Many Islands Pipe Lines (Canada) Limited MIPL(C)L
General Terms and Conditions
MIPL(C)L's expense. Shipper may install and operate check measuring and testing equipment which shall not interfere with the use of MIPL(C)L's equipment.
Pursuant to the EGI Act and Measurement Canada Bulletin G-14 (“G- 14”), Measurement Canada (“MC”) has given conditional permission for Point of Receipt sites to be considered Low Intervention Trade Transaction sites (“LITT Sites”) where the use of gas metering equipment without verification and sealing is permitted at the Low Intervention Trade Transaction level. Notwithstanding anything else herein, the following shall apply at LITT Sites:
(a)
The Low Intervention Trade Transactions are subject to the provisions and conditions listed in G-14, a copy of which may be viewed on MC’s website; The Customer agrees that the gas metering equipment at LITT sites has been initially calibrated and will be periodically recalibrated (and reprogrammed where necessary), in accordance with the process outlined in Clauses 5.2 and 5.3 herein; Any measurement disputes arising between the Customer and MIPL(C)L shall be resolved in accordance with the provisions of Clause 5.3 herein;
(b)
(c)
(d) The Customer and MIPL(C)L acknowledge that the conditional permission granted by MC may restrict MC’s ability to successfully conclude a measurement dispute investigation, if MC’s involvement were to be requested; and (e) The Customer and MIPL(C)L agree to the implementation of Low Intervention Trade Transactions in accordance with G-14 and either the Customer or MIPL(C)L has the right to request a revocation of the conditional permission for Low Intervention Trade Transactions in accordance with G-14. 5.2 The accuracy of MIPL(C)L's measuring and testing equipment shall be verified in accordance with common industry standards and at other times upon request of MIPL(C)L or Shipper. Such request is not to be made more often than once per Month. Notice of the time and nature of each test to be conducted at the point of measurement shall be given by MIPL(C)L to Shipper sufficiently in advance to permit Shipper's representative to be present. Tests and adjustments shall be made in the presence of and observed by representatives of both MIPL(C)L and Shipper, if
Page 7
June 1, 2016
Made with FlippingBook Ebook Creator