G14 + G25
Precision gripper
■ With pull down effect
G14 + G25
G-gripper characteristics
Type G grippers have a stop surface for a controlled penetration of the grip tooth.
The workpiece is clamped concentric on the stop surface , so that the clamping dia. and the machining dia. are concentric.
The high precision of the gripper guarantees concenricity even after replacing worn out grippers.
Highest torque transmission is guaranteed with the combination of friction and positive drive.
The geometry of the gripper creates a pull down effect on the workpiece.
TIN coated high speed steel for long life.
You can select the corresponding gripper for all applications according to the grind stock allowance.
Stop surface
Gripper with controlled penetration 0.07 - 0.30 mm are standard.
4
Special grippers are available on request.
G14
Mounting dimension
(Light duty version) Material: HSS
G14
12
6
Measured into sharp corner
Gripper G14 fitted without clearance
Carbide milling tool Id. No. 139528
SMW-AUTOBLOK Type Controlled penetration t Id. No.
G14-070 G14-100 G14-125 G14-150 G14-175 G14-200 0.070 0.100 0.125 0.150 0.175 0.200 235615 235616 235617 235618 235619 235620
85
G25
Mounting dimension
(Heavy duty version) Material: HSS
15.8
Measured into sharp corner
Gripper G25 fitted without clearance
10
Carbide milling tool Id. No. 139540
SMW-AUTOBLOK Type Controlled penetration t Id. No.
G25-100 G25-150 G25-200 G25-250 G25-300 0.10 0.15 0.20 0.25 0.30 232704 231275 231276 231277 231278
85
SMW-AUTOBLOK 83
Made with FlippingBook Publishing Software