BSTR-P – V01 Annex 2 Equipment list
4. BSTR-P WORKING AT HEIGHT PARTIAL REFRESHER
The following equipment is required by the instructor to support the BSTR-P Working at height module. The training provider must select the most relevant products according to the geographic location of the target audience.
Full Body Harness
Work restraint lanyards
Fixed length fall arrest lanyards with an energy absorber
Helmets
Vertical fall arrest system with the following sliders / gliders:
a. Cable guide twist type attachment
b. Cable guide Slot type attachment
c. Cable guide Clamp Type attachment
d. Rail type attachment
Self-Retractable Lifeline (SRL)
Slings*
Karabiner with mandatory automatic closing and locking system
Evacuation and rescue devices
Rope clamp for rescue (enabling lifting/safe disconnection of a loaded rope type fall protection lanyard)
Vertical aluminium ladders
Anchor points**
Note:
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards listed in table A2-4. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
The following equipment is required by the course participant :
Full body harness
Work restraint lanyard
Fixed length fall arrest lanyard(s) with an energy absorber
Slider or glider
*
Global Wind Organisation
www.globalwindsafety.org
107 / 116
Made with FlippingBook - Online magazine maker