BSTR-P - Working at height partial online refresher V01
b. Closed top tool bags
c. Closing hatches and covering openings
d. Staying out of the drop zone of workers at height
PPE REVIEW EXERCISES
30 Min.
The aim of this lesson is to reduce the risk of injury in the wind industry by refreshing the participants skills in the identification and pre-use inspection of fall protection equipment. Furthermore, it will refresh the participants knowledge about basic height rescue, PPE and personal fall protection equipment use.
To successfully complete this lesson each course participant shall be able to:
Demonstrate the ability to correctly perform a pre-use inspection of their working at height PPE (L3 – Skills) Explain the importance of and how to correctly use, manage, and control PPE used for working at height (L3 – Attitude)
Note:
The instructor shall verify the skills in learning objectives using a live video link.
Demonstration of these skills will require the course participant to have this equipment available therefore the course participants should be on-site while performing these skills.
ELEMENT 4.1 - PRE-USE INSPECTION
The instructor shall:
Explain and demonstrate how to perform a pre-use inspection, with a focus on a generic approach, of the following equipment:
a. Harnesses
b. Fall arrest systems
c. Fall restraint systems
d. Self-retractable lines
Note: For a detailed description of the elements of the pre-use inspection for each of the items of equipment in this lesson refer to the GWO BST initial standard Lessons 3 to 6.
Global Wind Organisation
www.globalwindsafety.org
76 / 116
Made with FlippingBook - Online magazine maker