Cable carrier configuration | Divider systems
03 Divider systems
3.1 Overview
Vertical and horizontal dividers serve to separate the cables within the cable carrier cross section. These can be arranged evenly next to each other, on top of each other and offset.
As a standard, the divider system is mounted at every 2nd chain link.
TS0
TS1
TS2
TS3
Hole crossbar
3.2 Explanation of the systems
Divider system TS0 without horizontal shelf
Dividers for vertical separation [1] can be installed between all types of crossbars. They efficiently separate the cables to prevent friction between different jacket materials. This provides best possible protec- tion for cables and insulation.
1
Divider system TS1 with continuous horizontal shelf
In addition to the vertical separation with dividers [1], the inner height is divided into several levels with a horizontal horizontal shelf [2] across the entire inner width, systematically layer by layer. This creates order and a clear structure for multiple cables with a similar cross section.
1
2
Divider system TS2 with partial horizontal shelf
This divider system allows all combinations of vertical separation with dividers [1] and partial horizontal horizontal shelf [2] made of aluminum in a 1 mm grid.
1
2
52
Made with FlippingBook Digital Proposal Creator