Controls
Controls
SensorSmart Wireless Control System Explained
SensorSmart Commissioning
Qualified Bluetooth Mesh
Web App (Location-Independent Preconfiguration)
IOT Enabled Luminaire
Building Plan
Control Element
IOT Cloud
DALI 2.0 Converter
Mobile App (On-Site Commissioning)
Sensor
DALI 2.0 Luminaire
The SensorSmart system uses the standardised Qualified Bluetooth Mesh (QBM) wireless communication protocol to transmit control and setting information between the devices in the system. This is based on the same Bluetooth communication technology used in mobile phones. Some of the devices may be controlled directly e.g. LED Drivers in light fittings with the Bluetooth transmitter / receiver built inside, others may have a converter that allows a non-wireless device to be linked to the wireless system, e.g. a Bluetooth to DALI converter for adding standard wired DALI dimmable drivers or groups of drivers into the system
Control Device
Control Gear
Luminaire
QUALIFIED BLUETOOTH ® MESH
DALI LED Driver
LED Luminaire
QBM DALI Converter
DALI Sensor
All the nodes send messages to each other forming a ‘mesh’ of communication between all.
The result is a very easy to install and operate control system for general lighting with daylight-linking and motion sensing capabilities, particularly ideal for retro-fit applications where adding cables is difficult or impossible.
9
Call Us: +44 (0) 2393 870 050 Email: sales@qvislighting.com Visit our Website: www.qvis.co.uk/lighting
Information is subject to change without notice.
Made with FlippingBook - Online magazine maker