Make it quicker. Make it easier. Make it yours. Make it Multiaxis.
Popular Multiaxis Toolpaths
Make It Multiaxis Multiaxis machining expands on the traditional 3-axis machine’s motion abilities. Instead of moving along three simple linear axes, Multiaxis machines can move in four or more directions by adding rotary axes and parallel linear axes. Some modern Multiaxis centers can use nine axes, but most use only four or five simultaneously. Launching into the Multiaxis world can be — understandably — daunting. In the past, access to training resources could be limited, and often, the only publicly available material came from forums or user YouTube videos. While these are still valuable resources, Mastercam has taken steps in recent years to make learning easier. Mastercam University is an online learning center full of self-directed courses that walk users through simple and advanced machining topics. It has a full, end-to-end Multiaxis course on all our toolpaths and on standard Multiaxis machining concepts as well.
Unified 5-axis The result of customer feedback, with the Unified toolpath, users need to only select their Machining and Avoidance geometries once before being able to experiment with Cut Patterns. Not needing to reselect geometries every time will save mouse miles and time. Deburr 5-axis Sharp edges are common occurrences on completed parts. Deburring those edges is a challenging manual task, and keeping up consistency is nearly impossible, but Deburr 5-axis automates this process. Swarf 5-axis Sometimes called “Flank-milling”, Swarf 5-axis uses the side of a tool to cut a wall. It is very popular in aerospace milling. Curve 5-axis This toolpath is one of Mastercam’s most popular. The cut pattern follows a curve (a line, a spline, a circle, or a surface edge) that can be wireframe, solid, or surface. Tilt to Avoid Available in Mastercam’s 3D HST Finishing paths, Tilt to Avoid is the fastest way to add Multiaxis motion to a 3-axis toolpath. With just one click, the tool assembly is checked against the machining and avoidance geometries and introduces tilt where necessary to machine the path.
DEBURR 5-AXIS
CURVE 5-AXIS
Mastercam and its Channel Partners have also produced and released extensive official YouTube tutorials on everything from individual toolpath use to fully-fledged examples with real parts. Many Channel Partners also offer training at their locations or will even visit your shop, and all of them will have their own Multiaxis resources and experts to help you make the most of your software. If you want in-person training, reach out to your local Channel Partner as a first step.
SWARF 5-AXIS
To learn more about Mastercam’s Multiaxis solutions, visit mastercam.com/multiaxis.
10
11
Made with FlippingBook Online newsletter maker