industries Pty Ltd be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence with the use of the Service or the contents of the Service. K-Line Industries Pty Ltd reserves the right to make additions, deletions, or modification to the contents of this manual at any time without prior notice. AFTER DELIVERY When you receive the machine make sure that it has not been damaged during transportation and that no parts are missing. Only by giving us immediate advice can the necessary replacement parts be obtained. Ensure that all components are correctly adjusted. GENUINE PARTS K-Line spare parts and accessories have been specifically designed and developed for the machines produced. We would call your attention to the fact that non-genuine parts and accessories are not recommended by K-Line. The use of such replacement parts frees K-Line from all liability and makes the warranty void. The installation and/or use of non-genuine parts may, because of technical characteristics of construction, modify or influence the performance of the machine negatively. IDENTIFYING THE MACHINE FOR REQUESTING SPARE PARTS The machine is identified by the serial number on the metal plate on the machine. When requesting spare parts or maintenance service, please indicate the model and number of your equipment to ensure prompt and efficient attention.

1.1 1.1

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 1

20/07/2022 12:30:52 PM

Specifications

SPECIFICATIONS

MODEL SPECIFICATIONS

2317D

2320D

2325D

2330D

2335D

2340D

OPERATING WIDTH APPROX. 1.75M (5.7FT) 2.0M (6.6FT) 2.5M (8.2FT)

3.0M (9.8FT) 3.5M 11.5FT)

4.0M (13.1FT)

NUMBER OF DISCS ADJUSTABLE DISC POSITIONING STANDARD DISC SIZE

YES

22”

FLEXIMULCH WEIGHT WITH STANDARD ROLLERS

1150KG (8718LB)

1350KG (2976LB)

1550KG (3420LB)

1850KG (4080LB)

2050KG (4520LB)

2350KG (16997LB)

TRANSPORT WIDTH

2.0M (6.5FT) 2.3M (7.5FT)

2.8M (9.2FT) 3.3M (10.9FT) 3.8M (12.5FT) 4.3M (14.1FT)

TRANSPORT LENGTH

2.4M (7.8FT)

TRANSPORT HEIGHT

1.2M (3.9FT)

TRACTOR POWER RANGE

60-80HP 70-90HP 90-120HP 100-140HP 130-150HP 140-160HP TRACTOR HYDRAULIC REQUIREMENTS

HYDRAULIC REMOTES HYDRAULIC PRESSURE

- -

HYDRAULIC FLOW CAPACITY

HITCH TYPE

3PL CAT-2

3PL CAT-3

*3PL - 3 Point Linkage

Figure : 1.1 Model Specifications

1.2

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 2

20/07/2022 12:30:53 PM

General Information

GENERAL INFORMATION TRACTOR REQUIREMENTS 10-14 Horsepower x width of machine in feet. 25-35 Kilowatt x meter width of machine in meters. Tractor weight must be the same as or greater than the towed unit. Hydraulic valves: Standard No hydraulics required With optional hydraulic roller adjustment 1 x double spool Hydraulic operating pressure: 2800 PSI

DEFINITIONS USED IN THIS MANUAL

DISC ARM IDENTIFICATION VIEW FROM REAR OF MACHINE FRONT ARM REAR ARM Figure : 2.1 Tractor Orientation.

BOLT TENSION Top plate bolt tension Min:75ft-lb / 100N-m Max:100ft-lb / 135N-m Disc bolt tension 450Nm (+/-50Nm)

Figure : 2.3 Bolt Tension.

Figure : 2.2 Disc Arm Identification.

2.1 2.1

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 1

20/07/2022 12:30:53 PM

THIS PAGE IS LEFT INTENTIONALLY BLANK

2300D Fleximulch op book.indb 2

20/07/2022 12:30:53 PM

Safety Information SAFETY INFORMATION RISK MANAGEMENT

Risk management is the process of finding out what may cause an injury, deciding what may happen as a result, and doing something about it. The steps of risk management are: • Identify the hazards to workplace health and safety arising from work activities. • Assess the risks.

• Determine and implement control measures to reduce risk. • Monitor and review the effectiveness of the control measures. IDENTIFYING HAZARDS

Prior to commencing work, all hazards related to the work tasks should be identified. The selection of the appropriate work procedure(s) will depend on the type of work procedure(s) and hazards involved. Regular safety inspections will also identify hazards and ensure that control measures are in place. RISK ASSESSMENT Risk assessment allows appropriate control measures to be developed. Once hazards have been identified, they should be assessed in terms of their potential to do harm. To assess risk, consideration should be given to probability and consequences. 3.SAFETY INFORMATION - Risk Assessment Matrtix. RISK CONTROL Risk control is the process of eliminating or reducing risk factors. Control measures should be chosen and implemented to eliminate or reduce risk as far as practicable. When deciding on the most appropriate measures to use, practicality and acceptance of the control measures should be considered. Safe Working Procedures will be developed for all high – medium risk hazards. MONITOR AND REVIEW CONTROL MEASURES The risk identification, assessment and control process requires regular monitoring to ensure the implemented control measures perform as originally intended and continue to prevent or adequately control the risk of injury or incident. Control measures should also be checked carefully to ensure that new hazards are not created, directly or indirectly, by the original control measures.

3.1 3.1

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 1

20/07/2022 12:30:53 PM

Safety Information

RISK ASSESSMENT MATRIX

AT ALL TIMES COMPLY WITH RECOMMENDATIONS AND REQUIREMENTS OF THE MANU- FACTURER AND THE ENVIRONMENTAL PROTECTION AUTHORITY.

ALL HAZARDS & RISKS ARE CONTROLLED THROUGH SAFE WORKING PROCEDURES & ADEQUATE SIGNAGE.

IT IS IMPORTANT THAT THE OPERATOR CONDUCT THEIR OWN RISK ASSESSMENT FOR OPERATING THE MACHINE.

How likely is it to be that bad

How severly could it hurt someone? or How ill could it make someone? kill or cause permanent disability or ill health long term illness or serious injury medical attention and several days off work

Very unlikely could happen but probably never will

Very likely could happen anytime

Likely could happen anytime

Unlikely could happen but very rarely

first aid needed

The numbers show you how important it is to do something. 1: top priority: Do something immediately. 6: low priority: Do something when possible.

Figure : 3.1 Risk Assessment Matrix.

3.2

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 2

20/07/2022 12:30:53 PM

Safety Information

RISK ASSESSMENT TABLE

RISKS ASSOCIATED WITH YOUR MACHINE INCLUDE BUT ARE NOT LIMITED TO, THE RISKS IDENTIFIED IN THE FOLLOWING TABLE.

RISK SCORE

REVISED RISK SCORE

CODE

HAZARDS

CONTROL

ADJUSTING & CLEANING MUST ONLY BE DONE WHEN MACHINE IS LOWERED OR IN TRANSPORT POSITION AND ONLY AFTER ALL CHAINS AND BOLTS HAVE BEEN CHECKED FOR TIGHTNESS & WEAR IN THE LOWER POSITION. ENSURE JACK IS INSTALLED CORRECTLY & JACK RECEIVES REGULAR MAINTENANCE. KEEP FEET AND BODY CLEAR WHEN OPERATING. ENSURE NO PERSONNEL ARE BETWEEN TRACTOR & IMPLEMENT WHEN HITCHING/ UNHITCHING TRACTOR TO IMPLEMENT. MACHINE MUST BE LOWERED INTO WORKING POSITION USING SUITABLE LIFTING EQUIPMENT BEFORE PRIMING IS EFFECTED. PRIME BY SLIGHTLY LOOSENING FITTING/S INTO CYLINDERS AND OPERATING TRACTOR HYDRAULICS TO ACHIEVE FULL UNINTERRUPTED TRAVEL OF CYLINDER SEVERAL TIMES TO BLEED AIR. THEN RE-TIGHTEN HYDRAULIC FITTINGS. ENSURE JACK(S) ARE CORRECTLY POSITIONED AND TAKING WEIGHT BEFORE REMOVING DRAWBAR PIN. STICKERS WARN OPERATOR. MAINTAIN REGULAR CHECKS ON HYDRAULIC SYSTEM FOR WEAR & CHECK ALL FITTINGS ARE SECURE. ENSURE TRACTOR OIL FLOW IS LIMITED TO REDUCE FALLING SPEED OR DO NOT INTERRUPT MACHINE FALLING UNTIL MACHINE IS FULLY IN LOWERED POSITION. SAFETY PINS MUST BE PUT IN PLACE AS SOON AS MACHINE IS PUT IN TRANSPORT POSITION AND IF TRAVELLING ON PUBLIC ROADS TO DISCONNECT HYDRAULICS FROM TRACTOR.

CRUSHING - WHEN ADJUSTING AND CLEANING, AS MACHINE MAY DROP WITHOUT WARNING.

1(A).

CRUSHING - IMPROPER USE OF JACK.

1(B).

CRUSHING - WHEN HITCHING TRACTOR.

1(C).

CRUSHING - PRIOR TO PRIMING HYDRAULIC SYSTEM, AS MACHINE MAY DROP WITHOUT WARNING.

1(D).

SUDDEN LIFT OR DROP OF DRAWBAR, CAUSING SEVERE INJURY IF MACHINE BECOMES UNHITCHED. PENETRATION OF OIL - BROKEN OR BADLY MAINTAINED HYDRAULIC LINES. RUPTURE OF OIL LINES BY OVER PRESSURE WHEN MACHINE COMES TO SUDDEN STOP BEFORE FULLY LOWERED TO WORKING POSITION. COLLISION - HYDRAULICS ACCIDENTALLY LOWERED WHEN MACHINE IS BEING OPERATED IN TRANSPORT.

1(E).

2(A).

2(B).

Figure : 3.2 Risk Assessment Table.

3.33.3

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 3

20/07/2022 12:30:53 PM

Safety Information

IMPORTANT SAFETY NOTICE (MUST READ)

It is the responsibility of the operators to read and understand your manual. Take time to familiarize yourself with the operation of this machine, particularly the safety signs and devices fitted to this machine.

USE OF MACHINE BEYOND ITS LIMITS OR INTENT OF OPERATION WILL VOID WARRANTY.

Slow down in terrain such as rocks, or other difficult operating conditions. • Safe work procedure analysis must be performed before attempting to as- semble this machine. • Do not attempt to operate this equipment under the influence of Drugs & Alcohol. • K-Line Ag can not be held responsible for any injury, death or property damage in the process of assembling this machine. • Ensure hydraulic system is fully primed 3. HYDRAULIC OPERATION & SAFETY - Priming Hydraulic System .

For further information please contact AU: 1800 194 131

3.4

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 4

20/07/2022 12:30:53 PM

Safety Information

SAFETY...YOU CAN LIVE WITH IT YOUR SAFETY & THE SAFETY OF OTHERS IS IMPORTANT

• BE PREPARED! • BE SAFE! • BE AWARE! • BE SEEN!

SAFETY ALERT SYMBOL When you see this symbol, you must be alert to the possibility of injury or death. SIGNAL WORDS The use of signal words, DANGER, WARNING AND CAUTION relate to the safety message. The appropriate signal word is selected when using the following guidelines.

Indicates an imminently hazardous situation that if not avoided WILL result in serious injury or death if proper safety measures are not taken.

Indicates a potentially hazardous situation that, if not avoided COULD result in serious injury or death if proper safety measures are not taken .

Indicates potentially hazardous situation that, if not avoided MAY result in serious injury or death if proper safety measures are not taken.

Figure : 3.3 Danger !

Figure : 3.4 Warning !

Figure : 3.5 Caution !

All operators must understand and abide by maintenance safety procedures set out in this book. It is the responsibility of the Operator (and maintenance personnel) to ensure that on this machine, ALL SAFETY SIGNS AND DEVICES are working correctly and all safety signs are legible.

FAILURE TO OBSERVE THE INSTRUCTIONS OF THIS BOOKLET COULD RESULT IN SERI- OUS INJURY OR DEATH.

3.53.5

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 5

20/07/2022 12:30:53 PM

Safety Information

SAFETY DECALS

SAFETY DECAL PLACEMENT

Figure : 3.6 Safety Decal Placement.

DECALS USED ON MACHINE

Figure : 3.7 Decals Used on Machine.

3.6

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 6

20/07/2022 12:30:53 PM

Safety Information

SAFETY DECAL PART NUMBERS

BOM ID

PART NUMBER

DESCRIPTION

(A) 9WD-W022

DECAL. WARNING TRANSPORT SPEED 160MM X 120MM. ORANGE - BLACK ON WHITE

(B) 9WD-C023

DECAL. CAUTION WHEEL NUT TENSION 160MM X 40MM. YELLOW- BLACK

DECAL. WARNING CRUSHING 160MM X 80MM. ORANGE - BLACK ON WHITE

(D) 9WD-D04

DECAL. DANGER ELECTRIC SHOCK 160MM X 80MM. RED - BLACK ON WHITE

(E) 9WD-D01H

DECAL. DANGER CRUSHING WING (HORIZONTAL) 180MM X 70MM. RED - BLACK

(F) 9WD-D01V

DECAL. DANGER CRUSHING WING (VERTICAL) 70MM X 180MM. RED - BLACK

(G) 9WD-W021

DECAL. WARNING OPERATING INSTRUCTIONS 160MM X 60MM. ORANGE - BLACK

(H) 9WD-C04

DECAL. CAUTION SERIOUS INJURY 140MM X 140MM. YELLOW - BLACK

(I) 9WD-I01

DECAL. IMPORTANT DAILY GREASE PURGE 100MM X 40MM. BLUE - BLACK

(J) 9WDW-T5

DECAL. WARNING HIGH PRESS. FLUID 160MM X 80MM. ORANGE - BLACK

(K) 9WDD-T3

DECAL DANGER CRUSHING MACH. IMPLEMENT 160MM X 80MM. RED - BLACK

(L) 9WD-W024

DECAL. WARNING HYDRAULIC PRIME 160MM X 60MM. ORANGE - BLACK ON WHITE

(M) 9WD-W10

DECAL. WARNING PINCH POINT 100MM X 70MM. ORANGE - BLACK ON WHITE

(N) 9WD-W01

DECAL. WARNING STEPPING ON WHEELS 160MM X 60MM ORANGE - BLACK ON WHITE

(O) 9WD-D01

DECAL. DANGER UPTHRUST 200MM X 70MM. RED - BLACK ON WHITE

(P) 9WD-R01

DECAL. RAM STOP COMBINATION 300MM X 80MM. MULTI-COLOUR

(Q.1A) 9WD.F01DC6TPI (Q.2A) 9WD.F01TC2TPI (Q.2B) 9WD.F01TC3TPI (Q.2C) 9WD.F01TC4TPI (Q.2D) 9WD.F01TC5TPI

Q.1A Q.2A Q.2B Q.2C Q.2D

DECAL DEPTH CONTROL 6 TURNS PER INCH 100 X 70 DECAL TILT CONTROL 2 TURNS PER INCH 100 X 70 DECAL TILT CONTROL 3 TURNS PER INCH 100 X 70 DECAL TILT CONTROL 4 TURNS PER INCH 100 X 70 DECAL TILT CONTROL 5 TURNS PER INCH 100 X 70

(R) 9WD-S01

DECAL. 32-KMH/ 20-MPH 190MM X 80MM. RED - BLACK ON WHITE

(T) 9WD-H02

DECAL. 5 COLOUR HYDRAULIC COLOURS 160MM X 100MM. MULTI-COLOUR DECAL.

(U) 9WD-I02

DECAL. IMPORTANT DISC BOLT RETORQUE 100MM X 80MM. BLUE- BLK

(W) 9WD-F04

DECAL 5 COLOUR FOLD-UNFOLD 280MM X 180MM. RED - BLACK ON WHITE

(XA) 9WD-I-425-65-225 (XB) 9WD-I-500-60-225 (XC) 9WD-I-400-60-155

XA XB XC

DECAL TYRE PRESSURE + WHEEL NUT TORQUE - 425/65R22.5 DECAL TYRE PRESSURE + WHEEL NUT TORQUE - 500/60R22.5 DECAL TYRE PRESSURE + WHEEL NUT TORQUE - 400/60R15.5

(Y) 9WD-WD1

DECAL. WHEEL DEPTH 330MM X 140MM. BLACK

Figure : 3.8 Safety Decal Part Numbers.

3.73.7

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 7

20/07/2022 12:30:53 PM

Safety Information

DECALS

NOTE: NOT ALL DECALS GO ON ALL MODELS. (See SAFETY INFOR- MATION Safety Decal Placement)

(A) 9WD-W022

(B) 9WD-C023

(F) 9WD-D01V

(G) 9WD-W021

(D) 9WD-D04

(H) 9WD-C04

(E) 9WD-D01H

(I) 9WD-I01

3.8

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 8

20/07/2022 12:30:54 PM

Safety Information

(J) 9WDW-T5

(M) 9WD-W10

(K) 9WDD-T3

(N) 9WD-W01

(L) 9WD-W024

(O) 9WD-D01

(P) 9WD-R01

(R) AUS SPEED STICKER MAX 32KPH/20MPH

3.93.9

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 9

20/07/2022 12:30:55 PM

Safety Information

(Q.2A) 9WD.F01TC2TPI

(Q.2B) 9WD.TC3TPI

(Q.1A) 9WD.F01DC6TPI

(Q.2C) 9WD.F01TC4TPI

(Q.2D) 9WD.TC5TPI

(U) 9WD-I02

(T) 9WD-H02

(W) 9WD-F04

NOTE: Wheel depth sticker: white with cut outs (shown as black)

(XA) 9WD-I-425-65-225

(XB) 9WD-I-500-60-225

(Y) 9WD-WD1

(XC) 9WD-I-400-60-155

3.10

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 10

20/07/2022 12:30:56 PM

Safety Information

LOGO STICKERS

FLEXI MULCH STICKER: 530 X 95MM (1 x each side of mainframe)

Figure : 3.9 (K-Line Fleximulch Part No : 9DEB04.530.95-01)

K-LINE AGRICULTURE STICKER: 350 X 125MM (1 x back of mainframe)

Figure : 3.10 (K-Line Ag Part No: 9DEB01.350.110-01)

Centre between arrows shown in images below.

Figure 31 Figure : 3.11 Side View Logo

Figure : 3.12 Back View Logo

3.113.11

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 11

20/07/2022 12:30:57 PM

Safety Information

SAFETY SIGN CARE • Keep safety signs clean and legible at all times. • Replace safety signs that are missing or have become illegible. TO ORDER SAFETY DECALS CONTACT: Australia: K-Line Agriculture

• Replaced parts that displayed a safety sign should also display the current sign.

USA: Contact the dealer your machine was purchased from.

PO Box 340 74 Young Rd Cowra NSW 2794 Email: sales@k-line.net.au Free-call: 1800 194 131

HOW TO INSTALL SAFETY SIGNS: • Be sure that the installation area is clean and dry. • Decide on the exact position before you remove the backing paper. • Remove the smallest portion of the split backing paper.

• Align the decal over the specified area and carefully press the small portion with the exposed sticky backing in place. • Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place. • Failure to comply could result in serious injury or death.

Figure : 3.14 Safety Decal Placement. (3. SAFETY INFORMATION - Safety Decal Placement)

Figure : 3.13 Locate Where Necessary.

3.12

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 12

20/07/2022 12:30:57 PM

Safety Information

HYDRAULIC OPERATION & SAFETY

HYDRAULIC SYSTEM FAILURE

IN THE EVENT OF HYDRAULIC SYSTEM FAILURE OR HYDRAULIC HOSE RUPTURE, YOU MUST FOLLOW THE STEPS SET OUT BELOW:

ESCAPING HYDRAULIC FLUID IS DANGEROUS AND CAN CAUSE SERIOUS INJURY OR DEATH.

STEP 1: PREPARE FOR SHUTDOWN. • Immediately return hydraulic lever to neutral position. • Stop operating machine. STEP 2: SHUTDOWN THE EQUIPMENT. • Use hydraulic lever to lower machine to ground (if in raised position). STEP 3: ISOLATE THE EQUIPMENT. • Freely operate remote levers to release residual pressure from system. • If tractor is equipped, place levers in float position. • Shut down tractor. STEP 4: APPLY THE LOCKOUT / TAG-OUT DEVICE. • Disconnect all hydraulic hoses from tractor remotes. • Place Lockout or Out of Service Tags on all hoses.

STEP 5: CONTROL THE STORED ENERGY. • Ensure no hydraulic pressure remains in the system. Slowly release bleed tap (if equipped), or slightly loosen one hydraulic connection on each circuit to allow any re- maining fluid under pressure to be released. STEP 6: VERIFY ISOLATION OF EQUIP- MENT. • Double check the steps and verify that the equipment has been shut down and has the Lock and Tag Labels evident to prohibit operation. Have repairs carried out and defective parts replaced. Do not re-connect to tractor or other hydraulic power source, un- til system has been fully tested.

3.13.13

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 13

20/07/2022 12:30:57 PM

Safety Information

HYDRAULIC OPERATION *OPTIONAL HYDRAULIC ROLLER

WARNING Hydraulic fluid escaping under pressure can have sufficient force to cause injury. Keep all hoses and connections in good serviceable condition. Failure to heed may result in serious personal injury or death. Escaping hydraulic fluid under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving the pressure before disconnecting lines or performing work on the system. Make sure hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condi- tion before applying pressure to the system. Use a piece of paper or cardboard, NOT BODY PARTS, to check for suspected leaks. Wear protective gloves and safety glasses or goggles when working with hydraulic systems. DO NOT DELAY! If an accident occurs, see a doctor familiar with this type of injury immediately. Any fluid injected into the skin or eyes must be treated within a few hours or gangrene may result.

HYDRAULIC HOSE HOOK UP • For ease of hook up, hose grip handles are color coded. • The same color is used for each hydraulic circuit. • To distinguish between EXTEND and RETRACT, hose grips are marked accordingly. • Clean hydraulic hose breakaway ends before connecting to tractor.

• Hose grip circuits are color coded and marked accordingly for In & Out. • After disconnecting tractor, ensure hydraulic hoses are safely stored in the hose holder.

ENSURE HYDRAULIC SYSTEM IS FULLY PRIMED BEFORE USE

PRIMING HYDRAULIC SYSTEM • Fully extend and retract hydraulic cylinders. • Repeat 3-4 times and hold lever extended each way for 10 to 15 seconds to release air from the system. If problem exists hold hydraulic lever under pressure, until air is fully released from system.

3.14

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 14

20/07/2022 12:30:58 PM

Safety Information

HYDRAULIC COLOUR CODES

HOSE GRIP COLOR CODES

RECOMMENDED PORT NUMBER

COLOUR FROM JUNE 2021

COLOUR PRE JUNE 2021

FUNCTION

RED

WHEEL LIFT

RED

2 3 4 5

FORE & AFT (TILT)

BLUE

YELLOW

WING FOLD

YELLOW

GREEN

ROLLER (OPTION)

GREEN

BLUE

JACK LIFT

ORANGE

GREEN YELLOW

Figure : 3.15 Hose Grip Colour Codes.

Figure : 3.16 Colour Pre June 2021.

WHEEL CIRCUIT

out

extend

retract

FOR & AFT (TILT) CIRCUIT

out

extend

retract

WING CIRCUIT

out

extend

retract

ROLLER CIRCUIT

out

extend

retract

JACK CIRCUIT

out

extend

retract

Figure : 3.17 Hydraulic Circuit Colour Codes.

3.153.15

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 15

20/07/2022 12:31:02 PM

Safety Information

HOOKING / UNHOOKING TO TRACTOR OPERATING INSTRUCTIONS

HITCHING TO TRACTOR 1. Keep well clear when backing up to machine. 2. Shut down tractor. 3. Secure all 3 Point Linkage pins and linch pins in place. 4. Lock up 3 Point Linkage anti sway stabilser system on tractor. 5. Both linkage arms must be set level. 6. Plug in electrical lead to tractor connection (if provided). UNHITCHING 1. Lower implement on to firm, level ground. *Roller should be lowered until it is in contact with ground. 2. Shut down tractor. 3. Remove all 3 Point Linkage pins. 4. Unplug electrical lead from tractor connection (if provided).

Figure : 3.18 Danger! CRUSHING HAZARD.

3.16

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 16

20/07/2022 12:31:02 PM

Field Operation

FIELD OPERATION

WARNING: USE OF MACHINE BEYOND ITS LIMITS OR INTENT OF OPERATION WILL VOID WARRANTY.

SPEED RANGE • 8-15km/hr (5-9 mph). • Speed variable to suit conditions. NOTICE: Slow down in terrain such as rocks or other difficult operating conditions. WARNING In field adjustments machine must be: • Lowered to ground OR • Placed in raised position with all safety locks engaged with engine shut down.

IT IS THE RESPONSIBILITY OF THE OPERATORS TO: Read and understand your manual. Take time to familiarize yourself with the operation of this machine, particularly the safety signs and devices fitted to this machine.

FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY OR DEATH.

4.14.1

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 1

20/07/2022 12:31:02 PM

Field Operation

FLEXIMULCH START UP TIPS

THIS IS A GUIDE ONLY AND MUST BE READ IN CONJUNCTION WITH INSTRUCTION MANUAL.

1. TILT ADJUSTMENT (SETTING TO REDUCE SIDEWAYS TRACKING) • Start with front disc 20mm higher than back discs. • Follow diagram for tilt settings. 4. FIELD OPERATION - Tracking Adjustments . • To adjust, turn front adjuster and lock. 2. FRONT LATERAL DISC POSITIONING • Front lateral disc positioning is factory set for standard operating conditions. • If adjustment is needed follow 4. FIELD OPERATION - Lateral Front Disc Gang Positioning . 3. SPEED RANGE • 8-15km/hr. (5-9mph). • Greater activity occurs at higher speeds. • Slow down in rough terrain (such as rocky country). 4. HEADLANDS/TURNING • Always raise machine when on headlands and when turning. 5. ROAD TRAVEL SPEED LIMIT • 32kmh (20mph). ENSURE THAT ALL DISCS ENGAGE WITH THE SOIL FOR POSITIVE ROTATION.

4.2

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 2

20/07/2022 12:31:02 PM

Field Operation

ALIGNMENT OF DISCS FROM DISC HUB ORIENTATION The alignment of discs on the FlexiMulch can be adjusted to suit soil and trash conditions

Figure : 4.1 Alignment Of Discs

The angled hub design allows for adjustment of the working angle/pitch of the disc. A more aggressive angle is better suited for drying out of soil. The single notch in the back of the hub and the notch in the bottom of the arm aid in setting the hub orientation.

Figure : 4.2 Disc View

Figure : 4.3 Disc Hub

4.34.3

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 3

20/07/2022 12:31:02 PM

Field Operation

TRACKING ADJUSTMENTS ENSURE DEPTH SETTINGS ARE EVEN ACROSS THE ENTIRE WIDTH OF MACHINE BEFORE ADJUSTING FRONT & REAR DISC GANG DEPTH RELATIONSHIP.

TRACKING TO THE LEFT

TRACKING TO THE RIGHT

Figure : 4.4 Tracking to the Left.

Figure : 4.5 Tracking to the Right.

✓

Figure : 4.6 Tracking Balanced.

REAR DISCS GANGS WORK SLIGHTLY LOWER THAN FRONT DISCS NOTE: Where difficult trash conditions are encountered ensure rear discs are set deep enough to positively rotate in the soil. NOTE: Due to the nature of this machine, some overlap should be allowed for side tracking as soil types and conditions can vary within any given run.

4.4

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 4

20/07/2022 12:31:02 PM

Field Operation

FRONT DISC GANG LATERAL POSITIONING STANDARD FACTORY SETTING

Figure : 4.7 Front Disc Gang.

RECOMMENDED SPACING - LATERAL DISC GANG DISC SIZE X DIMENSION FOR FLEXIMULCH: 22” 40MM

Figure : 4.8 Recommended Spacing - Australia.

Measurements may vary according to diameter and disc concavity. Recommended to increase space ¼” per inch of blade wear.

4.54.5

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 5

20/07/2022 12:31:03 PM

Field Operation

LATERAL FRONT DISC GANG POSITIONING

REAR VIEW OF DISC PROFILE

The disc positioning system is used for maximum soil disturbance, reduced ridging and weed control. Adjustment can also be made to compensate for disc wear. ADJUSTMENT PROCEDURE *NB - Be sure machine is tracking in line before at- tempting to make this adjustment. • Start with factory settings: 4. FIELD OPERATION - Front Disc Gang Lat- eral PositioningStandard Factory Setting. • Test run at normal operating speed and stop quickly. • Check for ridges of undug soil. Follow ridges into machine and identify which direction to adjust. See diagrams on this page • To remove any ridges, only adjust front side- ways in small increments ½” or 12mm. • Re-check in hard soils as Jump Arms tend to flex more. REMEMBER, FULL GROUND DISTURBANCE STARTS AT 2 ½” 60MM

Figure : 4.10 Rear Disc Gang Fixed Position

Adjustable Front Gang

Left

Right

Top Elevation

Soil Throw

Figure : 4.11 Adjustment Right.

Soil Throw

Move Front Gang Right to Cut Out (A) Left to Cut Out (B)

(A)

(B)

(A)

Cross Sectional View Of Soil Distrubance

Figure : 4.9 Adjustable Front Gang

Figure : 4.12 Adjustment Left.

Move Front Gang Right To Cut Out (A) Left To Cut Out (B)

4.6

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 6

20/07/2022 12:31:03 PM

Field Operation

FRONT DISC GANG LATERAL POSITIONING

Slide Bolts

Slide Adjustment Mechanism

ADJUSTMENT PROCEDURE Loosen main retaining bolts on slide mecha- nism. • Turn slide adjustment to adjust to right or left • Lock slide bolt arrangement and tighten main retaining bolts (380ft lb / 500Nm ten- sion)

Left

Right

Figure : 4.13 Lateral Adjustment.

Height Adjustment Setting

Fore & Aft Adjustment

SIDE COULTER ADJUSTMENT Series of holes are provided for disc height and front to back positions for optimum furrow filling.

Angle Adjustment

Figure : 4.14 Side Coulter Adjustment.

4.74.7

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 7

20/07/2022 12:31:03 PM

Field Operation

USEFUL HINTS

• Cross working at 15 degrees off line gives better leveling and trash clearance. • Full ground disturbance starts at 63.5mm (2.5 inches). • Adjustment should be made to compensate for disc wear and concavity. TO IMPROVE WEED CONTROL AND FOR BETTER SOIL DISTURBANCE • Adjust lateral disc positioning. • Ensure machine is traveling in line. • Increase depth to cut. • Replace discs. BLOCKING IN EXCESSIVE TRASH • Lower rear discs gang to drive better in soil. • Adjust angle of lift soil deflector to allow greater flow.

• Try reducing speed slightly. CLOGGING IN WET SOILS • Raise working depth. • Raise front discs. • Give soil more time to dry out.

RAM STOP COMBINATIONS

NOTE- INCHES DISPLAYED DO NOT INDICATE DIGGING DEPTH

Figure : 4.15 Ram Stop Combinations.

4.8

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 8

20/07/2022 12:31:03 PM

Maintenance

MAINTENANCE

MAINTENANCE & SAFETY • Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. • Make sure maintenance area has plenty of ventilation. Beware, exhaust fumes may cause asphyxiation. • Prior to commencing work, IDENTIFY ALL HAZARDS! Use control measures to elimi- nate these dangers. • Use blocks to support frame of machine on level area free of obstruction. • Always use a safety support and chock the wheels. • Never use only an implement jack to support the machine when doing maintenance. • Never work under raised machine unless all components are securely positioned and locked. • Engage all safety transport locks, chock wheels and front drawbar for temporary service if machine is in free standing mode. • A fire extinguisher and first aid kits should be kept readily accessible while performing maintenance on this equipment. • Follow the torque chart in this manual when tightening bolts and nuts 5. MAINTENANCE - Bolt Torque Tables. • Refer to bolt torque chart for head identifica- tion marking 5. MAINTENANCE - Bolt Torque Tables. • Always replace bolts with specified grades. • Where replacement parts are necessary for periodic maintenance and servicing, genuine factory replacement parts must be used to restore your equipment to original specifica- tions. • Always use approved lifting equipment. • If equipment has been altered in any way from original design, the manufacturer does not accept any liability for warranty or personal injury.

• Replace all shields and guards after servicing, before moving. • After servicing, be sure all tools, parts and service equipment are removed. • The machine is identified by the serial number on the metal plate on the machine. When requesting spare parts or maintenance service, please indicate the model and number of your equipment to ensure prompt and efficient attention. • K-Line Agriculture spare parts and acces- sories have been specifically designed and developed for the machines produced. We would call your attention to the fact that non-genuine parts and accessories are not recommended by K-Line. Use of non-genuine parts and accessories releas- es K-Line from all liability and makes the warranty void. • The installation and/or use of non-genuine parts may, because of technical characteris- tics of construction, modify or influence the performance of the machine negatively.

5.1 5.1

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 1

20/07/2022 12:31:03 PM

Maintenance AFTER DELIVERY CHECK LIST

• Check all pivot pins are fastened and anchor bolts are correctly tensioned. Follow tension specification, see metric & imperial torque tables. 5. MAINTENANCE - Bolt Torque Tables. • Check discs and disc bolt tension to specified torque 250ft lb / 340nm. 2. GENERAL INFORMATION - Bolt Tension. • Ensure all appropriate safety decals are securely attached to machine. 3.SAFETY INFORMATION - Safety Decal Placement. • • Check all safety mechanisms are in place and operating correctly. • Lubricate heavy rear roller bearings. 5. MAINTENANCE - Heavy Duty Roller Bearing Fitting Instructions. • Check instruction manual has been stored with machine.

5.2

2300D SERIES FLEXIMULCH

OPERATOR & SAFETY MANUAL

2300D Fleximulch op book.indb 2

20/07/2022 12:31:03 PM

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56

www.k-line.net.au

Made with FlippingBook - Online Brochure Maker