TKP35 | Inner distribution | TS0 · TS1
Divider systems The divider system is mounted on every 2 nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with horizontal shelves) are movable in the cross section (version A) .
For applications with lateral accelerations and applica- tions with the cable carrier rotated by 90°, the dividers can easily be fixed on the crossbar through rotation. The arresting cams snap into the catch profiles in the covers (version B) .
Divider system TS0 without horizontal shelf
a x min [mm]
a c min [mm]
a x grid [mm]
n T min
Vers. a T min [mm]
32
A 3 6 4 – – B 4.5*/5 6 4 2 –
KR
* Only B i 25
a T
a x
a c
a T
6
2
Divider system TS1 with continuous horizontal shelf
VD1
VD2
VD3
VD23 VD123
a x min [mm]
a c min [mm]
a x grid [mm]
n T min
Vers. a T min [mm]
6.7
6.7 5.4 5.4 6.7 2.6
6.7
A B
3 6 4 – 2 4.5*/5 6 4 2 2
14.7
2 1 3
22.7
13.4
22.7
14.7
* Only B i 25
6.7
6.7
KR
The dividers can be moved in the cross section.
a T
a x
a c
a T
6
2
Order example
TS1
.
A
.
3
-
VD1
VD3
-
Divider system
Version
n T
Horizontal shelf
Please state the designation of the divider system (TS0, TS1,...) , the version, and the number of dividers per cross section [n T ]. When using divider systems with horizontal shelf (TS1) , please additionally state the position (e.g. VD1) viewed from the left moving bracket belt. You are welcome to add a sketch to your order.
176
Made with FlippingBook Digital Proposal Creator