Highly flexible insulated vehicle wires from 0.35 mm 2 to 2.50 mm 2
Developed for ■ Automotive ■ Small bending radii ■ Small cable diameters
Characteristics ■ Temperature resistant
■ Oil resistant ■ DecaBDE-free ■ Flame retardant
■ RoHs conform ■ Acc. to ISO 6722
TSUBAKI KABELSCHLEPP
■ Long lifetime ■ Dynamic loads
Technical specifications Temperature range:
Design Conductor:
– 40 to + 125 °C Minimum bending radius moved: KR min ≥ 5.0 x Ø Test voltage: > 1 kV (30 min.) Operating voltage: Max. 60 V Regulations: Following ISO 6722
Fine-wire stranded conductor El-Cu litz wire bright soft
Core insulation:
TPM
Core color:
On request
Core stranding: Single-core Core identification: TSUBAKI KABELSCHLEPP / conductor cross-section Print distance: Max. 200 mm
Varying parameters possible – please contact us!
Technical information
Mat.-No.
Cross-section
Conductor design
Insulation wall thickness (mm)
Outer diameter (mm)
Conductor resistance bare (Ohm/km)
(mm 2 )
50291
0.35
180 (+/-10 %) x max. 0.05
min. 0.20
1.35 (+/-0.05)
max. 54.4
50290
0.50
256 (+/-10 %) x max. 0.05
min. 0.22
1.60 (+/-0.05)
max. 37.1
50289
0.75
392 (+/-10 %) x max. 0.05
min. 0.24
1.85 (+/-0.05)
max. 24.7
50288
1.00
511 (+/-10 %) x max. 0.05
min. 0.24
2.10 (+/-0.10)
max. 18.5
50287
1.50
392 (+/-10 %) x max. 0.07
min. 0.24
2.35 (+/-0.10)
max. 12.7
50286
2.50
651 (+/-10 %) x max. 0.07
min. 0.28
2.90 (+/-0.10)
max. 7.6
Developed for cable carriers
We are there for you! Phone: (800) 443-4216
13
Made with FlippingBook Digital Proposal Creator