BSTR-P - Working at height partial online refresher V01
ELEMENT 4.2 - CORRECT USE
The instructor shall:
Lead a discussion about the value and importance of correct use and control of fall protection equipment Explain and demonstrate the proper use, management, and control of the following:
a. Harnesses
b. Fall restraint systems
c. Fall arrest systems
THEORY
50 min.
The aim of this lesson is to reduce the risk of short-term and long-term injury when working at height in a wind turbine by refreshing the participants knowledge of working at height theory.
To successfully complete this lesson each course participant shall be able to:
Explain safe and competent work and rescue at height (L2 – Knowledge)
Explain the importance of correctly fitting a harness (L3 – Attitude)
Explain the use of attachment points (L2 – Knowledge)
Explain the use of anchor points (L2 – Knowledge)
Explain how loads and angles can influence the strength of lanyards and slings (L2 – Knowledge)
Explain common fall indicators on equipment (L2 – Knowledge)
Explain the risk of suspension trauma (L2 – Knowledge)
Explain how to use a double and twin fall arrest lanyard (L2 – Knowledge)
Explain how to perform a pre-use inspection of rescue and evacuation kits (L2 – Knowledge)
ELEMENT 5.1 - SAFE AND COMPETENT WORK AND RESCUE AT HEIGHTS
The instructor shall:
Lead a discussion about how to keep oneself and others safe during work at height and rescue situations
Global Wind Organisation
www.globalwindsafety.org
77 / 116
Made with FlippingBook - Online magazine maker