Hardened conversion jaws
■ For matching of top jaws to chucks with different jaw interface ■ If you have any questions in advance, please contact sales@smw-autoblok.de
Interactive PDF available at www.smw-autoblok.com
Conversion jaw type AD 10
Dimensions Serration chuck side (please mark)
1/16“ x 90° 3/32“ x 90°
1.5 x 60°
3 x 60°
S2 mm Serration jaw side (please mark)
S 1
1/16“ x 90° 3/32“ x 90°
1.5 x 60°
3 x 60°
S1
B L
mm mm
mm mm
H
H
Chuck manufacturer Chuck type + Size
L
S 2 B
Fine serration on both sides. T-nuts and bolts are special according to the existing top jaws.
Conversion jaw type AD 50
Dimensions Serration jaw side (please mark)
1/16“ x 90° 3/32“ x 90°
1.5 x 60°
3 x 60°
mm mm mm mm
mm mm mm
S1
B L b
H
L
a
S 1
S2
Chuck manufacturer Chuck type + Size
H
Tongue and groove on the chuck and fine serration on the jaws. T-nuts and bolts are special according to the existing top jaws.
b
S 2 B
a
Conversion jaw type AD 30
Dimensions Serration chuck side (please mark)
1/16“ x 90° 3/32“ x 90°
1.5 x 60°
3 x 60°
S2 mm Serration jaw side (please mark)
L
S 1
1/16“ x 90° 3/32“ x 90°
1.5 x 60°
3 x 60°
S1
B L b
mm mm mm
mm mm mm
H
H
a
a
Chuck manufacturer Chuck type + Size
b
S 2
B
Fine serration on both sides. The conversion jaw has a slot so that it can match different bolts patterns.
Conversion jaw type AD 80
Dimensions Serration chuck side (please mark)
1/16“ x 90° 3/32“ x 90°
1.5 x 60°
3 x 60°
mm mm mm mm
mm mm mm
D
S1 H1 H2 S2
B L a b
S 1
a
b
H 1
Chuck manufacturer Chuck type + Size
H
2
Tongue and groove on the jaw and fine serration the chuck. The size and position of the holed D are depending on the existing T-nuts.
S 2
L
B
160 SMW-AUTOBLOK
Made with FlippingBook Publishing Software