Cable carrier configuration | Divider systems
Divider system TS3 with horizontal shelf made of plastic partitions
This divider system allows all combinations of vertical separation with dividers [1] and partial horizontal partitions made of plastic [2] or option- ally of aluminum [3] in a 3 mm grid. These can also be retrofitted or changed by rearranging. The twin divider [4] additionally provides the option of subsequent vertical separation.
1 4
2 3
Modern TS3 divider systems (MASTER series) reduce the packaging space required for this to a minimum, providing more cable space.
Width comparison
Width optimization through adapted dividers
238
100
– 17 %*
90
80
4
8
70
Previous divider system TS3 with crossbar RSH/RE
60
50
198
40
30
2.5
20
4
10
Significant space saving with same filling capacity through the new divider system TS3 with crossbar RSH/RE
0
*For inner width B i = 238 mm with crossbar option RE
Cable routing with hole crossbars Crossbar LG
Individually manufactured hole crossbars allow the inner distribution to be ideally adapted to your cables. The hole crossbars can be guided in the neutral bending line. Cable carriers with aluminum crossbars can therefore be ordered customized to the millimeter. The hole crossbar system is also very easy to assemble because the cable openings are freely accessible by removing the top part.
53
Made with FlippingBook Digital Proposal Creator