Cable carrier configuration | Strain relief elements 05 Strain relief elements
5.1 Overview and explanation of strain relief options
The strain relief for the cables depends on cable type, length of the cable carrier and installation position. Depending on the cable carrier type and specific application, we offer different strain relief options.
LineFix ® clamps These clamps can be positioned next to each other with a C-rail. The C-rail is integrated into the end bracket or has to be fastened separately in front of it. Detailed information can be found in chapter Accessories from page 716. Strain relief combs Strain relief combs can be used to connect the cables to the existing teeth with cable ties. The strain relief combs are integrated into the end bracket or have to be fastened separately in front of it. Detailed information can be found in chapter Accessories from page 718. SZL strain reliefs The SZL strain reliefs hold the cables with half shells and fix them in position with detachable clamps. The C-rail is integrated into the end bracket or has to be fastened separately in front of it. Detailed information can be found in chapter Accessories from page 720. Block clamps Block clamps are usually used for hoses and hold these with two half shells bolted together, which can be attached to a C-rail. The C-rail is integrated into the end bracket or has to be fastened separately in front of it. Detailed information can be found in chapter Accessories from page 721.
More on the use of strain reliefs and assembly information can be found in the configuration guidelines from page 48.
56
Made with FlippingBook Digital Proposal Creator