↑ HOME
Brush filters and color adjustments A whole new world of special effects.
Add filters and color adjustments to the brush, in order to create specialized tools. The effect may be applied either to the active layer or to the brush stroke itself (however not both in the same time).
Special tab, Filters section
Effect list tap to select one of the special effects.
Strength (-100 — +100) — (when an effect is active) controls the main parameter of current effect. Usually zero is neutral. This slider is accessible on the main toolbar too
Strength circular slider Slide up or down to adjust the strength of the effect.
Remove (button) (when an effect is active) removes current effect from the brush.
You will see the real-time preview of the effect applied to the entire layer.
Layer tab Effects to be applied to the active layer
Brush tab Effects to be applied to the brush stroke itself
See page 99
Color section These adjustments are the same as Color Adjustment (Tools) used for entire layers or selections. See page 342
Filters These filters are the same as Filters (Tools) used for entire layers or selections. See page 357
Filters section These filters are the same as Filters (Tools) used for entire layers or selections. See page 357 Tip: long-press on a filter thumbnail to compare it with the original fox image
Infinite Painter’s Manual
ref: manual_studio_brush_editor_filters
Brush editor • Page 103
Made with FlippingBook - Online magazine maker