UGE + FGH
Grippers
Request or download: www.smw-autoblok.de JAWS-CATALOG
UGE 30
Gripper for prism jaws and fixtures:
Id. No. 089822, solid carbide
For external and internal gripping of rectangular parts. For chuck jaws, fixture jaws and fixtures. Front mounting of bolt. Gripper seat: drilling and tapping can easily be done Bottom of seat can be either 120° (standard drill tool) or fl at. For high production hardening of gripper pocket is recommended. Torx screw driver Id. No. 085961
9,5
Parts included: Gripper with Torx screw
Mounting instruction:
15
1. Drilling 12.7 Ø bottom of seat 120° or flat 2. Tapping of thread
6 (~8,9)
8
7
4
prism jaws
vise
optional
FGH 33
FGH 34
Inclined grippers with pull-down effect:
Id. No. 71400133 Carbide Tipped with 12 points
Id. No. 71400134 Carbide Tipped with 4 blades
For external clamping. Very short and forward-positioned clamping area. Rear mounting of bolts. Inclined gripper seat are easy to be machined. For high production hardening of gripper seat is recommended.
11,9
11,9
M5
M5
9,525
14,3
14,3
9,525
Parts included: Gripper without screw
Mounting instruction for FGH grippers:
Ø10,5
1. With 15° inclined top-jaw, mill the Ø 14.3 gripper seat 2. Drill Ø 5.5 as shown on the drawing. 3. Drill Ø 10.5 for the screw’s head.
Ø5,5
SMW-AUTOBLOK 81
Made with FlippingBook Publishing Software